Useful resources for getting started
Modern engines for dummies
- Understanding the torque-based ECU control strategy: https://www.motorsport-developments.co.uk/Understanding_Ford_Ecoboost_Torque_Control.html. This is a good high-level look at the control strategy of an ECU.
- Bosch's marketing video about their GDI components: https://youtu.be/LjJSbHxIvnM. This includes a gentle introduction to exhaust scavenging and it's impact on turbo lag. If you are thinking about tuning VANOS and wondering where to start, this and MHD's VANOS tuning guide are your goto places (https://github.com/dmacpro91/BMW-XDFs/blob/master/N54/N5X%20tuning%20spreadsheet%2003082016.xlsx).
N54 and N55 Tuning
There are a lot of similarities but N54 tuning is simpler.
- Anjuna's N55 tuning thread: https://www.e90post.com/forums/showthread.php?t=1693922
- Cobb guide to N55 tuning: https://cobbtuning.atlassian.net/wiki/spaces/PRS/pages/828866941/BMW+N55+Tuning+Guide
- Marshall Hesse-Dreville's N54 tuning spreadsheet: https://github.com/dmacpro91/BMW-XDFs/blob/master/N54/N5X%20tuning%20spreadsheet%2003082016.xlsx. This is especially useful for the description of Vanos.
PID control
Dialling in boost control requires a familiarity with PID error control. Watch this video from Motec a couple of times and you should have enough knowledge to get started.
- Motec's video on PID control: https://www.youtube.com/watch?v=16Clfh5eBzg
Other B58 tuning resources
- ECUTek's B58 tuning guide: https://ecutek.atlassian.net/wiki/spaces/SUPPORT/pages/170557464/BMW+B58+Tuning+Guide
- RFP Tuning's B58 tuning videos: https://www.youtube.com/watch?v=zzqAQwAJrdw
- MHD's excellent repo of tuner pro XDFs: https://github.com/dmacpro91/BMW-XDFs
- MHD+ tuning guide: https://github.com/dmacpro91/BMW-XDFs/blob/master/MHD+_Suite_Tuning_Guide.pdf
Getting tunes off of your car
This area of tuning divides opinions. There are some who are criticise those who examine the tunes on their car as being cheats. Meanwhile others consider that building on previous work is the best way to make progress. One explanation for the tetchiness in this area is that there are a lot of commercial interests tied up in engine calibration but, being software, it is hard to protect these interests. This leads to nervousness that reading tunes off the car will open the way to wider piracy. Nonetheless, tuners who own their own car also own the calibration on it. Our view therefore is that tuners should be able to use existing calibrations as a basis for their own work but should not share them or sell them on without the express permission of the originator.
- ECU bench tool will read Gen 1 B58 ECUs (Bosch MG1 with the SPC5777M chipset): https://www.ecuhelpshop.com/products/ecu-bench-tool-ecu-programmer.html. There are other more expensive professional options available, like autotuner and bitbox.
Creating tunes
- MHD's excellent repo of tuner pro XDFs: https://github.com/dmacpro91/BMW-XDFs
