Apprentice: understanding the MPPSK map: Difference between revisions

From B58 Wiki
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Introduction ==
== Introduction ==
The ''M-Performance power and sound kit'' (MPPSK) is a basic tune that  
The ''M-Performance power and sound kit'' (MPPSK) is a basic tune that
* raises the driver's input torque request a little
* raises the driver's torque request a small amount
* tweaks the throttle maps
* tweaks how the pedal delivers that torque
* raises a couple of limits accordingly
* raises a couple of limits accordingly
* makes a number of changes to exhaust, timing and VANOS for the burbles part of things.
* makes a number of exhaust flap and burble changes. This includes some VANOS adjustments.


Importantly, it does not modify  
Importantly, it does not modify
* airflow calculations
* airflow or boost
* load limits
* load limits
* downpipe or turbo characteristics
* downpipe or turbo characteristics
* fuelling  
* fuelling
* ignition timing. The DME has built in support for burbles so though in practice the burbles do change timing, the tune does not directly modify the ignition timing tables.


The changes for burbles are quite extensive but it is a good idea for tuners starting out not to play with these. It is much easier to use the settings in MHD or BM3 to handle burbles. Burble tunes rely on timing changes that, if done wrong, can damage the engine. That leaves only about ten tables you need to understand.
The changes for burbles are quite extensive but understanding them is optional since MHD, BM3 and MD flasher all have built in support for burbles.


This makes the tune good as
This makes the tune good as
* A way to get your head into the mechanics of tuning.  
* A way to get your head into the mechanics of tuning.
* A base to start your own stage 1 map.
* A base to start your own stage 1 map.
* A way for more advanced tuners to get to grips with tuning for burbles.
* A way for more advanced tuners to get to grips with tuning for burbles.
Line 24: Line 26:


==== Torque request ceiling ====
==== Torque request ceiling ====
'''Ref''': [[DME_table_reference#Torque_request_ceiling|Torque request ceiling]]


'''Brief Description''': BMWtqe_tqc_FlApplStgNorm_T
'''Brief Description''': BMWtqe_tqc_FlApplStgNorm_T
Line 56: Line 60:


==== Max power (monitoring) ====
==== Max power (monitoring) ====
'''Ref''': [[DME_table_reference#Max_power_(monitoring)|Max power (monitoring)]]


'''Brief description''': MoFTrqPtd_pwrMax_C, Maximum performance of the engine.
'''Brief description''': MoFTrqPtd_pwrMax_C, Maximum performance of the engine.
Line 83: Line 89:


==== Max allowed raw speed for signal check ====
==== Max allowed raw speed for signal check ====
'''Ref''': [[DME_table_reference#Max_allowed_raw_speed_for_signal_check|Max allowed raw speed for signal check]]


'''Brief description''': VROHMAX
'''Brief description''': VROHMAX
Line 106: Line 114:


'''Notes''':
'''Notes''':
 
   It is not clear what signal is being checked in the unlikely event the car reaches 400km/h. The MPPSK tune is lifting it out of range, so it is safe to assume this is a nanny that other tunes can also lift.
   It is not clear what signal is being checked in the unlikely event the car reaches 400km/h. The MPPSK tune is lifting it out of range, so it is safe to assume this is a nanny that other tunes can also lift.


==== Maximum indicated torque (Nm) ====
==== Maximum indicated torque (Nm) ====
'''Ref''': [[DME_table_reference#Maximum_indicated_torque_(Nm)|Maximum indicated torque (Nm)]]


'''Brief description''': EngDa_tqInnrMax_C
'''Brief description''': EngDa_tqInnrMax_C
Line 137: Line 147:


==== Max. torque at trans MT ====
==== Max. torque at trans MT ====
'''Ref''': [[DME_table_reference#Max._torque_at_trans_MT|Max. torque at trans MT]]


'''Brief Description''': KL_MDG_MAX_GANG_HS
'''Brief Description''': KL_MDG_MAX_GANG_HS
Line 169: Line 181:


==== Speed-dependent full load line of the engine (Nkw_opt) for manual shift ====
==== Speed-dependent full load line of the engine (Nkw_opt) for manual shift ====
'''Ref''': [[DME_table_reference#Speed-dependent_full_load_line_of_the_engine_(Nkw_opt)_for_manual_shift|Speed-dependent full load line of the engine (Nkw_opt) for manual shift]]


'''Brief Description''': KL_MD_K_MAX_VL_HS
'''Brief Description''': KL_MD_K_MAX_VL_HS
Line 197: Line 211:


'''Notes''':
'''Notes''':
 
 
   These values can be thought of as dynamic torque limits used in the calculation of the driver's wish. Somewhat vaguely, they assist the cars different handling of the pedal relative to the car's speed (and gear). For example, when cruising at 80mph and 30% throttle, that throttle position becomes a base for the throttle map. In any case, we can see that the stock and MPPSK set the values equal to the maximum clutch torque.
   These values can be thought of as dynamic torque limits used in the calculation of the driver's wish. Somewhat vaguely, they assist the cars different handling of the pedal relative to the car's speed (and gear). For example, when cruising at 80mph and 30% throttle, that throttle position becomes a base for the throttle map. In any case, we can see that the stock and MPPSK set the values equal to the maximum clutch torque.


==== Speed-dependent full load line of the engine (Nkw_opt) ====
==== Speed-dependent full load line of the engine (Nkw_opt) ====
'''Ref''': [[DME_table_reference#Speed-dependent_full_load_line_of_the_engine_(Nkw_opt)|Speed-dependent full load line of the engine (Nkw_opt)]]


'''Brief Description''': KL_MD_K_MAX_VL
'''Brief Description''': KL_MD_K_MAX_VL
Line 229: Line 245:


=== Optional accelerator pedal changes ===
=== Optional accelerator pedal changes ===
B58 pedal feel is set using a twofold lookup. First, the range of torque available (vs RPM) is provided by ''Torque request ceiling'' and the driver's pedal position is scaled into this range. Then a relative torque request table is selected according to the driving mode.
The tunerpro XDF's expose relative torque request tables for the sport modes (with and without manual shift selected). If you have the a2l for your platform, you might also want to add the addresses of drive mode with manual switch (KF_MDR_ABV_D_HS) or drive mode with auto (KF_MDR_ABV_D).


==== Relative torque request sport MT 1 ====
==== Relative torque request sport MT 1 ====
'''Ref''': [[DME_table_reference#Relative_torque_request_sport_MT_1|Relative torque request sport MT 1]]


'''Brief description''': KF_MDR_ABV_SPO_HS
'''Brief description''': KF_MDR_ABV_SPO_HS
Line 292: Line 314:
'''Notes''':
'''Notes''':


   The throttle changes are optional. These tables affect pedal feel in the various driving modes (TODO which modes?). The basic idea is to stop the car from getting too jumpy in traffic but give a good sense of power on the open road.
   The throttle changes are optional. These tables affect pedal feel in the various driving modes. The tunerpro XDFs expose sport driving modes. There are also tables for drive (i.e. comfort mode) and ecopro, though these are not described in the XDF. The basic idea is to stop the car from getting too jumpy in traffic but give a sense of power on the open road.


   The MPPSK rescales the x breakpoints and so vectors the torque differently. The x axis is the unmodified torque request (i.e. max torque request x accelerator pedal position) and the y axis is itself the pedal position.
   The MPPSK rescales the x breakpoints and so vectors the torque differently. The x axis is the unmodified torque request (i.e. max torque request x accelerator pedal position) and the y axis is itself the pedal position.
Line 299: Line 321:


==== Relative torque request sport MT 2 ====
==== Relative torque request sport MT 2 ====
'''Ref''': [[DME_table_reference#Relative_torque_request_sport_MT_2|Relative torque request sport MT 2]]


'''Brief description''': KF_MDR_ABV_SPO2_HS
'''Brief description''': KF_MDR_ABV_SPO2_HS
Line 359: Line 383:


==== Relative torque request sport 2 ====
==== Relative torque request sport 2 ====
'''Ref''': [[DME_table_reference#Relative_torque_request_sport_2|Relative torque request sport 2]]


'''Brief description''': KF_MDR_ABV_SPO2
'''Brief description''': KF_MDR_ABV_SPO2
Line 419: Line 445:


==== Relative torque request sport ====
==== Relative torque request sport ====
'''Ref''': [[DME_table_reference#Relative_torque_request_sport|Relative torque request sport]]


'''Brief description''': KF_MDR_ABV_SPO
'''Brief description''': KF_MDR_ABV_SPO
Line 478: Line 506:
   100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000
   100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000


=== More advanced stuff for burbles ===
=== Exhaust flap and burbles settings ===
 
==== Vanos IN (warm) 2 ====


'''Brief description''': GKF_ESPR_NORM_WARM_PF2
==== Vanos settings ====


'''Dimension''': 2D, table
'''Ref''': [[DME_table_reference#Vanos_settings|Vanos settings]]


'''Categories''': Vanos
The VANOS tables are lookups of load and RPM to VANOS ''setpoint'' (a value which modifies the valve opening time relative to the combustion cycle).


'''Unit info''': 1/min, % --> °
To understand the VANOS changes, it helps to look first at the differences to stock. Stock values for the intake side are reduced by 1-5 degrees and there are no changes to the exhaust side.


'''Breakpoints''': Vanos IN (warm) 2 X (autogen) vs Vanos IN (warm) 2 Y (autogen)
Reducing the intake values opens and closes the intake valve ''earlier''. The effect of this reduction is to increase valve overlap.


'''Base''':
There are no changes to the valve lift so the intake duration remains unchanged. In the graph below, the effect of valve lift would be to move the bell curve up or down. This does not change in MPPSK, which simplifies matters.


        600  800  1000  1250  1500  1750  2000  2500  3000  3500  4000  4500  5000  5500  6000  7000
[[File:vanos-1.png|Vanos overlap vs setpoint]]
  14.0 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5
  18.0 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5
  22.0 117.5 117.5 117.5 117.5 117.5 114.8 112.1 109.0 107.7 106.8 106.8 107.3 108.9 111.4 114.2 117.5
  27.0 117.5 117.5 117.5 116.4 111.0 106.2 102.7  99.6  97.5  97.2  97.5  98.7 100.9 103.7 106.8 113.8
  35.0 117.3 115.0 110.8 104.6  99.4  95.6  93.1  89.4  87.7  87.2  87.7  89.1  91.0  94.0  97.1 104.0
  45.0 107.1 104.3 100.3  95.3  90.9  87.3  85.1  82.3  80.8  80.1  80.4  80.9  82.1  84.9  88.6  96.8
  55.0  99.6  94.6  90.6  86.1  83.0  80.9  79.3  77.0  75.5  75.0  75.0  76.2  78.4  81.1  84.8  94.1
  70.0  96.4  93.1  90.6  88.0  86.3  84.6  83.0  78.4  75.2  75.0  75.0  75.9  78.0  80.8  84.3  93.5
  90.0  94.0  93.6  92.9  90.9  87.6  85.4  85.3  83.6  80.7  79.8  80.2  82.3  85.7  89.6  94.5 102.0
110.0  99.4  99.0  98.4  95.3  92.3  90.9  90.4  88.2  86.0  85.7  86.6  88.4  90.7  93.8  97.4 102.4
140.0 102.8 102.6 102.2  97.9  96.6  96.2  96.0  93.4  92.4  92.4  93.9  95.0  96.2  98.0  99.9 101.9
160.0 103.3 103.1 102.8  98.7  98.1  98.0  97.8  95.2  94.6  94.6  96.1  97.0  98.0  99.2 100.5 101.7


'''Difference''':
Vanos maps have a characteristic ''fisherman's chair'' shape. There are saddles in both the load and RPM axes with the minimums at about 70% load and 3500 RPM. As the car accelerates, load and RPM increase, so the setpoint will track diagonally across the map (and there is a saddle in that direction too).


        600  800  1000  1250  1500  1750  2000  2500  3000  3500  4000  4500  5000  5500  6000  7000
[[File:Mppsk-vanos-w2-wf.png|MPPSK intake setpoint]]
  14.0  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3
  18.0  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3
  22.0  -2.3  -2.3  -2.3  -2.3  -2.3  -2.3  -2.2  -2.2  -2.2  -2.1  -2.1  -2.1  -2.2  -2.2  -2.3  -2.3
  27.0  -2.3  -2.3  -2.3  -2.3  -2.2  -2.1  -2.1  -2.0  -1.9  -1.9  -1.9  -2.0  -2.0  -2.1  -2.1  -2.3
  35.0  -2.3  -2.3  -2.2  -2.1  -2.0  -1.9  -1.9  -1.8  -1.8  -1.7  -1.8  -1.8  -1.8  -1.9  -1.9  -2.1
  45.0  -2.1  -2.1  -2.0  -1.9  -1.8  -1.7  -1.7  -1.6  -1.6  -1.6  -1.6  -1.6  -1.6  -1.7  -1.8  -1.9
  55.0  -2.0  -1.9  -1.8  -1.7  -1.7  -1.6  -1.6  -1.5  -1.5  -1.5  -1.5  -1.5  -1.6  -1.6  -1.7  -1.9
  70.0  -1.9  -1.9  -1.8  -1.8  -1.7  -1.7  -1.7  -1.6  -1.5  -1.5  -1.5  -1.5  -1.6  -1.6  -1.7  -1.9
  90.0  -1.9  -1.9  -1.9  -1.8  -1.8  -1.7  -1.7  -1.7  -1.6  -1.6  -1.6  -1.6  -1.7  -1.8  -1.9  -2.0
  110.0 -2.0  -2.0  -2.0  -1.9  -1.8  -1.8  -1.8  -1.8  -1.7  -1.7  -1.7  -1.8  -1.8  -1.9  -1.9  -2.0
  140.0 -2.1  -2.1  -2.0  -2.0  -1.9  -1.9  -1.9  -1.9  -1.8  -1.8  -1.9  -1.9  -1.9  -2.0  -2.0  -2.0
  160.0 -2.1  -2.1  -2.1  -2.0  -2.0  -2.0  -2.0  -1.9  -1.9  -1.9  -1.9  -1.9  -2.0  -2.0  -2.0  -2.0


'''Modified''':
Some properties of this are:
# Typically the B58 idles at <20% load and 650 RPM. Here, the vanos setpoint is high. This ensures low valve overlap and thus a good idle. The MPPSK has a touch more overlap than stock, perhaps to make the idle sound more lumpy?
# As soon as any load is put on the engine, setpoints drop, which increases overlap to improve the engine's efficiency and introduce the EGR required to reduce lethal NOx emissions to targets.
# As RPM (and load) increase, the timing of the intake valve is retarded (i.e. the setpoints increase). The values are choosen (presuably correctly) to optimize cylinder charging and thus maximise power.


          600  800  1000  1250  1500  1750  2000  2500  3000  3500  4000  4500  5000  5500  6000  7000
==== Vanos IN (warm) 1 ====
  14.0  115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2
  18.0  115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2 115.2
  22.0  115.2 115.2 115.2 115.2 115.2 112.5 109.9 106.8 105.5 104.7 104.7 105.2 106.7 109.2 111.9 115.2
  27.0  115.2 115.2 115.2 114.1 108.8 104.1 100.6  97.6  95.6  95.3  95.6  96.7  98.9 101.6 104.7 111.5
  35.0  115.0 112.7 108.6 102.5  97.4  93.7  91.2  87.6  85.9  85.5  85.9  87.3  89.2  92.1  95.2 101.9
  45.0  105.0 102.2  98.3  93.4  89.1  85.6  83.4  80.7  79.2  78.5  78.8  79.3  80.5  83.2  86.8  94.9
  55.0  97.6  92.7  88.8  84.4  81.3  79.3  77.7  75.5  74.0  73.5  73.5  74.7  76.8  79.5  83.1  92.2
  70.0  94.5  91.2  88.8  86.2  84.6  82.9  81.3  76.8  73.7  73.5  73.5  74.4  76.4  79.2  82.6  91.6
  90.0  92.1  91.7  91.0  89.1  85.8  83.7  83.6  81.9  79.1  78.2  78.6  80.7  84.0  87.8  92.6 100.0
  110.0  97.4  97.0  96.4  93.4  90.5  89.1  88.6  86.4  84.3  84.0  84.9  86.6  88.9  91.9  95.5 100.4
  140.0 100.7 100.5 100.2  95.9  94.7  94.3  94.1  91.5  90.6  90.6  92.0  93.1  94.3  96.0  97.9  99.9
  160.0 101.2 101.0 100.7  96.7  96.1  96.0  95.8  93.3  92.7  92.7  94.2  95.1  96.0  97.2  98.5  99.7
 
'''Notes''':
 
  We need an article about VANOS.


==== Vanos IN (warm) 1 ====
'''Ref''': [[DME_table_reference#Vanos_IN_(warm)_1|Vanos IN (warm) 1]]


'''Brief description''': GKF_ESPR_NORM_WARM_PF1
'''Brief description''': GKF_ESPR_NORM_WARM_PF1
Line 558: Line 547:
'''Base''':
'''Base''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000    98.500    96.900    95.200    94.400    94.200    93.200    92.600    92.500    91.800    92.900    92.600    92.200    97.000  100.800  101.700  110.900
  14.0  98.5  96.9  95.2  94.4  94.2  93.2  92.6  92.5  91.8  92.9  92.6  92.2  97.0  100.8  101.7  110.9
    18.000    90.500    86.500    81.200    80.600    79.800    78.100    77.100    79.700    83.000    84.000    84.000    85.500    91.600    96.200    97.200  106.600
  18.0  90.5  86.5  81.2  80.6  79.8  78.1  77.1  79.7  83.0  84.0  84.0  85.5  91.6  96.2  97.2  106.6
    22.000    82.100    77.400    70.300    69.700    68.600    67.500    66.700    70.200    75.400    76.300    76.000    78.200    85.500    90.900    91.800  101.400
  22.0  82.1  77.4  70.3  69.7  68.6  67.5  66.7  70.2  75.4  76.3  76.0  78.2  85.5  90.9  91.8  101.4
    27.000    74.200    69.500    62.700    62.000    60.900    60.500    59.700    62.900    68.600    69.000    68.300    70.500    79.000    84.700    85.400    95.200
  27.0  74.2  69.5  62.7  62.0  60.9  60.5  59.7  62.9  68.6  69.0  68.3  70.5  79.0  84.7  85.4  95.2
    35.000    69.200    65.300    59.600    57.400    56.500    55.900    55.100    57.900    63.000    63.500    62.900    65.000    75.000    80.200    81.600    90.500
  35.0  69.2  65.3  59.6  57.4  56.5  55.9  55.1  57.9  63.0  63.5  62.9  65.0  75.0  80.2  81.6  90.5
    45.000    67.400    65.100    61.500    59.800    59.000    58.100    58.000    58.400    60.900    61.500    60.800    62.100    73.000    77.600    80.500    88.900
  45.0  67.4  65.1  61.5  59.8  59.0  58.1  58.0  58.4  60.9  61.5  60.8  62.1  73.0  77.6  80.5  88.9
    55.000    70.500    69.500    67.800    65.000    64.200    63.700    63.700    62.600    64.900    63.700    62.900    64.700    73.600    77.900    82.300    91.300
  55.0  70.5  69.5  67.8  65.0  64.2  63.7  63.7  62.6  64.9  63.7  62.9  64.7  73.6  77.9  82.3  91.3
    70.000    79.500    78.800    77.800    75.900    76.300    74.400    76.300    74.700    74.600    71.900    70.400    72.600    77.800    82.500    88.500    98.900
  70.0  79.5  78.8  77.8  75.9  76.3  74.4  76.3  74.7  74.6  71.9  70.4  72.6  77.8  82.5  88.5  98.9
    90.000    94.100    93.100    92.400    90.300    87.300    85.100    85.100    83.400    80.700    79.700    80.000    82.100    85.600    89.500    94.400  101.900
  90.0  94.1  93.1  92.4  90.3  87.3  85.1  85.1  83.4  80.7  79.7  80.0  82.1  85.6  89.5  94.4  101.9
  110.000    98.700    98.300    97.700    94.700    91.900    90.400    90.100    87.900    85.800    85.400    86.200    88.000    90.400    93.500    97.100  102.200
  110.0  98.7  98.3  97.7  94.7  91.9  90.4  90.1  87.9  85.8  85.4  86.2  88.0  90.4  93.5  97.1  102.2
  140.000  102.600  102.400  102.000    97.800    96.400    96.000    95.800    93.200    92.200    92.200    93.600    94.800    96.000    97.900    99.800  101.900
  140.0  102.6  102.4  102.0  97.8  96.4  96.0  95.8  93.2  92.2  92.2  93.6  94.8  96.0  97.9  99.8  101.9
  160.000  103.200  103.000  102.700    98.600    97.900    97.800    97.600    95.000    94.300    94.400    95.900    96.800    97.800    99.100  100.400  101.700
  160.0  103.2  103.0  102.7  98.6  97.9  97.8  97.6  95.0  94.3  94.4  95.9  96.8  97.8  99.1  100.4  101.7


'''Difference''':
'''Difference''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000    -2.000    -1.900    -1.900    -1.900    -1.900    -1.900    -1.900    -1.900    -1.800    -1.900    -1.900    -1.800    -1.900    -2.000    -2.000    -2.200
  14.0  -2.0  -1.9  -1.9  -1.9  -1.9  -1.9  -1.9  -1.9  -1.8  -1.9  -1.9  -1.8  -1.9  -2.0  -2.0  -2.2
    18.000    -1.800    -1.700    -1.600    -1.600    -1.600    -1.600    -1.500    -1.600    -1.700    -1.700    -1.700    -1.700    -1.800    -1.900    -1.900    -2.100
  18.0  -1.8  -1.7  -1.6  -1.6  -1.6  -1.6  -1.5  -1.6  -1.7  -1.7  -1.7  -1.7  -1.8  -1.9  -1.9  -2.1
    22.000    -1.600    -1.500    -1.400    -1.400    -1.400    -1.300    -1.300    -1.400    -1.500    -1.500    -1.500    -1.600    -1.700    -1.800    -1.800    -2.000
  22.0  -1.6  -1.5  -1.4  -1.4  -1.4  -1.3  -1.3  -1.4  -1.5  -1.5  -1.5  -1.6  -1.7  -1.8  -1.8  -2.0
    27.000    -1.500    -1.400    -1.300    -1.200    -1.200    -1.200    -1.200    -1.300    -1.400    -1.400    -1.400    -1.400    -1.600    -1.700    -1.700    -1.900
  27.0  -1.5  -1.4  -1.3  -1.2  -1.2  -1.2  -1.2  -1.3  -1.4  -1.4  -1.4  -1.4  -1.6  -1.7  -1.7  -1.9
    35.000    -1.400    -1.300    -1.200    -1.100    -1.100    -1.100    -1.100    -1.200    -1.300    -1.300    -1.300    -1.300    -1.500    -1.600    -1.600    -1.800
  35.0  -1.4  -1.3  -1.2  -1.1  -1.1  -1.1  -1.1  -1.2  -1.3  -1.3  -1.3  -1.3  -1.5  -1.6  -1.6  -1.8
    45.000    -1.300    -1.300    -1.200    -1.200    -1.200    -1.200    -1.200    -1.200    -1.200    -1.200    -1.200    -1.200    -1.500    -1.600    -1.600    -1.800
  45.0  -1.3  -1.3  -1.2  -1.2  -1.2  -1.2  -1.2  -1.2  -1.2  -1.2  -1.2  -1.2  -1.5  -1.6  -1.6  -1.8
    55.000    -1.400    -1.400    -1.400    -1.300    -1.300    -1.300    -1.300    -1.300    -1.300    -1.300    -1.300    -1.300    -1.500    -1.600    -1.600    -1.800
  55.0  -1.4  -1.4  -1.4  -1.3  -1.3  -1.3  -1.3  -1.3  -1.3  -1.3  -1.3  -1.3  -1.5  -1.6  -1.6  -1.8
    70.000    -1.600    -1.600    -1.600    -1.500    -1.500    -1.500    -1.500    -1.500    -1.500    -1.400    -1.400    -1.500    -1.600    -1.600    -1.800    -2.000
  70.0  -1.6  -1.6  -1.6  -1.5  -1.5  -1.5  -1.5  -1.5  -1.5  -1.4  -1.4  -1.5  -1.6  -1.6  -1.8  -2.0
    90.000    -1.900    -1.900    -1.800    -1.800    -1.700    -1.700    -1.700    -1.700    -1.600    -1.600    -1.600    -1.600    -1.700    -1.800    -1.900    -2.000
  90.0  -1.9  -1.9  -1.8  -1.8  -1.7  -1.7  -1.7  -1.7  -1.6  -1.6  -1.6  -1.6  -1.7  -1.8  -1.9  -2.0
  110.000    -2.000    -2.000    -2.000    -1.900    -1.800    -1.800    -1.800    -1.800    -1.700    -1.700    -1.700    -1.800    -1.800    -1.900    -1.900    -2.000
  110.0  -2.0  -2.0  -2.0  -1.9  -1.8  -1.8  -1.8  -1.8  -1.7  -1.7  -1.7  -1.8  -1.8  -1.9  -1.9  -2.0
  140.000    -2.100    -2.000    -2.000    -2.000    -1.900    -1.900    -1.900    -1.900    -1.800    -1.800    -1.900    -1.900    -1.900    -2.000    -2.000    -2.000
  140.0  -2.1  -2.0  -2.0  -2.0  -1.9  -1.9  -1.9  -1.9  -1.8  -1.8  -1.9  -1.9  -1.9  -2.0  -2.0  -2.0
  160.000    -2.100    -2.100    -2.100    -2.000    -2.000    -2.000    -2.000    -1.900    -1.900    -1.900    -1.900    -1.900    -2.000    -2.000    -2.000    -2.000
  160.0  -2.1  -2.1  -2.1  -2.0  -2.0  -2.0  -2.0  -1.9  -1.9  -1.9  -1.9  -1.9  -2.0  -2.0  -2.0  -2.0


'''Modified''':
'''Modified''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000    96.500    95.000    93.300    92.500    92.300    91.300    90.700    90.600    90.000    91.000    90.700    90.400    95.100    98.800    99.700  108.700
  14.0  96.5  95.0  93.3  92.5  92.3  91.3  90.7  90.6  90.0  91.0  90.7  90.4  95.1  98.8  99.7  108.7
    18.000    88.700    84.800    79.600    79.000    78.200    76.500    75.600    78.100    81.300    82.300    82.300    83.800    89.800    94.300    95.300  104.500
  18.0  88.7  84.8  79.6  79.0  78.2  76.5  75.6  78.1  81.3  82.3  82.3  83.8  89.8  94.3  95.3  104.5
    22.000    80.500    75.900    68.900    68.300    67.200    66.200    65.400    68.800    73.900    74.800    74.500    76.600    83.800    89.100    90.000    99.400
  22.0  80.5  75.9  68.9  68.3  67.2  66.2  65.4  68.8  73.9  74.8  74.5  76.6  83.8  89.1  90.0  99.4
    27.000    72.700    68.100    61.400    60.800    59.700    59.300    58.500    61.600    67.200    67.600    66.900    69.100    77.400    83.000    83.700    93.300
  27.0  72.7  68.1  61.4  60.8  59.7  59.3  58.5  61.6  67.2  67.6  66.9  69.1  77.4  83.0  83.7  93.3
    35.000    67.800    64.000    58.400    56.300    55.400    54.800    54.000    56.700    61.700    62.200    61.600    63.700    73.500    78.600    80.000    88.700
  35.0  67.8  64.0  58.4  56.3  55.4  54.8  54.0  56.7  61.7  62.2  61.6  63.7  73.5  78.6  80.0  88.7
    45.000    66.100    63.800    60.300    58.600    57.800    56.900    56.800    57.200    59.700    60.300    59.600    60.900    71.500    76.000    78.900    87.100
  45.0  66.1  63.8  60.3  58.6  57.8  56.9  56.8  57.2  59.7  60.3  59.6  60.9  71.5  76.0  78.9  87.1
    55.000    69.100    68.100    66.400    63.700    62.900    62.400    62.400    61.300    63.600    62.400    61.600    63.400    72.100    76.300    80.700    89.500
  55.0  69.1  68.1  66.4  63.7  62.9  62.4  62.4  61.3  63.6  62.4  61.6  63.4  72.1  76.3  80.7  89.5
    70.000    77.900    77.200    76.200    74.400    74.800    72.900    74.800    73.200    73.100    70.500    69.000    71.100    76.200    80.900    86.700    96.900
  70.0  77.9  77.2  76.2  74.4  74.8  72.9  74.8  73.2  73.1  70.5  69.0  71.1  76.2  80.9  86.7  96.9
    90.000    92.200    91.200    90.600    88.500    85.600    83.400    83.400    81.700    79.100    78.100    78.400    80.500    83.900    87.700    92.500    99.900
  90.0  92.2  91.2  90.6  88.5  85.6  83.4  83.4  81.7  79.1  78.1  78.4  80.5  83.9  87.7  92.5  99.9
  110.000    96.700    96.300    95.700    92.800    90.100    88.600    88.300    86.100    84.100    83.700    84.500    86.200    88.600    91.600    95.200  100.200
  110.0  96.7  96.3  95.7  92.8  90.1  88.6  88.3  86.1  84.1  83.7  84.5  86.2  88.6  91.6  95.2  100.2
  140.000  100.500  100.400  100.000    95.800    94.500    94.100    93.900    91.300    90.400    90.400    91.700    92.900    94.100    95.900    97.800    99.900
  140.0  100.5  100.4  100.0  95.8  94.5  94.1  93.9  91.3  90.4  90.4  91.7  92.9  94.1  95.9  97.8  99.9
  160.000  101.100   100.900   100.600    96.600    95.900    95.800    95.600    93.100    92.400    92.500    94.000    94.900    95.800    97.100    98.400    99.700
  160.0  101.1  100.9  100.6   96.6  95.9  95.8  95.6  93.1  92.4  92.5  94.0  94.9  95.8  97.1  98.4  99.7


==== Vanos IN (cold) 2 ====
==== Vanos IN (warm) 2 ====


'''Brief description''': GKF_ESPR_NORM_KALT_PF2
'''Ref''': [[DME_table_reference#Vanos_IN_(warm)_2|Vanos IN (warm) 2]]
 
'''Brief description''': GKF_ESPR_NORM_WARM_PF2


'''Dimension''': 2D, table
'''Dimension''': 2D, table
Line 618: Line 609:
'''Base''':
'''Base''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500
  14.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
    18.000  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.500
  18.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
    22.000  117.500  117.500  117.500  117.500  117.500  117.500  117.500  117.400  114.800  113.600  113.400  114.200  115.400  117.200  117.500  117.500
  22.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.4  114.8  113.6  113.4  114.2  115.4  117.2  117.5  117.5
    27.000  117.500  117.500  117.500  117.500  117.500  116.800  112.300  106.200  103.200  102.200  102.500  103.700  105.900  108.700  111.800  117.500
  27.0  117.5  117.5  117.5  117.5  117.5  116.8  112.3  106.2  103.2  102.2  102.5  103.7  105.9  108.7  111.8  117.5
    35.000  117.500  117.500  117.500  114.800  107.600  102.400    99.000    94.800    92.700    92.200    92.700    94.100    96.000    99.000  102.100  109.000
  35.0  117.5  117.5  117.5  114.8  107.6  102.4  99.0  94.8  92.7  92.2  92.7  94.1  96.0  99.0  102.1  109.0
    45.000  117.500  117.500  111.700  101.500    95.100    91.500    88.800    86.400    84.600    84.400    84.600    85.500    87.200    89.900    93.600  101.800
  45.0  117.5  117.5  111.7  101.5  95.1  91.5  88.8  86.4  84.6  84.4  84.6  85.5  87.2  89.9  93.6  101.8
    55.000  116.600  111.200  103.200    95.200    89.500    85.400    82.500    80.000    79.000    78.700    79.100    80.600    83.000    85.900    89.400    99.100
  55.0  116.6  111.2  103.2  95.2  89.5  85.4  82.5  80.0  79.0  78.7  79.1  80.6  83.0  85.9  89.4  99.1
    70.000    98.900    95.000    92.000    88.700    85.600    83.400    81.600    79.200    78.200    78.000    78.400    79.700    81.900    84.900    88.400    98.500
  70.0  98.9  95.0  92.0  88.7  85.6  83.4  81.6  79.2  78.2  78.0  78.4  79.7  81.9  84.9  88.4  98.5
    90.000    94.000    93.600    92.900    90.900    87.600    85.400    85.300    83.600    80.700    79.800    80.200    82.300    85.700    89.600    94.500  102.000
  90.0  94.0  93.6  92.9  90.9  87.6  85.4  85.3  83.6  80.7  79.8  80.2  82.3  85.7  89.6  94.5  102.0
  110.000    99.400    99.000    98.400    95.300    92.300    90.900    90.400    88.200    86.000    85.700    86.600    88.400    90.700    93.800    97.400  102.400
  110.0  99.4  99.0  98.4  95.3  92.3  90.9  90.4  88.2  86.0  85.7  86.6  88.4  90.7  93.8  97.4  102.4
  140.000  102.800  102.600  102.200    97.900    96.600    96.200    96.000    93.400    92.400    92.400    93.900    95.000    96.200    98.000    99.900  101.900
  140.0  102.8  102.6  102.2  97.9  96.6  96.2  96.0  93.4  92.4  92.4  93.9  95.0  96.2  98.0  99.9  101.9
  160.000  103.300  103.100  102.800    98.700    98.100    98.000    97.800    95.200    94.600    94.600    96.100    97.000    98.000    99.200  100.500  101.700
  160.0  103.3  103.1  102.8  98.7  98.1  98.0  97.8  95.2  94.6  94.6  96.1  97.0  98.0  99.2  100.5  101.7


'''Difference''':
'''Difference''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600
  14.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6
    18.000    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600
  18.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6
    22.000    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.500    -4.500    -4.500    -4.500    -4.600    -4.600    -4.600    -4.600
  22.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.5  -4.5  -4.5  -4.5  -4.6  -4.6  -4.6  -4.6
    27.000    -4.600    -4.600    -4.600    -4.600    -4.600    -4.600    -4.400    -4.200    -4.100    -4.000    -4.000    -4.100    -4.200    -4.300    -4.400    -4.600
  27.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.4  -4.2  -4.1  -4.0  -4.0  -4.1  -4.2  -4.3  -4.4  -4.6
    35.000    -4.600    -4.600    -4.600    -4.500    -4.300    -4.000    -3.900    -3.800    -3.700    -3.600    -3.700    -3.700    -3.800    -3.900    -4.000    -4.300
  35.0  -4.6  -4.6  -4.6  -4.5  -4.3  -4.0  -3.9  -3.8  -3.7  -3.6  -3.7  -3.7  -3.8  -3.9  -4.0  -4.3
    45.000    -4.600    -4.600    -4.400    -4.000    -3.800    -3.600    -3.500    -3.400    -3.400    -3.400    -3.400    -3.400    -3.400    -3.600    -3.700    -4.000
  45.0  -4.6  -4.6  -4.4  -4.0  -3.8  -3.6  -3.5  -3.4  -3.4  -3.4  -3.4  -3.4  -3.4  -3.6  -3.7  -4.0
    55.000    -4.600    -4.400    -4.100    -3.800    -3.600    -3.400    -3.200    -3.200    -3.100    -3.100    -3.100    -3.200    -3.300    -3.400    -3.600    -3.900
  55.0  -4.6  -4.4  -4.1  -3.8  -3.6  -3.4  -3.2  -3.2  -3.1  -3.1  -3.1  -3.2  -3.3  -3.4  -3.6  -3.9
    70.000    -3.900    -3.800    -3.600    -3.500    -3.400    -3.300    -3.200    -3.200    -3.100    -3.100    -3.100    -3.200    -3.200    -3.400    -3.500    -3.900
  70.0  -3.9  -3.8  -3.6  -3.5  -3.4  -3.3  -3.2  -3.2  -3.1  -3.1  -3.1  -3.2  -3.2  -3.4  -3.5  -3.9
    90.000    -3.700    -3.700    -3.700    -3.600    -3.500    -3.400    -3.400    -3.300    -3.200    -3.200    -3.200    -3.200    -3.400    -3.600    -3.800    -4.000
  90.0  -3.7  -3.7  -3.7  -3.6  -3.5  -3.4  -3.4  -3.3  -3.2  -3.2  -3.2  -3.2  -3.4  -3.6  -3.8  -4.0
  110.000    -3.900    -3.900    -3.900    -3.800    -3.600    -3.600    -3.600    -3.500    -3.400    -3.400    -3.400    -3.500    -3.600    -3.700    -3.800    -4.000
  110.0  -3.9  -3.9  -3.9  -3.8  -3.6  -3.6  -3.6  -3.5  -3.4  -3.4  -3.4  -3.5  -3.6  -3.7  -3.8  -4.0
  140.000    -4.100    -4.100    -4.000    -3.900    -3.800    -3.800    -3.800    -3.700    -3.600    -3.600    -3.700    -3.800    -3.800    -3.900    -4.000    -4.000
  140.0  -4.1  -4.1  -4.0  -3.9  -3.8  -3.8  -3.8  -3.7  -3.6  -3.6  -3.7  -3.8  -3.8  -3.9  -4.0  -4.0
  160.000    -4.100    -4.100    -4.100    -3.900    -3.900    -3.900    -3.900    -3.800    -3.800    -3.800    -3.800    -3.800    -3.900    -3.900    -4.000    -4.000
  160.0  -4.1  -4.1  -4.1  -3.9  -3.9  -3.9  -3.9  -3.8  -3.8  -3.8  -3.8  -3.8  -3.9  -3.9  -4.0  -4.0


'''Modified''':
'''Modified''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900
  14.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
    18.000  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.900
  18.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
    22.000  112.900  112.900  112.900  112.900  112.900  112.900  112.900  112.800  110.300  109.100  108.900  109.700  110.800  112.600  112.900  112.900
  22.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.8  110.3  109.1  108.9  109.7  110.8  112.6  112.9  112.9
    27.000  112.900  112.900  112.900  112.900  112.900  112.200  107.900  102.000    99.100    98.200    98.500    99.600  101.700  104.400  107.400  112.900
  27.0  112.9  112.9  112.9  112.9  112.9  112.2  107.9  102.0  99.1  98.2  98.5  99.6  101.7  104.4  107.4  112.9
    35.000  112.900  112.900  112.900  110.300  103.300    98.400    95.100    91.000    89.000    88.600    89.000    90.400    92.200    95.100    98.100  104.700
  35.0  112.9  112.9  112.9  110.3  103.3  98.4  95.1  91.0  89.0  88.6  89.0  90.4  92.2  95.1  98.1  104.7
    45.000  112.900  112.900  107.300    97.500    91.300    87.900    85.300    83.000    81.200    81.000    81.200    82.100    83.800    86.300    89.900    97.800
  45.0  112.9  112.9  107.3  97.5  91.3  87.9  85.3  83.0  81.2  81.0  81.2  82.1  83.8  86.3  89.9  97.8
    55.000  112.000  106.800    99.100    91.400    85.900    82.000    79.300    76.800    75.900    75.600    76.000    77.400    79.700    82.500    85.800    95.200
  55.0  112.0  106.8  99.1  91.4  85.9  82.0  79.3  76.8  75.9  75.6  76.0  77.4  79.7  82.5  85.8  95.2
    70.000    95.000    91.200    88.400    85.200    82.200    80.100    78.400    76.000    75.100    74.900    75.300    76.500    78.700    81.500    84.900    94.600
  70.0  95.0  91.2  88.4  85.2  82.2  80.1  78.4  76.0  75.1  74.9  75.3  76.5  78.7  81.5  84.9  94.6
    90.000    90.300    89.900    89.200    87.300    84.100    82.000    81.900    80.300    77.500    76.600    77.000    79.100    82.300    86.000    90.700    98.000
  90.0  90.3  89.9  89.2  87.3  84.1  82.0  81.9  80.3  77.5  76.6  77.0  79.1  82.3  86.0  90.7  98.0
  110.000    95.500    95.100    94.500    91.500    88.700    87.300    86.800    84.700    82.600    82.300    83.200    84.900    87.100    90.100    93.600    98.400
  110.0  95.5  95.1  94.5  91.5  88.7  87.3  86.8  84.7  82.6  82.3  83.2  84.9  87.1  90.1  93.6  98.4
  140.000    98.700    98.500    98.200    94.000    92.800    92.400    92.200    89.700    88.800    88.800    90.200    91.200    92.400    94.100    95.900    97.900
  140.0  98.7  98.5  98.2  94.0  92.8  92.4  92.2  89.7  88.8  88.8  90.2  91.2  92.4  94.1  95.9  97.9
  160.000    99.200    99.000    98.700    94.800    94.200    94.100    93.900    91.400    90.800    90.800    92.300    93.200    94.100    95.300    96.500    97.700
  160.0  99.2  99.0  98.7  94.8  94.2  94.1  93.9  91.4  90.8  90.8  92.3  93.2  94.1  95.3  96.5  97.7
 


==== Vanos IN (cold) 1 ====
==== Vanos IN (cold) 1 ====
'''Ref''': [[DME_table_reference#Vanos_IN_(cold)_1|Vanos IN (cold) 1]]


'''Brief description''': GKF_ESPR_NORM_KALT_PF1
'''Brief description''': GKF_ESPR_NORM_KALT_PF1
Line 678: Line 672:
'''Base''':
'''Base''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000  110.400  111.800  114.700  117.300  115.400  113.400  113.200  113.300  115.400  115.300  116.900  117.300  118.500  119.500  119.600  122.200
  14.0  110.4  111.8  114.7  117.3  115.4  113.4  113.2  113.3  115.4  115.3  116.9  117.3  118.5  119.5  119.6  122.2
    18.000  110.200  110.400  110.900  108.800  104.100    98.800    97.400    97.900    98.300    99.100  101.500  104.400  107.500  109.600  109.600  119.000
  18.0  110.2  110.4  110.9  108.8  104.1  98.8  97.4  97.9  98.3  99.1  101.5  104.4  107.5  109.6  109.6  119.0
    22.000  108.600  107.300  104.900    99.700    92.800    85.800    84.200    83.800    83.900    85.600    88.700    93.100    97.000    99.300    99.200  109.400
  22.0  108.6  107.3  104.9  99.7  92.8  85.8  84.2  83.8  83.9  85.6  88.7  93.1  97.0  99.3  99.2  109.4
    27.000  105.600  102.600    97.300    90.400    82.700    74.900    73.400    72.600    72.600    75.400    78.600    83.300    87.900    90.300    90.300  100.200
  27.0  105.6  102.6  97.3  90.4  82.7  74.9  73.4  72.6  72.6  75.4  78.6  83.3  87.9  90.3  90.3  100.2
    35.000  100.800    96.900    89.200    82.300    74.600    66.700    65.900    65.100    65.100    68.000    71.100    75.700    80.600    83.700    84.600    94.000
  35.0  100.8  96.9  89.2  82.3  74.6  66.7  65.9  65.1  65.1  68.0  71.1  75.7  80.6  83.7  84.6  94.0
    45.000    94.400    90.400    82.600    76.300    69.800    62.400    62.000    60.900    61.000    63.200    65.700    69.700    75.600    78.900    81.400    90.100
  45.0  94.4  90.4  82.6  76.3  69.8  62.4  62.0  60.9  61.0  63.2  65.7  69.7  75.6  78.9  81.4  90.1
    55.000    88.300    85.600    80.300    75.000    69.700    64.600    63.000    61.000    61.600    62.800    64.900    68.700    73.600    77.500    82.100    91.000
  55.0  88.3  85.6  80.3  75.0  69.7  64.6  63.0  61.0  61.6  62.8  64.9  68.7  73.6  77.5  82.1  91.0
    70.000    82.200    81.700    80.600    78.000    75.300    72.700    71.300    70.200    69.500    69.600    70.100    73.700    78.500    83.300    88.700    99.500
  70.0  82.2  81.7  80.6  78.0  75.3  72.7  71.3  70.2  69.5  69.6  70.1  73.7  78.5  83.3  88.7  99.5
    90.000    94.100    93.200    92.500    90.400    87.200    85.000    84.800    83.100    80.400    79.600    80.000    82.200    85.600    89.500    94.400  101.900
  90.0  94.1  93.2  92.5  90.4  87.2  85.0  84.8  83.1  80.4  79.6  80.0  82.2  85.6  89.5  94.4  101.9
  110.000    98.700    98.300    97.700    94.700    91.900    90.400    90.100    87.900    85.800    85.400    86.200    88.000    90.400    93.500    97.100  102.200
  110.0  98.7  98.3  97.7  94.7  91.9  90.4  90.1  87.9  85.8  85.4  86.2  88.0  90.4  93.5  97.1  102.2
  140.000  102.600  102.400  102.000    97.800    96.400    96.000    95.800    93.200    92.200    92.200    93.600    94.800    96.000    97.900    99.800  101.900
  140.0  102.6  102.4  102.0  97.8  96.4  96.0  95.8  93.2  92.2  92.2  93.6  94.8  96.0  97.9  99.8  101.9
  160.000  103.200  103.000  102.700    98.600    97.900    97.800    97.600    95.000    94.300    94.400    95.900    96.800    97.800    99.100  100.400  101.700
  160.0  103.2  103.0  102.7  98.6  97.9  97.8  97.6  95.0  94.3  94.4  95.9  96.8  97.8  99.1  100.4  101.7


'''Difference''':
'''Difference''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000    -4.400    -4.400    -4.500    -4.600    -4.600    -4.500    -4.500    -4.500    -4.600    -4.600    -4.600    -4.600    -4.700    -4.700    -4.700    -4.800
  14.0  -4.4  -4.4  -4.5  -4.6  -4.6  -4.5  -4.5  -4.5  -4.6  -4.6  -4.6  -4.6  -4.7  -4.7  -4.7  -4.8
    18.000    -4.400    -4.400    -4.400    -4.300    -4.100    -3.900    -3.800    -3.900    -3.900    -3.900    -4.000    -4.100    -4.200    -4.300    -4.300    -4.700
  18.0  -4.4  -4.4  -4.4  -4.3  -4.1  -3.9  -3.8  -3.9  -3.9  -3.9  -4.0  -4.1  -4.2  -4.3  -4.3  -4.7
    22.000    -4.300    -4.200    -4.200    -4.000    -3.700    -3.400    -3.300    -3.300    -3.300    -3.400    -3.500    -3.700    -3.800    -3.900    -3.900    -4.300
  22.0  -4.3  -4.2  -4.2  -4.0  -3.7  -3.4  -3.3  -3.3  -3.3  -3.4  -3.5  -3.7  -3.8  -3.9  -3.9  -4.3
    27.000    -4.200    -4.100    -3.800    -3.600    -3.300    -3.000    -2.900    -2.900    -2.900    -3.000    -3.100    -3.300    -3.500    -3.600    -3.600    -4.000
  27.0  -4.2  -4.1  -3.8  -3.6  -3.3  -3.0  -2.9  -2.9  -2.9  -3.0  -3.1  -3.3  -3.5  -3.6  -3.6  -4.0
    35.000    -4.000    -3.800    -3.500    -3.200    -3.000    -2.600    -2.600    -2.600    -2.600    -2.700    -2.800    -3.000    -3.200    -3.300    -3.400    -3.700
  35.0  -4.0  -3.8  -3.5  -3.2  -3.0  -2.6  -2.6  -2.6  -2.6  -2.7  -2.8  -3.0  -3.2  -3.3  -3.4  -3.7
    45.000    -3.800    -3.600    -3.300    -3.000    -2.800    -2.400    -2.400    -2.400    -2.400    -2.500    -2.600    -2.800    -3.000    -3.100    -3.200    -3.600
  45.0  -3.8  -3.6  -3.3  -3.0  -2.8  -2.4  -2.4  -2.4  -2.4  -2.5  -2.6  -2.8  -3.0  -3.1  -3.2  -3.6
    55.000    -3.500    -3.400    -3.200    -3.000    -2.800    -2.600    -2.500    -2.400    -2.400    -2.500    -2.600    -2.700    -2.900    -3.000    -3.200    -3.600
  55.0  -3.5  -3.4  -3.2  -3.0  -2.8  -2.6  -2.5  -2.4  -2.4  -2.5  -2.6  -2.7  -2.9  -3.0  -3.2  -3.6
    70.000    -3.200    -3.200    -3.200    -3.100    -3.000    -2.900    -2.800    -2.800    -2.800    -2.800    -2.800    -2.900    -3.100    -3.300    -3.500    -3.900
  70.0  -3.2  -3.2  -3.2  -3.1  -3.0  -2.9  -2.8  -2.8  -2.8  -2.8  -2.8  -2.9  -3.1  -3.3  -3.5  -3.9
    90.000    -3.700    -3.700    -3.700    -3.600    -3.400    -3.400    -3.400    -3.300    -3.200    -3.200    -3.200    -3.200    -3.400    -3.600    -3.800    -4.000
  90.0  -3.7  -3.7  -3.7  -3.6  -3.4  -3.4  -3.4  -3.3  -3.2  -3.2  -3.2  -3.2  -3.4  -3.6  -3.8  -4.0
  110.000    -3.900    -3.900    -3.900    -3.800    -3.600    -3.600    -3.600    -3.500    -3.400    -3.400    -3.400    -3.500    -3.600    -3.700    -3.800    -4.000
  110.0  -3.9  -3.9  -3.9  -3.8  -3.6  -3.6  -3.6  -3.5  -3.4  -3.4  -3.4  -3.5  -3.6  -3.7  -3.8  -4.0
  140.000    -4.100    -4.000    -4.000    -3.900    -3.800    -3.800    -3.800    -3.700    -3.600    -3.600    -3.700    -3.800    -3.800    -3.900    -4.000    -4.000
  140.0  -4.1  -4.0  -4.0  -3.9  -3.8  -3.8  -3.8  -3.7  -3.6  -3.6  -3.7  -3.8  -3.8  -3.9  -4.0  -4.0
  160.000    -4.100    -4.100    -4.100    -3.900    -3.900    -3.900    -3.900    -3.800    -3.700    -3.800    -3.800    -3.800    -3.900    -3.900    -4.000    -4.000
  160.0  -4.1  -4.1  -4.1  -3.9  -3.9  -3.9  -3.9  -3.8  -3.7  -3.8  -3.8  -3.8  -3.9  -3.9  -4.0  -4.0


'''Modified''':
'''Modified''':


            600.000  800.000  1000.000  1250.000  1500.000  1750.000  2000.000  2500.000  3000.000  3500.000  4000.000  4500.000  5000.000  5500.000  6000.000  7000.000
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
    14.000  106.000  107.400  110.200  112.700  110.800  108.900  108.700  108.800  110.800  110.700  112.300  112.700  113.800  114.800  114.900  117.400
  14.0  106.0  107.4  110.2  112.7  110.8  108.9  108.7  108.8  110.8  110.7  112.3  112.7  113.8  114.8  114.9  117.4
    18.000  105.800  106.000  106.500  104.500  100.000    94.900    93.600    94.000    94.400    95.200    97.500  100.300  103.300  105.300  105.300  114.300
  18.0  105.8  106.0  106.5  104.5  100.0  94.9  93.6  94.0  94.4  95.2  97.5  100.3  103.3  105.3  105.3  114.3
    22.000  104.300  103.100  100.700    95.700    89.100    82.400    80.900    80.500    80.600    82.200    85.200    89.400    93.200    95.400    95.300  105.100
  22.0  104.3  103.1  100.7   95.7  89.1  82.4  80.9  80.5  80.6  82.2  85.2  89.4  93.2  95.4  95.3  105.1
    27.000  101.400    98.500    93.500    86.800    79.400    71.900    70.500    69.700    69.700    72.400    75.500    80.000    84.400    86.700    86.700    96.200
  27.0  101.4  98.5  93.5  86.8  79.4  71.9  70.5  69.7  69.7  72.4  75.5  80.0  84.4  86.7  86.7  96.2
    35.000    96.800    93.100    85.700    79.100    71.600    64.100    63.300    62.500    62.500    65.300    68.300    72.700    77.400    80.400    81.200    90.300
  35.0  96.8  93.1  85.7  79.1  71.6  64.1  63.3  62.5  62.5  65.3  68.3  72.7  77.4  80.4  81.2  90.3
    45.000    90.600    86.800    79.300    73.300    67.000    60.000    59.600    58.500    58.600    60.700    63.100    66.900    72.600    75.800    78.200    86.500
  45.0  90.6  86.8  79.3  73.3  67.0  60.0  59.6  58.5  58.6  60.7  63.1  66.9  72.6  75.8  78.2  86.5
    55.000    84.800    82.200    77.100    72.000    66.900    62.000    60.500    58.600    59.200    60.300    62.300    66.000    70.700    74.500    78.900    87.400
  55.0  84.8  82.2  77.1  72.0  66.9  62.0  60.5  58.6  59.2  60.3  62.3  66.0  70.7  74.5  78.9  87.4
    70.000    79.000    78.500    77.400    74.900    72.300    69.800    68.500    67.400    66.700    66.800    67.300    70.800    75.400    80.000    85.200    95.600
  70.0  79.0  78.5  77.4  74.9  72.3  69.8  68.5  67.4  66.7  66.8  67.3  70.8  75.4  80.0  85.2  95.6
    90.000    90.400    89.500    88.800    86.800    83.800    81.600    81.400    79.800    77.200    76.400    76.800    79.000    82.200    85.900    90.600    97.900
  90.0  90.4  89.5  88.8  86.8  83.8  81.6  81.4  79.8  77.2  76.4  76.8  79.0  82.2  85.9  90.6  97.9
  110.000    94.800    94.400    93.800    90.900    88.300    86.800    86.500    84.400    82.400    82.000    82.800    84.500    86.800    89.800    93.300    98.200
  110.0  94.8  94.4  93.8  90.9  88.3  86.8  86.5  84.4  82.4  82.0  82.8  84.5  86.8  89.8  93.3  98.2
  140.000    98.500    98.400    98.000    93.900    92.600    92.200    92.000    89.500    88.600    88.600    89.900    91.000    92.200    94.000    95.800    97.900
  140.0  98.5  98.4  98.0  93.9  92.6  92.2  92.0  89.5  88.6  88.6  89.9  91.0  92.2  94.0  95.8  97.9
  160.000    99.100    98.900    98.600    94.700    94.000    93.900    93.700    91.200    90.600    90.600    92.100    93.000    93.900    95.200    96.400    97.700
  160.0  99.1  98.9  98.6  94.7  94.0  93.9  93.7  91.2  90.6  90.6  92.1  93.0  93.9  95.2  96.4  97.7


==== 1F052F ====


'''Brief description''': Drive, safety function: Acceleration reduction
==== Vanos IN (cold) 2 ====


'''Dimension''': constant
'''Ref''': [[DME_table_reference#Vanos_IN_(cold)_2|Vanos IN (cold) 2]]
 
'''Brief description''': GKF_ESPR_NORM_KALT_PF2
 
'''Dimension''': 2D, table


'''Categories''': Toggles
'''Categories''': Vanos


'''Units''': n/a
'''Unit info''': 1/min, % --> °


'''Breakpoints''': Vanos IN (warm) 2 X (autogen) vs Vanos IN (warm) 2 Y (autogen)


'''Base''':
'''Base''':


    140.0 (0x8C in hex. Some stock software versions have 00)
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
  18.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
  22.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.4  114.8  113.6  113.4  114.2  115.4  117.2  117.5  117.5
  27.0  117.5  117.5  117.5  117.5  117.5  116.8  112.3  106.2  103.2  102.2  102.5  103.7  105.9  108.7  111.8  117.5
  35.0  117.5  117.5  117.5  114.8  107.6  102.4  99.0  94.8  92.7  92.2  92.7  94.1  96.0  99.0  102.1  109.0
  45.0  117.5  117.5  111.7  101.5  95.1  91.5  88.8  86.4  84.6  84.4  84.6  85.5  87.2  89.9  93.6  101.8
  55.0  116.6  111.2  103.2  95.2  89.5  85.4  82.5  80.0  79.0  78.7  79.1  80.6  83.0  85.9  89.4  99.1
  70.0  98.9  95.0  92.0  88.7  85.6  83.4  81.6  79.2  78.2  78.0  78.4  79.7  81.9  84.9  88.4  98.5
  90.0  94.0  93.6  92.9  90.9  87.6  85.4  85.3  83.6  80.7  79.8  80.2  82.3  85.7  89.6  94.5  102.0
  110.0  99.4  99.0  98.4  95.3  92.3  90.9  90.4  88.2  86.0  85.7  86.6  88.4  90.7  93.8  97.4  102.4
  140.0 102.8  102.6  102.2  97.9  96.6  96.2  96.0  93.4  92.4  92.4  93.9  95.0  96.2  98.0  99.9  101.9
  160.0  103.3  103.1  102.8  98.7  98.1  98.0  97.8  95.2  94.6  94.6  96.1  97.0  98.0  99.2  100.5  101.7
 
'''Difference''':
 
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6
  18.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6
  22.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.5  -4.5  -4.5  -4.5  -4.6  -4.6  -4.6  -4.6
  27.0  -4.6  -4.6  -4.6  -4.6  -4.6  -4.6  -4.4  -4.2  -4.1  -4.0  -4.0  -4.1  -4.2  -4.3  -4.4  -4.6
  35.0  -4.6  -4.6  -4.6  -4.5  -4.3  -4.0  -3.9  -3.8  -3.7  -3.6  -3.7  -3.7  -3.8  -3.9  -4.0  -4.3
  45.0  -4.6  -4.6  -4.4  -4.0  -3.8  -3.6  -3.5  -3.4  -3.4  -3.4  -3.4  -3.4  -3.4  -3.6  -3.7  -4.0
  55.0  -4.6  -4.4  -4.1  -3.8  -3.6  -3.4  -3.2  -3.2  -3.1  -3.1  -3.1  -3.2  -3.3  -3.4  -3.6  -3.9
  70.0  -3.9  -3.8  -3.6  -3.5  -3.4  -3.3  -3.2  -3.2  -3.1  -3.1  -3.1  -3.2  -3.2  -3.4  -3.5  -3.9
  90.0  -3.7  -3.7  -3.7  -3.6  -3.5  -3.4  -3.4  -3.3  -3.2  -3.2  -3.2  -3.2  -3.4  -3.6  -3.8  -4.0
  110.0  -3.9  -3.9  -3.9  -3.8  -3.6  -3.6  -3.6  -3.5  -3.4  -3.4  -3.4  -3.5  -3.6  -3.7  -3.8  -4.0
  140.0  -4.1  -4.1  -4.0  -3.9  -3.8  -3.8  -3.8  -3.7  -3.6  -3.6  -3.7  -3.8  -3.8  -3.9  -4.0  -4.0
  160.0  -4.1  -4.1  -4.1  -3.9  -3.9  -3.9  -3.9  -3.8  -3.8  -3.8  -3.8  -3.8  -3.9  -3.9  -4.0  -4.0


'''Modified''':
'''Modified''':


      2.0
        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
  18.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
  22.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.8  110.3  109.1  108.9  109.7  110.8  112.6  112.9  112.9
  27.0  112.9  112.9  112.9  112.9  112.9  112.2  107.9  102.0  99.1  98.2  98.5  99.6  101.7  104.4  107.4  112.9
  35.0  112.9  112.9  112.9  110.3  103.3  98.4  95.1  91.0  89.0  88.6  89.0  90.4  92.2  95.1  98.1  104.7
  45.0  112.9  112.9  107.3  97.5  91.3  87.9  85.3  83.0  81.2  81.0  81.2  82.1  83.8  86.3  89.9  97.8
  55.0  112.0  106.8  99.1  91.4  85.9  82.0  79.3  76.8  75.9  75.6  76.0  77.4  79.7  82.5  85.8  95.2
  70.0  95.0  91.2  88.4  85.2  82.2  80.1  78.4  76.0  75.1  74.9  75.3  76.5  78.7  81.5  84.9  94.6
  90.0  90.3  89.9  89.2  87.3  84.1  82.0  81.9  80.3  77.5  76.6  77.0  79.1  82.3  86.0  90.7  98.0
  110.0  95.5  95.1  94.5  91.5  88.7  87.3  86.8  84.7  82.6  82.3  83.2  84.9  87.1  90.1  93.6  98.4
  140.0  98.7  98.5  98.2  94.0  92.8  92.4  92.2  89.7  88.8  88.8  90.2  91.2   92.4  94.1  95.9  97.9
  160.0   99.2  99.0  98.7  94.8  94.2  94.1  93.9  91.4  90.8  90.8  92.3  93.2  94.1  95.3  96.5  97.7


'''Notes''':


  Set to 2. Stock maps for some software versions have this set to zero. 1F052F is an error code that gets raised if the car accelerates 'too hard'. This can cause the car to shut down. Apparently, the feature operates to stop bad things like people flooring the accelerator accidentally when in traffic because their foot slips. A problem arises because the feature can be triggered wrongly because of wheel speed sensor problems or because tuned cars accelerate harder. If your car shuts down mid-pull (!!) you might want to revisit this.
==== Min. speed for burble (SOT) ====


==== 1F2802 ====
'''Ref''': [[DME_table_reference#Min._speed_for_burble_(SOT)|Min. speed for burble (SOT)]]


'''Brief description''': Set to 02 to disable
'''Brief description''': K_V_SOT_MN


'''Dimension''': constant
'''Dimension''': constant


'''Categories''': Toggles
'''Categories''': Exhaust


'''Units''': n/a
'''Units''': -




'''Base''':
'''Base''':


        0
    2.000
 
'''Difference''':
 
  653.300


'''Modified''':
'''Modified''':


      255
  655.300


'''Notes''':
'''Notes''':


   This is apparently some kind of DME self check. Custom tunes should set to 2 (possibly higher values will also deactivate).
   Although described as a minimum driving speed, this appears to be a flag. 655.3 is the maximum allowable value. The stock value of 2 seems to work fine in tunes also so custom tunes can probably ignore this.


==== 1F2801 ====
==== Burble duration (base) ====


'''Brief description''': Set to 02 to disable
'''Ref''': [[DME_table_reference#Burble_duration_(base)|Burble duration (base)]]


'''Dimension''': constant
'''Brief Description''': KL_TD_SOUND_MX


'''Categories''': Toggles
'''Dimension''': 1D, vector


'''Units''': -
'''Categories''': Exhaust
 
'''Unit info''': km/h --> s
 
'''Breakpoints''': Burble duration (base) X (autogen)




'''Base''':
'''Base''':


        0
    5.000    7.000  90.000  110.000
    4.000    1.000    1.000    0.500


'''Difference''':
'''Difference''':


      255
    5.000    7.000  90.000  110.000
    0.000    0.000  -0.500  -0.500


'''Modified''':
'''Modified''':


      255
    5.000    7.000  90.000  110.000
    4.000    1.000    0.500    0.000
 
==== Burble duration sport ====
 
'''Ref''': [[DME_table_reference#Burble_duration_sport|Burble duration sport]]


==== 180001 ====
'''Brief Description''': KL_TD_SOUND_MX_SPORT


'''Brief description''': Set to 02 to disable
'''Dimension''': 1D, vector


'''Dimension''': constant
'''Categories''': Exhaust


'''Categories''': Toggles
'''Unit info''': km/h --> s


'''Units''': -
'''Breakpoints''': Burble duration sport X (autogen)




'''Base''':
'''Base''':


        0
    5.000    7.000  90.000  110.000
    0.800    0.800    0.800    0.800


'''Difference''':
'''Difference''':


        2
    5.000    7.000  90.000  110.000
    3.200    1.200    1.200    1.200


'''Modified''':
'''Modified''':


        2
    5.000    7.000  90.000  110.000
    4.000    2.000    2.000    2.000


==== Min. speed for burble (SOT) ====
'''Notes''':


'''Brief description''': K_V_SOT_MN
  The 2 second values here are pretty aggressive. 1.5 seconds are considered by many as ''tasteful burbles''. The German for burbles is Schub-blub-bern -- a word which everybody should use when talking this.


'''Dimension''': constant


'''Categories''': Exhaust
==== Faktor fuer Schubblubbern im Stand ====
 
'''Ref''': [[DME_table_reference#Faktor_fuer_Schubblubbern_im_Stand|Faktor fuer Schubblubbern im Stand]]
 
'''Brief description''': K_F_SOT_RUECKBLICK_STAND
 
'''Dimension''': constant
 
'''Categories''': Exhaust


'''Units''': -
'''Units''': -
Line 829: Line 891:
'''Base''':
'''Base''':


     2.000
     0.000


'''Difference''':
'''Difference''':


  653.300
    0.996


'''Modified''':
'''Modified''':


  655.300
    0.996


==== Hysterese für das schließen der Abgasklappe0 ====
'''Notes''':


'''Brief description''': BMWgpfheat_tq_ResExhFlpClsdHys_C
  This is the burble factor when the car is stationary.


'''Dimension''': constant
==== Basic catalyst heating mode wish ====


'''Categories''': Exhaust
'''Ref''': [[DME_table_reference#Basic_catalyst_heating_mode_wish|Basic catalyst heating mode wish]]


'''Units''': Nm
'''Brief description''': BMWchas_st_OpmBasc_M


'''Dimension''': 2D, table


'''Base''':
'''Categories''': Exhaust


    5.000
'''Unit info''': s, °C --> -


'''Difference''':
'''Breakpoints''': Basic catalyst heating mode wish X (autogen) vs Basic catalyst heating mode wish Y (autogen)


  -5.000
'''Base''':


'''Modified''':
            10.000  20.000  25.000  30.000  38.000  40.000  60.000  62.000
 
  -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
     0.000
  -9.800    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
     9.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  18.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  35.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  45.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  45.600    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  80.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000


'''Difference''':


==== Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0 ====
            10.000  20.000  25.000  35.000  50.000  55.000  75.000  80.000
  -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
    9.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  18.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  35.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  45.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  45.600    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  80.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000


'''Brief Description''': BMWgpfheat_tq_ResExhFlpClsd_T
'''Modified''':


'''Dimension''': 1D, vector
            10.000  20.000  25.000  35.000  50.000  55.000  75.000  80.000
  -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
    9.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  18.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  35.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  45.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  45.600    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  80.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000


'''Categories''': Exhaust
'''Notes''':


'''Unit info''': 1/min --> Nm
  Small and probably ignorable changes here.


'''Breakpoints''': Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0 X (autogen)
==== Codeword sound ====
 
'''Ref''': [[DME_table_reference#Codeword_sound|Codeword sound]]
 
'''Brief description''': CW_SOUND
 
'''Dimension''': constant


'''Categories''': Exhaust
'''Units''': -


'''Base''':
'''Base''':


    0  500  1000  3500  3501  5000  6000  7000
     9.000
     30    30    30    30  1000  1000  1000  1000


'''Difference''':
'''Difference''':


   600  1300  2900  3000  4000  5000  6000  7000
   32.000
  -30  -30  -30  970    0    0    0    0


'''Modified''':
'''Modified''':


   600  1300  2900  3000  4000  5000  6000  7000
   41.000
    0    0    0  1000  1000  1000  1000  1000
 
'''Notes''':
 
  A flag controlling the behaviour of the ECU's burble support. The FRM needed to decode the possible values.
 
==== Tming min. burble (main) ====


==== Burble duration sport ====
'''Ref''': [[DME_table_reference#Tming_min._burble_(main)|Tming min. burble (main)]]


'''Brief Description''': KL_TD_SOUND_MX_SPORT
'''Brief description''': KF_ZWMIN_WSOT


'''Dimension''': 1D, vector
'''Dimension''': 2D, table


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': km/h --> s
'''Unit info''': 1/min, % --> °
 
'''Breakpoints''': Burble duration sport X (autogen)


'''Breakpoints''': Tming min. burble (main) X (autogen) vs Tming min. burble (main) Y (autogen)


'''Base''':
'''Base''':


    5.000   7.000   90.000 110.000
          320    640  1216  1600  2400  4000  5600  6528
    0.800    0.800    0.800    0.800
  11.8  -20.5  -23.5  -23.0  -17.0  -11.5  -8.5  -9.0  -7.5
  19.4  -23.0  -26.5  -28.5  -22.0  -16.0  -12.5  -14.0  -12.5
  33.7  -29.5  -34.5  -36.5  -28.5  -21.0  -18.0  -19.0  -18.0
  65.7  -34.0  -38.5  -40.0  -33.0  -27.0  -23.5  -24.5 -23.5
   96.9  -35.5  -39.0  -40.0  -35.0  -29.0  -26.5  -26.5  -26.0
  151.7 -29.0  -31.0  -32.5  -31.5  -27.0  -24.0  -25.0  -23.5
   160.0 -27.5  -30.0  -31.5  -30.5  -26.5  -24.0  -24.5  -23.5
  170.0 -26.5  -28.0  -30.0 -30.0 -26.5  -23.5  -24.0 -23.0


'''Difference''':
'''Difference''':


    5.000   7.000   90.000  110.000
          320    640  1216  1600  2400  4000  5600  6528
    3.200   1.200   1.200   1.200
  11.8    7.5  11.0  11.0    9.5    2.5  -1.5  -0.5    4.0
  19.4    4.5    8.5  10.5    8.5    2.0  -2.5  -1.5    5.0
  33.7    4.5  10.0  11.0  10.0    3.0    0.0    0.5    7.5
  65.7    9.0  14.0  14.5  14.5   9.0    5.5    6.0  13.0
  96.9    9.5  13.5  18.5  18.0  17.0  19.0  25.0  28.0
  151.7    5.0   7.5  15.0  19.5  16.5  16.5   22.0  25.5
  160.0    6.5    9.5  15.0  17.5  15.0  13.5  19.5  20.5
  170.0    3.5   5.5   8.5  13.0  10.0   9.5  14.5  15.5


'''Modified''':
'''Modified''':


    5.000    7.000   90.000 110.000
          320    640  1216  1600  2400  4000  5600  6528
    4.000   2.000   2.000   2.000
  11.8  -13.0  -12.5 -12.0  -7.5   -9.0 -10.0  -9.5  -3.5
  19.4 -18.5  -18.0  -18.0  -13.5  -14.0  -15.0  -15.5  -7.5
   33.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  65.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  96.9  -26.0  -25.5  -21.5  -17.0  -12.0  -7.5  -1.5   2.0
  151.7  -24.0  -23.5  -17.5  -12.0  -10.5  -7.5  -3.0   2.0
  160.0  -21.0  -20.5  -16.5  -13.0  -11.5  -10.5  -5.0  -3.0
  170.0  -23.0  -22.5  -21.5  -17.0  -16.5  -14.0  -9.5  -7.5


==== Burble duration (base) ====
'''Notes''':


'''Brief Description''': KL_TD_SOUND_MX
  Tentative understanding to date: the traditional method of burble tuning involves a two step process
# editing timing tables so as to retard timing at low load and high RPM. This ensures the spark occurs so late that not all fuel will ignite before the exhaust is open.
# editing the fuel table for the same load/rpm range to inject more fuel than is normally required on overrun (i.e. more than zero). The effect is thus to shove unburnt fuel down the exhaust which then ignites in the exhuast.
The B58 has built in burble support and does things differently. Instead, you specify the min timing values for which the ECU should enable burbles. The effect in either case is to choose a range of load and RPM over which you want burbles. In line with step 1 above, there are then timing ''offset'' tables which tell the ECU how much to modify the timing during burbles.


'''Dimension''': 1D, vector
  Questions to answer:
# The stock main burble table has timings well into the -20s which are never obtained in practice. This suggests some other table is also being used.
 
==== Tming min. burble (cold) ====
 
'''Ref''': [[DME_table_reference#Tming_min._burble_(cold)|Tming min. burble (cold)]]
 
'''Brief description''': KF_ZWMIN_KSOT
 
'''Dimension''': 2D, table


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': km/h --> s
'''Unit info''': 1/min, % --> °
 
'''Breakpoints''': Burble duration (base) X (autogen)


'''Breakpoints''': Tming min. burble (cold) X (autogen) vs Tming min. burble (cold) Y (autogen)


'''Base''':
'''Base''':


    5.000    7.000   90.000  110.000
          320    640  1216  1600  2400  4000  5600  6528
    4.000   1.000   1.000   0.500
  11.8  -20.5  -23.5 -23.0  -17.0  -11.5  -8.5   -9.0  -7.5
  19.4 -23.0  -26.5  -28.5  -22.0  -16.0  -12.5  -14.0  -12.5
   33.7  -29.5  -34.5  -36.5  -28.5  -21.0  -18.0  -19.0  -18.0
   65.7  -34.0  -38.5  -40.0  -33.0  -27.0  -23.5  -24.5  -23.5
   96.9  -35.5  -39.0  -40.0  -35.0  -29.0  -26.5  -26.5  -26.0
  151.7  -29.0  -31.0  -32.5  -31.5  -27.0  -24.0  -25.0  -23.5
  160.0  -27.5  -30.0  -31.5  -30.5  -26.5  -24.0  -24.5  -23.5
  170.0  -26.5  -28.0 -30.0  -30.0  -26.5  -23.5  -24.0  -23.0


'''Difference''':
'''Difference''':


    5.000   7.000   90.000  110.000
          320    640  1216  1600  2400  4000  5600  6528
    0.000   0.000   -0.500   -0.500
  11.8    7.5  11.0  11.0    9.5    2.5  -1.5  -0.5    4.0
  19.4    4.5    8.5  10.5    8.5    2.0  -2.5  -1.5    5.0
  33.7    4.5  10.0  11.0  10.0    3.0    0.0    0.5    7.5
  65.7    9.0  14.0  14.5  14.5    9.0    5.5    6.0  13.0
  96.9    9.5  13.5  18.5  18.0  17.0  19.0  25.0  28.0
  151.7    5.0   7.5  15.0  19.5  16.5   16.5  22.0  25.5
  160.0   6.5   9.5  15.0  17.5  15.0   13.5  19.5  20.5
   170.0   3.5    5.5    8.5  13.0   10.0   9.5  14.5  15.5


'''Modified''':
'''Modified''':


    5.000    7.000   90.000 110.000
          320    640  1216  1600  2400  4000  5600  6528
    4.000   1.000   0.500   0.000
  11.8  -13.0  -12.5 -12.0  -7.5   -9.0 -10.0  -9.5  -3.5
  19.4 -18.5  -18.0  -18.0  -13.5  -14.0  -15.0  -15.5  -7.5
  33.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
   65.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  96.9  -26.0  -25.5  -21.5  -17.0  -12.0  -7.5  -1.5   2.0
  151.7  -24.0  -23.5  -17.5  -12.0  -10.5  -7.5  -3.0   2.0
  160.0 -21.0  -20.5  -16.5  -13.0  -11.5  -10.5  -5.0  -3.0
  170.0  -23.0  -22.5  -21.5  -17.0  -16.5  -14.0  -9.5  -7.5
 
==== Timing offset burble (base) ====


==== maximale Geschwindigkeit bis zu der die Abgasklappe geschlossen bleiben soll. ====
'''Ref''': [[DME_table_reference#Timing_offset_burble_(base)|Timing offset burble (base)]]


'''Brief description''': BMWchas_v_MaxExhFlpClsd_C
'''Brief description''': KF_DZWMIN_NORMAL_SOT


'''Dimension''': constant
'''Dimension''': 2D, table


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Units''': km/h
'''Unit info''': 1/min, km/h --> °


'''Breakpoints''': Timing offset burble (base) X (autogen) vs Timing offset burble (base) Y (autogen)


'''Base''':
'''Base''':


      20
        1500  2200  2900  3600  4300  5000
    0  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
    10  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
    90  -4.5  -4.5  -4.5  -4.5  -5.5  -4.5
  110  -6.0  -6.0  -6.0  -6.0  -7.5  -6.0


'''Difference''':
'''Difference''':


      -20
        1500  2200  2900  3600  4300  5000
    0  3.5  3.5  3.5  3.5  4.0  3.5
    10  3.5  3.5  3.5  3.5  4.0  3.5
    90  4.5  4.5  4.5  4.5  5.5  4.5
  110  6.0  6.0  6.0  6.0  7.5  6.0


'''Modified''':
'''Modified''':


         0
         1500  2200  2900  3600  4300  5000
    0  0.0  0.0  0.0  0.0  0.0  0.0
    10  0.0  0.0  0.0  0.0  0.0  0.0
    90  0.0  0.0  0.0  0.0  0.0  0.0
  110  0.0  0.0  0.0  0.0  0.0  0.0


==== Hysterese für das schließen der Abgasklappe ====


'''Brief description''': BMWchas_tq_ResExhFlpClsdHys_C
==== Timing offset burble (sport) ====
 
'''Ref''': [[DME_table_reference#Timing_offset_burble_(sport)|Timing offset burble (sport)]]
 
'''Brief description''': KF_DZWMIN_SPORT_SOT


'''Dimension''': constant
'''Dimension''': 2D, table


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Units''': Nm
'''Unit info''': 1/min, km/h --> °


'''Breakpoints''': Timing offset burble (sport) X (autogen) vs Timing offset burble (sport) Y (autogen)


'''Base''':
'''Base''':


         5
         1500  2200  2900  3600  5000  6000
    0  -3.5 -3.5  -3.5  -3.5  -4.0  -3.5
    10  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
    50  -4.5  -4.5  -4.5  -4.5  -5.5  -4.5
  110  -6.0  -6.0  -6.0  -6.0  -7.5  -6.0


'''Difference''':
'''Difference''':


      -5
        1500  2200  2900  3600  5000  6000
    0  3.5  3.5  3.5  3.5  4.0  3.5
    10  1.5  1.5  1.5  1.5  2.0  1.5
    50  -0.5  -0.5  -0.5  -0.5  1.5  0.5
  110  1.0  1.0  1.0  1.0  2.5   1.0


'''Modified''':
'''Modified''':


         0
         1500  2200  2900  3600  5000  6000
    0   0.0  0.0  0.0  0.0  0.0  0.0
    10  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0
    50  -5.0  -5.0  -5.0  -5.0  -4.0  -4.0
  110  -5.0  -5.0  -5.0  -5.0  -5.0  -5.0
 
 
==== Hysterese für das schließen der Abgasklappe0 ====


==== Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll. ====
'''Ref''': [[DME_table_reference#Hysterese_für_das_schließen_der_Abgasklappe0|Hysterese für das schließen der Abgasklappe0]]


'''Brief Description''': BMWchas_tq_ResExhFlpClsd_T
'''Brief description''': BMWgpfheat_tq_ResExhFlpClsdHys_C


'''Dimension''': 1D, vector
'''Dimension''': constant


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': 1/min --> Nm
'''Units''': Nm
 
'''Breakpoints''': Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll. X (autogen)




'''Base''':
'''Base''':


    0  500  1000  3500  3501  5000  6000  7000
     5.000
     30    30    30    30  1000  1000  1000  1000


'''Difference''':
'''Difference''':


  600  1300  2900  3000  4000  5000  6000  7000
   -5.000
   -30  -30  -30  970    0    0    0    0


'''Modified''':
'''Modified''':


   600  1300  2900  3000  4000  5000  6000  7000
    0.000
    0    0    0 1000  1000  1000  1000  1000
 
'''Notes''':
 
   This is a hysteresis setting for the exhaust flap to prevent it opening and closing too readily. The MPPSK removes it.
 
==== Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0 ====


==== Faktor fuer Schubblubbern im Stand ====
'''Ref''': [[DME_table_reference#Momentenreserve,_ab_er_die_Abgasklappe_aus_akustischen_Gründen_geschlossen_werden_soll.0|Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0]]


'''Brief description''': K_F_SOT_RUECKBLICK_STAND
'''Brief Description''': BMWgpfheat_tq_ResExhFlpClsd_T


'''Dimension''': constant
'''Dimension''': 1D, vector


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Units''': -
'''Unit info''': 1/min --> Nm
 
'''Breakpoints''': Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0 X (autogen)




'''Base''':
'''Base''':


     0.000
    0  500  1000  3500  3501  5000  6000  7000
     30    30    30    30  1000  1000  1000  1000


'''Difference''':
'''Difference''':


     0.996
  600  1300  2900  3000  4000  5000  6000  7000
  -30  -30  -30  970    0    0    0     0


'''Modified''':
'''Modified''':


     0.996
  600  1300  2900  3000  4000  5000  6000  7000
    0    0     0 1000  1000  1000  1000  1000


==== Basic catalyst heating mode wish ====


'''Brief description''': BMWchas_st_OpmBasc_M
==== maximale Geschwindigkeit bis zu der die Abgasklappe geschlossen bleiben soll. ====
 
'''Ref''': [[DME_table_reference#maximale_Geschwindigkeit_bis_zu_der_die_Abgasklappe_geschlossen_bleiben_soll.|maximale Geschwindigkeit bis zu der die Abgasklappe geschlossen bleiben soll.]]
 
'''Brief description''': BMWchas_v_MaxExhFlpClsd_C


'''Dimension''': 2D, table
'''Dimension''': constant


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': s, °C --> -
'''Units''': km/h


'''Breakpoints''': Basic catalyst heating mode wish X (autogen) vs Basic catalyst heating mode wish Y (autogen)


'''Base''':
'''Base''':


            10.000  20.000  25.000  30.000  38.000  40.000  60.000  62.000
      20
  -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
    9.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  18.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  35.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  45.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  45.600    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  80.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000


'''Difference''':
'''Difference''':


            10.000  20.000  25.000  35.000  50.000  55.000  75.000  80.000
      -20
  -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
    9.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  18.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  35.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  45.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  45.600    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000
  80.000    0.000    0.000    0.000  -1.000    0.000    1.000    1.000    0.000


'''Modified''':
'''Modified''':


            10.000  20.000  25.000  35.000  50.000  55.000  75.000  80.000
        0
  -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
 
  -9.800    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
==== Hysterese für das schließen der Abgasklappe ====
    9.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  18.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  35.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  45.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  45.600    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  80.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000


==== Codeword sound ====
'''Ref''': [[DME_table_reference#Hysterese_für_das_schließen_der_Abgasklappe|Hysterese für das schließen der Abgasklappe]]


'''Brief description''': CW_SOUND
'''Brief description''': BMWchas_tq_ResExhFlpClsdHys_C


'''Dimension''': constant
'''Dimension''': constant
Line 1,100: Line 1,270:
'''Categories''': Exhaust
'''Categories''': Exhaust


'''Units''': -
'''Units''': Nm




'''Base''':
'''Base''':


    9.000
        5


'''Difference''':
'''Difference''':


  32.000
      -5


'''Modified''':
'''Modified''':


  41.000
        0
 
==== Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll. ====


==== Tming min. burble (main) ====
'''Ref''': [[DME_table_reference#Momentenreserve,_ab_er_die_Abgasklappe_aus_akustischen_Gründen_geschlossen_werden_soll.|Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.]]


'''Brief description''': KF_ZWMIN_WSOT
'''Brief Description''': BMWchas_tq_ResExhFlpClsd_T


'''Dimension''': 2D, table
'''Dimension''': 1D, vector


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': 1/min, % --> °
'''Unit info''': 1/min --> Nm
 
'''Breakpoints''': Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll. X (autogen)


'''Breakpoints''': Tming min. burble (main) X (autogen) vs Tming min. burble (main) Y (autogen)


'''Base''':
'''Base''':


            320    640  1216  1600  2400  4000  5600  6528
    0  500 1000 3500 3501 5000 6000 7000
  11.8  -20.5  -23.5  -23.0  -17.0  -11.5  -8.5  -9.0  -7.5
    30   30   30   30  1000 1000 1000 1000
  19.4  -23.0 -26.5 -28.5 -22.0 -16.0 -12.5 -14.0  -12.5
   33.7  -29.5  -34.5  -36.5  -28.5  -21.0  -18.0  -19.0  -18.0
   65.7  -34.0  -38.5  -40.0  -33.0  -27.0  -23.5  -24.5  -23.5
   96.9  -35.5  -39.0  -40.0  -35.0  -29.0  -26.5  -26.5  -26.0
  151.7  -29.0  -31.0  -32.5  -31.5  -27.0  -24.0  -25.0  -23.5
  160.0  -27.5  -30.0  -31.5  -30.5 -26.5 -24.0 -24.5 -23.5
  170.0  -26.5  -28.0  -30.0  -30.0  -26.5  -23.5  -24.0  -23.0


'''Difference''':
'''Difference''':


            320   640  1216  1600  2400  4000   5600  6528
   600  1300  2900  3000  4000 5000  6000  7000
   11.8    7.5  11.0  11.0    9.5    2.5  -1.5  -0.5    4.0
   -30   -30   -30   970    0     0     0     0
  19.4    4.5    8.5  10.5    8.5    2.0   -2.5   -1.5    5.0
  33.7    4.5  10.0  11.0  10.0    3.0    0.0    0.5    7.5
  65.7    9.0  14.0  14.5  14.5    9.0    5.5    6.0  13.0
  96.9    9.5  13.5  18.5  18.0  17.0  19.0   25.0   28.0
  151.7    5.0   7.5  15.0   19.5  16.5  16.5  22.0   25.5
  160.0    6.5    9.5  15.0  17.5  15.0  13.5  19.5  20.5
  170.0    3.5    5.5    8.5  13.0  10.0    9.5  14.5  15.5


'''Modified''':
'''Modified''':


            320   640  1216  1600  2400  4000  5600  6528
   600 1300 2900 3000 4000 5000 6000 7000
  11.8 -13.0 -12.5 -12.0  -7.5  -9.0 -10.0  -9.5  -3.5
    0     0     0  1000 1000 1000 1000 1000
  19.4 -18.5 -18.0 -18.0  -13.5  -14.0  -15.0  -15.5  -7.5
  33.7  -25.0 -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  65.7  -25.0  -24.5  -25.5  -18.5  -18.0 -18.0  -18.5 -10.5
  96.9 -26.0 -25.5 -21.5  -17.0  -12.0  -7.5  -1.5    2.0
  151.7  -24.0  -23.5  -17.5  -12.0  -10.5  -7.5  -3.0    2.0
  160.0  -21.0  -20.5  -16.5  -13.0  -11.5  -10.5  -5.0  -3.0
  170.0  -23.0  -22.5  -21.5  -17.0  -16.5  -14.0  -9.5  -7.5


==== Tming min. burble (cold) ====


'''Brief description''': KF_ZWMIN_KSOT
==== Exhaust flap open at warm startup - duration ====


'''Dimension''': 2D, table
'''Ref''': [[DME_table_reference#Exhaust_flap_open_at_warm_startup_-_duration|Exhaust flap open at warm startup - duration]]
 
'''Brief description''': TVSTAKR
 
'''Dimension''': constant


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': 1/min, % --> °
'''Units''': s


'''Breakpoints''': Tming min. burble (cold) X (autogen) vs Tming min. burble (cold) Y (autogen)


'''Base''':
'''Base''':


            320   640  1216  1600  2400  4000  5600  6528
   0.0100
  11.8  -20.5  -23.5  -23.0  -17.0  -11.5  -8.5  -9.0  -7.5
  19.4  -23.0  -26.5  -28.5  -22.0  -16.0  -12.5  -14.0 -12.5
  33.7  -29.5  -34.5  -36.5  -28.5  -21.0  -18.0  -19.0  -18.0
  65.7  -34.0  -38.5  -40.0  -33.0  -27.0  -23.5  -24.5  -23.5
  96.9  -35.5  -39.0  -40.0  -35.0  -29.0  -26.5  -26.5  -26.0
  151.7  -29.0  -31.0  -32.5  -31.5  -27.0  -24.0  -25.0  -23.5
  160.0  -27.5  -30.0  -31.5  -30.5  -26.5  -24.0  -24.5  -23.5
  170.0  -26.5  -28.0  -30.0  -30.0  -26.5  -23.5  -24.0  -23.0


'''Difference''':
'''Difference''':


            320    640  1216  1600  2400  4000  5600  6528
   -0.0100
  11.8    7.5  11.0  11.0    9.5    2.5  -1.5   -0.5    4.0
  19.4    4.5    8.5  10.5    8.5    2.0  -2.5  -1.5    5.0
  33.7    4.5  10.0  11.0  10.0    3.0    0.0    0.5    7.5
  65.7    9.0  14.0  14.5  14.5    9.0    5.5    6.0  13.0
  96.9    9.5  13.5  18.5  18.0  17.0  19.0  25.0  28.0
  151.7    5.0    7.5  15.0  19.5  16.5  16.5  22.0  25.5
  160.0    6.5    9.5  15.0  17.5  15.0  13.5  19.5  20.5
  170.0    3.5    5.5    8.5  13.0  10.0    9.5  14.5  15.5


'''Modified''':
'''Modified''':


            320   640  1216  1600  2400  4000  5600  6528
   0.0000
  11.8  -13.0  -12.5  -12.0  -7.5  -9.0  -10.0  -9.5  -3.5
  19.4  -18.5  -18.0  -18.0  -13.5  -14.0  -15.0  -15.5  -7.5
  33.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  65.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  96.9  -26.0  -25.5  -21.5  -17.0  -12.0  -7.5  -1.5    2.0
  151.7  -24.0  -23.5  -17.5  -12.0  -10.5  -7.5  -3.0    2.0
  160.0  -21.0  -20.5  -16.5  -13.0 -11.5  -10.5  -5.0  -3.0
  170.0  -23.0  -22.5  -21.5  -17.0  -16.5  -14.0  -9.5  -7.5


==== Timing offset burble (sport) ====
'''Notes''':
 
  This is the delay time for activation of the exhaust flap after start. Setting to zero enables the flap immediately after cold start. See [[DME_table_reference#AKRGRCC]] for details of the DME's exhaust flap control strategy.
 
==== Exhaust flap min speed to control flap with pedal ====
 
'''Ref''': [[DME_table_reference#Exhaust_flap_min_speed_to_control_flap_with_pedal|Exhaust flap min speed to control flap with pedal]]


'''Brief description''': KF_DZWMIN_SPORT_SOT
'''Brief Description''': VMINAKR


'''Dimension''': 2D, table
'''Dimension''': 1D, vector


'''Categories''': Exhaust
'''Categories''': Exhaust


'''Unit info''': 1/min, km/h --> °
'''Unit info''': km/h
 
'''Breakpoints''': <labels>


'''Breakpoints''': Timing offset burble (sport) X (autogen) vs Timing offset burble (sport) Y (autogen)


'''Base''':
'''Base''':


          1500  2200  2900  3600  5000  6000
  0   0   0   0   0
    0 -3.5  -3.5  -3.5  -3.5  -4.0 -3.5
  20  0   0  20  0
    10  -3.5  -3.5  -3.5  -3.5  -4.0 -3.5
    50  -4.5  -4.5  -4.5  -4.5  -5.5  -4.5
  110  -6.0 -6.0 -6.0 -6.0  -7.5  -6.0


'''Difference''':
'''Difference''':


          1500  2200  2900  3600  5000  6000
    0    0    0    0   0
    0   3.5  3.5  3.5  3.5  4.0   3.5
   -20    0   0  -20   0
    10  1.5  1.5  1.5  1.5  2.0   1.5
    50  -0.5  -0.5  -0.5 -0.5  1.5  0.5
   110  1.0  1.0  1.0  1.0  2.5  1.0


'''Modified''':
'''Modified''':


          1500  2200  2900  3600  5000  6000
   0  0  0  0  0
    0  0.0   0.0  0.0  0.0  0.0  0.0
  0  0  0  0  0
    10  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0
    50  -5.0  -5.0  -5.0  -5.0  -4.0  -4.0
  110  -5.0  -5.0  -5.0  -5.0  -5.0  -5.0


==== Timing offset burble (base) ====
'''Notes''':


'''Brief description''': KF_DZWMIN_NORMAL_SOT
  Each slot in this 5-element array serves a different purpose:
1. Threshold speed for flap activation
2. as above but at cold start
3. as above but for var1
4. as above but for var2
5. as above but for var3


'''Dimension''': 2D, table


'''Categories''': Exhaust
==== AKRGRCC ====
 
'''Unit info''': 1/min, km/h --> °
 
'''Breakpoints''': Timing offset burble (base) X (autogen) vs Timing offset burble (base) Y (autogen)
 
'''Base''':
 
          1500  2200  2900  3600  4300  5000
    0  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
    10  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
    90  -4.5  -4.5  -4.5  -4.5  -5.5  -4.5
  110  -6.0  -6.0  -6.0  -6.0  -7.5  -6.0
 
'''Difference''':
 
          1500  2200  2900  3600  4300  5000
    0  3.5  3.5  3.5  3.5  4.0  3.5
    10  3.5  3.5  3.5  3.5  4.0  3.5
    90  4.5  4.5  4.5  4.5  5.5  4.5
  110  6.0  6.0  6.0  6.0  7.5  6.0


'''Modified''':
'''Ref''': [[DME_table_reference#AKRGRCC|AKRGRCC]]
 
          1500  2200  2900  3600  4300  5000
    0  0.0  0.0  0.0  0.0  0.0  0.0
    10  0.0  0.0  0.0  0.0  0.0  0.0
    90  0.0  0.0  0.0  0.0  0.0  0.0
  110  0.0  0.0  0.0  0.0  0.0  0.0
 
==== AKRGRCC ====


'''Brief description''': AKRGRCC
'''Brief description''': AKRGRCC
Line 1,332: Line 1,436:


==== AKRGRCCAT ====
==== AKRGRCCAT ====
'''Ref''': [[DME_table_reference#AKRGRCCAT|AKRGRCCAT]]


'''Brief description''': AKRGRCCAT
'''Brief description''': AKRGRCCAT
Line 1,345: Line 1,451:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760  3000  3520  4000  4520
          1240  1520  1760  1880  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,359: Line 1,465:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
            0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
Line 1,372: Line 1,478:


==== AKRGRCCATM ====
==== AKRGRCCATM ====
'''Ref''': [[DME_table_reference#AKRGRCCATM|AKRGRCCATM]]


'''Brief description''': AKRGRCCATM
'''Brief description''': AKRGRCCATM
Line 1,385: Line 1,493:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
          1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,399: Line 1,507:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,413: Line 1,521:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,426: Line 1,534:


==== AKRGRCCATM_VAR1 ====
==== AKRGRCCATM_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCCATM_VAR1|AKRGRCCATM_VAR1]]


'''Brief description''': AKRGRCCATM_VAR1
'''Brief description''': AKRGRCCATM_VAR1
Line 1,439: Line 1,549:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760
          1200  1320  1520  1760  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,451: Line 1,561:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520
              0    1520    2000    2240    2520    2760    3000    3520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,463: Line 1,573:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,474: Line 1,584:


==== AKRGRCCATM_VAR2 ====
==== AKRGRCCATM_VAR2 ====
'''Ref''': [[DME_table_reference#AKRGRCCATM_VAR2|AKRGRCCATM_VAR2]]


'''Brief description''': AKRGRCCATM_VAR2
'''Brief description''': AKRGRCCATM_VAR2
Line 1,487: Line 1,599:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760
          1200  1320  1520  1760  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,499: Line 1,611:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520
              0    1520    2000    2240    2520    2760    3000    3520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,511: Line 1,623:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,522: Line 1,634:


==== AKRGRCCATM_VAR3 ====
==== AKRGRCCATM_VAR3 ====
'''Ref''': [[DME_table_reference#AKRGRCCATM_VAR3|AKRGRCCATM_VAR3]]


'''Brief description''': AKRGRCCATM_VAR3
'''Brief description''': AKRGRCCATM_VAR3
Line 1,535: Line 1,649:
'''Base''':
'''Base''':


          1520  1760  2000  2240  2520  2760  3000  3520
        1520  1760  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,547: Line 1,661:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,559: Line 1,673:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,570: Line 1,684:


==== AKRGRCCAT_VAR1 ====
==== AKRGRCCAT_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCCAT_VAR1|AKRGRCCAT_VAR1]]


'''Brief description''': AKRGRCCAT_VAR1
'''Brief description''': AKRGRCCAT_VAR1
Line 1,583: Line 1,699:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760
          1240  1520  1760  1880  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,595: Line 1,711:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,607: Line 1,723:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,618: Line 1,734:


==== AKRGRCCAT_VAR2 ====
==== AKRGRCCAT_VAR2 ====
'''Ref''': [[DME_table_reference#AKRGRCCAT_VAR2|AKRGRCCAT_VAR2]]


'''Brief description''': AKRGRCCAT_VAR2
'''Brief description''': AKRGRCCAT_VAR2
Line 1,631: Line 1,749:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760
          1240  1520  1760  1880  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,643: Line 1,761:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,655: Line 1,773:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,666: Line 1,784:


==== AKRGRCCAT_VAR3 ====
==== AKRGRCCAT_VAR3 ====
'''Ref''': [[DME_table_reference#AKRGRCCAT_VAR3|AKRGRCCAT_VAR3]]


'''Brief description''': AKRGRCCAT_VAR3
'''Brief description''': AKRGRCCAT_VAR3
Line 1,679: Line 1,799:
'''Base''':
'''Base''':


          1520  1760  2000  2240  2520  2760  3000  3520
        1520  1760  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,691: Line 1,811:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,703: Line 1,823:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,714: Line 1,834:


==== AKRGRCCM ====
==== AKRGRCCM ====
'''Ref''': [[DME_table_reference#AKRGRCCM|AKRGRCCM]]


'''Brief description''': AKRGRCCM
'''Brief description''': AKRGRCCM
Line 1,727: Line 1,849:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
          1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,741: Line 1,863:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,755: Line 1,877:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,768: Line 1,890:


==== AKRGRCCM_VAR1 ====
==== AKRGRCCM_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCCM_VAR1|AKRGRCCM_VAR1]]


'''Brief description''': AKRGRCCM_VAR1
'''Brief description''': AKRGRCCM_VAR1
Line 1,781: Line 1,905:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760
          1200  1320  1520  1760  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,791: Line 1,915:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520
              0    1520    2000    2240    2520    2760    3000    3520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,801: Line 1,925:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,810: Line 1,934:


==== AKRGRCCM_VAR2 ====
==== AKRGRCCM_VAR2 ====
'''Ref''': [[DME_table_reference#AKRGRCCM_VAR2|AKRGRCCM_VAR2]]


'''Brief description''': AKRGRCCM_VAR2
'''Brief description''': AKRGRCCM_VAR2
Line 1,823: Line 1,949:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760
          1200  1320  1520  1760  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,833: Line 1,959:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520
              0    1520    2000    2240    2520    2760    3000    3520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,843: Line 1,969:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,852: Line 1,978:


==== AKRGRCCM_VAR3 ====
==== AKRGRCCM_VAR3 ====
'''Ref''': [[DME_table_reference#AKRGRCCM_VAR3|AKRGRCCM_VAR3]]


'''Brief description''': AKRGRCCM_VAR3
'''Brief description''': AKRGRCCM_VAR3
Line 1,865: Line 1,993:
'''Base''':
'''Base''':


          1520  1760  2000  2240  2520  2760  3000  3520
        1520  1760  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,875: Line 2,003:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,885: Line 2,013:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 1,894: Line 2,022:


==== AKRGRCC_VAR1 ====
==== AKRGRCC_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCC_VAR1|AKRGRCC_VAR1]]


'''Brief description''': AKRGRCC_VAR1
'''Brief description''': AKRGRCC_VAR1
Line 1,907: Line 2,037:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760
          1240  1520  1760  1880  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,917: Line 2,047:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,927: Line 2,057:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,936: Line 2,066:


==== AKRGRCC_VAR2 ====
==== AKRGRCC_VAR2 ====
'''Ref''': [[DME_table_reference#AKRGRCC_VAR2|AKRGRCC_VAR2]]


'''Brief description''': AKRGRCC_VAR2
'''Brief description''': AKRGRCC_VAR2
Line 1,949: Line 2,081:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760
          1240  1520  1760  1880  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 1,959: Line 2,091:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,969: Line 2,101:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 1,978: Line 2,110:


==== AKRGRCC_VAR3 ====
==== AKRGRCC_VAR3 ====
'''Ref''': [[DME_table_reference#AKRGRCC_VAR3|AKRGRCC_VAR3]]


'''Brief description''': AKRGRCC_VAR3
'''Brief description''': AKRGRCC_VAR3
Line 1,991: Line 2,125:
'''Base''':
'''Base''':


          1520  1760  2000  2240  2520  2760  3000  3520
        1520  1760  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 2,001: Line 2,135:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 2,011: Line 2,145:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 2,020: Line 2,154:


==== AKRGRCO ====
==== AKRGRCO ====
'''Ref''': [[DME_table_reference#AKRGRCO|AKRGRCO]]


'''Brief description''': AKRGRCO
'''Brief description''': AKRGRCO
Line 2,033: Line 2,169:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760  3000  3520  4000  4520
          1240  1520  1760  1880  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,047: Line 2,183:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
            0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
Line 2,061: Line 2,197:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
            0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
Line 2,074: Line 2,210:


==== AKRGRCOAT ====
==== AKRGRCOAT ====
'''Ref''': [[DME_table_reference#AKRGRCOAT|AKRGRCOAT]]


'''Brief description''': AKRGRCOAT
'''Brief description''': AKRGRCOAT
Line 2,087: Line 2,225:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760  3000  3520  4000  4520
          1240  1520  1760  1880  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,101: Line 2,239:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
            0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
Line 2,115: Line 2,253:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
            0  1520  2000  2240  2520  3480  3520  3960  4000  4520  5000  5520
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0    0.0    0.0    0.0
Line 2,128: Line 2,266:


==== AKRGRCOATM ====
==== AKRGRCOATM ====
'''Ref''': [[DME_table_reference#AKRGRCOATM|AKRGRCOATM]]


'''Brief description''': AKRGRCOATM
'''Brief description''': AKRGRCOATM
Line 2,141: Line 2,281:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
          1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,155: Line 2,295:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,169: Line 2,309:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 2,182: Line 2,322:


==== AKRGRCOATM_VAR1 ====
==== AKRGRCOATM_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCOATM_VAR1|AKRGRCOATM_VAR1]]


'''Brief description''': AKRGRCOATM_VAR1
'''Brief description''': AKRGRCOATM_VAR1
Line 2,195: Line 2,337:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760
          1200  1320  1520  1760  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,207: Line 2,349:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520
              0    1520    2000    2240    2520    2760    3000    3520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,219: Line 2,361:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 2,230: Line 2,372:


==== AKRGRCOAT_VAR1 ====
==== AKRGRCOAT_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCOAT_VAR1|AKRGRCOAT_VAR1]]


'''Brief description''': AKRGRCOAT_VAR1
'''Brief description''': AKRGRCOAT_VAR1
Line 2,243: Line 2,387:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760
          1240  1520  1760  1880  2000  2240  2520  2760
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  70.2  50.2  30.2  10.2  10.2  10.2  10.2
   1.00  100.0  70.2  50.2  30.2  10.2  10.2  10.2  10.2
Line 2,255: Line 2,399:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0  29.8  49.8  69.8  89.8  60.0  60.0  -10.2
   1.00    0.0  29.8  49.8  69.8  89.8  60.0  60.0  -10.2
Line 2,267: Line 2,411:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 2,278: Line 2,422:


==== AKRGRCOM ====
==== AKRGRCOM ====
'''Ref''': [[DME_table_reference#AKRGRCOM|AKRGRCOM]]


'''Brief description''': AKRGRCOM
'''Brief description''': AKRGRCOM
Line 2,291: Line 2,437:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
          1200  1320  1520  1760  2000  2240  2520  2760  3000  3520  4000  4520
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,305: Line 2,451:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,319: Line 2,465:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 2,332: Line 2,478:


==== AKRGRCOM_VAR1 ====
==== AKRGRCOM_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCOM_VAR1|AKRGRCOM_VAR1]]


'''Brief description''': AKRGRCOM_VAR1
'''Brief description''': AKRGRCOM_VAR1
Line 2,345: Line 2,493:
'''Base''':
'''Base''':


            1200  1320  1520  1760  2000  2240  2520  2760
          1200  1320  1520  1760  2000  2240  2520  2760
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,355: Line 2,503:
'''Difference''':
'''Difference''':


                0    1520    2000    2240    2520    2760    3000    3520
              0    1520    2000    2240    2520    2760    3000    3520
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
Line 2,365: Line 2,513:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  2520  2760  3000  3520
          0  1520  2000  2240  2520  2760  3000  3520
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   0.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
   1.00  0.0  0.0  0.0  0.0  0.0  0.0  0.0  0.0
Line 2,374: Line 2,522:


==== AKRGRCO_VAR1 ====
==== AKRGRCO_VAR1 ====
'''Ref''': [[DME_table_reference#AKRGRCO_VAR1|AKRGRCO_VAR1]]


'''Brief description''': AKRGRCO_VAR1
'''Brief description''': AKRGRCO_VAR1
Line 2,387: Line 2,537:
'''Base''':
'''Base''':


            1240  1520  1760  1880  2000  2240  2520  2760
          1240  1520  1760  1880  2000  2240  2520  2760
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  70.2  50.2  30.2  10.2  10.2  10.2  10.2
   1.00  100.0  70.2  50.2  30.2  10.2  10.2  10.2  10.2
Line 2,397: Line 2,547:
'''Difference''':
'''Difference''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
   1.00    0.0  29.8  49.8  69.8  89.8  60.0  60.0  -10.2
   1.00    0.0  29.8  49.8  69.8  89.8  60.0  60.0  -10.2
Line 2,407: Line 2,557:
'''Modified''':
'''Modified''':


              0  1520  2000  2240  3480  3520  3960  4000
            0  1520  2000  2240  3480  3520  3960  4000
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   1.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
Line 2,415: Line 2,565:
   5.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0
   5.00  100.0  100.0  100.0  100.0  100.0  70.2  70.2    0.0


==== Exhaust flap open at warm startup - duration ====
=== Unresolved ===


'''Brief description''': TVSTAKR
==== Mass flow ratio (floor) for diag sensor pressure in CP ====


'''Dimension''': constant
'''Ref''': [[DME_table_reference#Mass_flow_ratio_(floor)_for_diag_sensor_pressure_in_CP|Mass flow ratio (floor) for diag sensor pressure in CP]]


'''Categories''': Exhaust
'''Brief description''': KF_FMS_HFMPL_MN


'''Units''': s
'''Dimension''': 2D, table


'''Categories''': MAF
'''Unit info''': 1/min, % --> -
'''Breakpoints''': Mass flow ratio (floor) for diag sensor pressure in CP X (autogen) vs Mass flow ratio (floor) for diag sensor pressure in CP Y (autogen)


'''Base''':
'''Base''':


   0.0100
          10.0  15.0  20.0  30.0  40.0  50.0
  2500  0.250  0.250  0.250  0.250  0.250  0.250
   5000  0.500  0.500  0.500  0.500  0.500  0.500
  7500  0.500  0.500  0.500  0.500  0.500  0.500
  10000  0.500  0.500  0.500  0.500  0.500  0.500
  12500  0.600  0.600  0.600  0.600  0.450  0.450
  15000  0.600  0.600  0.600  0.600  0.450  0.450


'''Difference''':
'''Difference''':


   -0.0100
          10.0  15.0  20.0  30.0   40.0  50.0
  2500  0.150  0.150  0.150  0.150  0.150  0.150
  5000  0.000  0.000  0.000  0.000  0.000  0.000
  7500  0.100  0.100  0.100  0.100  0.100  0.100
  10000  0.100  0.100  0.100  0.100  0.100  0.100
  12500  0.000  0.000  0.000  0.000  0.150  0.150
  15000  0.000  0.000  0.000  0.000  0.150  0.150


'''Modified''':
'''Modified''':


   0.0000
          10.0  15.0  20.0  30.0  40.0  50.0
  2500  0.400  0.400  0.400  0.400  0.400  0.400
   5000  0.500  0.500  0.500  0.500  0.500  0.500
  7500  0.600  0.600  0.600  0.600  0.600  0.600
  10000  0.600  0.600  0.600  0.600  0.600  0.600
  12500  0.600  0.600  0.600  0.600  0.600  0.600
  15000  0.600  0.600  0.600  0.600  0.600  0.600


==== Exhaust flap min speed to control flap with pedal ====
'''Notes''':
 
'''Brief Description''': VMINAKR
 
'''Dimension''': 1D, vector
 
'''Categories''': Exhaust
 
'''Unit info''': - --> km/h
 
'''Breakpoints''': <labels>
 
 
'''Base''':
 
  0  0  0  0  0
  20  0  0  20  0
 
'''Difference''':
 
    0    0    0    0    0
  -20    0    0  -20    0
 
'''Modified''':
 
  0  0  0  0  0
  0  0  0  0  0
 
==== VMAX coding active ====
 
'''Brief description''': CWVMAXCOD
 
'''Dimension''': constant
 
'''Categories''': Exhaust
 
'''Units''':
 
 
'''Base''':
 
        1
 
'''Difference''':
 
      -1
 
'''Modified''':
 
        0
 
==== VMAX switch - set to FF ====
 
'''Brief description''':
 
'''Dimension''': constant
 
'''Categories''': Exhaust
 
'''Units''':
 
 
'''Base''':
 
      0.0
 
'''Difference''':
 
    255.0
 
'''Modified''':
 
    255.0
 
==== VMAX by inactive coding ====
 
'''Brief description''': VMAXOVC
 
'''Dimension''': constant
 
'''Categories''': Exhaust
 
'''Units''': km/h
 
 
'''Base''':
 
      30
 
'''Difference''':
 
      370
 
'''Modified''':
 
      400
 
==== Untere Drehzahlschwelle des zulässigen Bereiches für CVO ====
 
'''Brief description''': InjSys_nLowrThdCvo_C
 
'''Dimension''': constant
 
'''Categories''': Dev
 
'''Units''': rpm
 
 
'''Base''':
 
    0.000
 
'''Difference''':
 
3000.000
 
'''Modified''':
 
3000.000
 
==== Untere Grenze des Anzugsstroms des MSV ====
 
'''Brief description''': MfVDTypC_iPullin_MAP
 
'''Dimension''': 2D, table
 
'''Categories''': Dev
 
'''Unit info''': rpm, mV --> A
 
'''Breakpoints''': Untere Grenze des Anzugsstroms des MSV X (autogen) vs Untere Grenze des Anzugsstroms des MSV Y (autogen)
 
'''Base''':
 
            600  2000  3000  4520  6000  7000
  6000  4.200  4.400  4.800  5.080  5.200  5.320
  10800  4.200  4.400  4.800  5.080  5.200  5.320
  12000  4.200  4.400  4.720  4.800  5.080  5.200
  14000  4.200  4.400  4.600  4.720  4.920  5.000
  18000  4.200  4.400  4.400  4.520  4.720  4.800
 
'''Difference''':
 
            600  2000  3000  4520  6000  7000
  6000  2.080  1.880  1.480  1.200  1.080  0.960
  10800  2.080  1.880  1.480  1.200  1.080  0.960
  12000  2.080  1.880  1.560  1.480  1.200  1.080
  14000  2.080  1.880  1.680  1.560  1.360  1.280
  18000  2.080  1.880  1.880  1.760  1.560  1.480
 
'''Modified''':
 
            600  2000  3000  4520  6000  7000
  6000  6.280  6.280  6.280  6.280  6.280  6.280
  10800  6.280  6.280  6.280  6.280  6.280  6.280
  12000  6.280  6.280  6.280  6.280  6.280  6.280
  14000  6.280  6.280  6.280  6.280  6.280  6.280
  18000  6.280  6.280  6.280  6.280  6.280  6.280
 
==== MSV Verzögerungszeit in Abhängigkeit der Batteriespannung ====
 
'''Brief Description''': MfVDTypC_KLVZMSVUB
 
'''Dimension''': 1D, vector
 
'''Categories''': Dev
 
'''Unit info''': mV --> ms
 
'''Breakpoints''': MSV Verzögerungszeit in Abhängigkeit der Batteriespannung X (autogen)
 
 
'''Base''':
 
  6000  10800  12000  14000  18000
  3.000  1.800  1.750  1.700  1.600
 
'''Difference''':
 
    6000  10800  12000  14000  18000
  -0.150  0.500  0.450  0.400  0.400
 
'''Modified''':
 
  6000  10800  12000  14000  18000
  2.850  2.300  2.200  2.100  2.000
 
==== Obere Schwelle für Motortemperatur für stromreduzierte Ansteuerung ====
 
'''Brief description''': MfVDTypC_TMSVRECURO
 
'''Dimension''': constant
 
'''Categories''': Dev
 
'''Units''': deg C
 
 
'''Base''':
 
    125.3
 
'''Difference''':
 
  -225.3
 
'''Modified''':
 
  -100.0
 
==== Untere Grenze des Haltestroms des MSV ====
 
'''Brief description''': MfVlv_iHold_C
 
'''Dimension''': constant
 
'''Categories''': Dev
 
'''Units''': A
 
 
'''Base''':
 
    1.60
 
'''Difference''':
 
    1.40
 
'''Modified''':
 
    3.00
 
==== Mass flow ratio (floor) for diag sensor pressure in CP ====
 
'''Brief description''': KF_FMS_HFMPL_MN
 
'''Dimension''': 2D, table
 
'''Categories''': MAF
 
'''Unit info''': 1/min, % --> -
 
'''Breakpoints''': Mass flow ratio (floor) for diag sensor pressure in CP X (autogen) vs Mass flow ratio (floor) for diag sensor pressure in CP Y (autogen)
 
'''Base''':
 
            10.0  15.0  20.0  30.0  40.0  50.0
  2500  0.250  0.250  0.250  0.250  0.250  0.250
  5000  0.500  0.500  0.500  0.500  0.500  0.500
  7500  0.500  0.500  0.500  0.500  0.500  0.500
  10000  0.500  0.500  0.500  0.500  0.500  0.500
  12500  0.600  0.600  0.600  0.600  0.450  0.450
  15000  0.600  0.600  0.600  0.600  0.450  0.450
 
'''Difference''':


            10.0  15.0  20.0  30.0  40.0  50.0
   Opinions seem divided on what this table is. It appears to be definining a range for a plausibility check for mass flow. Outside which it considers the MAF sensor implausible and switches to the the charge pipe sensor? The values, though, are not MAF in g/s and it's not clear what the axis represent either. A few questions to answer here, perhaps with the help of the FRM.
   2500  0.150  0.150  0.150  0.150  0.150  0.150
  5000  0.000  0.000  0.000  0.000  0.000  0.000
  7500  0.100  0.100  0.100  0.100  0.100  0.100
  10000  0.100  0.100  0.100  0.100  0.100  0.100
  12500  0.000  0.000  0.000  0.000  0.150  0.150
  15000  0.000  0.000  0.000  0.000  0.150  0.150
 
'''Modified''':
 
            10.0  15.0  20.0  30.0  40.0  50.0
  2500  0.400  0.400  0.400  0.400  0.400  0.400
  5000  0.500  0.500  0.500  0.500  0.500  0.500
  7500  0.600  0.600  0.600  0.600  0.600  0.600
  10000  0.600  0.600  0.600  0.600  0.600  0.600
  12500  0.600  0.600  0.600  0.600  0.600  0.600
  15000  0.600  0.600  0.600  0.600  0.600  0.600


== Unmodified tables ==
== Unmodified tables ==
Line 2,847: Line 2,749:
Factor for dyn. corrections based on IAT and Retard (MT) (Ignition)
Factor for dyn. corrections based on IAT and Retard (MT) (Ignition)


Temp. based correction 2 (spool) (Ignition)
  Temp. based correction 2 (spool) (Ignition)


Temp. based correction 1 (spool) (Ignition)
Temp. based correction 1 (spool) (Ignition)
Line 3,044: Line 2,946:


Mass flow ratio (floor) for diag MAF (MAF)
Mass flow ratio (floor) for diag MAF (MAF)
Antilag Timing (Base) (MHD+ Suite, Antilag)

Latest revision as of 07:19, 26 July 2024

Introduction[edit]

The M-Performance power and sound kit (MPPSK) is a basic tune that

  • raises the driver's torque request a small amount
  • tweaks how the pedal delivers that torque
  • raises a couple of limits accordingly
  • makes a number of exhaust flap and burble changes. This includes some VANOS adjustments.

Importantly, it does not modify

  • airflow or boost
  • load limits
  • downpipe or turbo characteristics
  • fuelling
  • ignition timing. The DME has built in support for burbles so though in practice the burbles do change timing, the tune does not directly modify the ignition timing tables.

The changes for burbles are quite extensive but understanding them is optional since MHD, BM3 and MD flasher all have built in support for burbles.

This makes the tune good as

  • A way to get your head into the mechanics of tuning.
  • A base to start your own stage 1 map.
  • A way for more advanced tuners to get to grips with tuning for burbles.

Table analysis[edit]

The essential changes[edit]

Torque request ceiling[edit]

Ref: Torque request ceiling

Brief Description: BMWtqe_tqc_FlApplStgNorm_T

Dimension: 1D, vector

Categories: Limits

Unit info: 1/min --> Nm

Breakpoints: Torque request ceiling X (autogen)


Base: 

  800   900   1000  1250  1380  1500  1520  2000  2500  4500  4750  5000  5200  5500  6000  6500  6750  7000
500.0 500.0  500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 490.0 474.0 458.0 434.0 398.0 368.0 353.0 333.0

Difference: 

 1000  1100  1200  1300  1380  1450  1520  2000  2500  3000  3500  4000  4800  4900  5500  6000  6500  7000
  0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0  10.0  26.0  42.0  61.0  62.0  54.0  36.0  17.0

Modified: 

 1000  1100  1200  1300  1380  1450  1520  2000  2500  3000  3500  4000  4800  4900  5500  6000  6500  7000
500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 500.0 495.0 460.0 422.0 389.0 350.0

Notes: 

 This table defines the range of torque input from the accelerator pedal vs RPM. Also checkout the relative torque request tables which add engine load as another dimension. You can see that torque ranges from 500Nm at low RPM to 350Nm at redline. You might reasonably ask 'why would you drop the torque request at higher RPM?'. To answer this question it's important to understand that the torque requested from the ECU is not the torque the car actually delivers. From the torque request, the ECU calculates a load request (i.e. it works out how much air should be in the combustion chamber). From this load request is then calculates the required boost. Both load and boost are themselves limited, in the ECU and by the hardware on the car. So while it is possible to raise the torque here, you want to be sure that load and boost limits are consistent and that the turbo can actually deliver the boost required. For most tunes, you will want more torque. For this tune, we know that the stock turbo is not very capable above 5000 RPM so we can understand that the BMW engineers have put in conservative values.

Max power (monitoring)[edit]

Ref: Max power (monitoring)

Brief description: MoFTrqPtd_pwrMax_C, Maximum performance of the engine.

Dimension: constant

Categories: Limits

Units: kW


Base: 

250.0000

Difference: 

 15.0000

Modified: 

265.0000

Notes: 

  265kW is about 350HP.

Max allowed raw speed for signal check[edit]

Ref: Max allowed raw speed for signal check

Brief description: VROHMAX

Dimension: constant

Categories: Limits

Units: km/h


Base: 

   275.0

Difference: 

   125.0

Modified: 

   400.0

Notes: 

  It is not clear what signal is being checked in the unlikely event the car reaches 400km/h. The MPPSK tune is lifting it out of range, so it is safe to assume this is a nanny that other tunes can also lift.

Maximum indicated torque (Nm)[edit]

Ref: Maximum indicated torque (Nm)

Brief description: EngDa_tqInnrMax_C

Dimension: constant

Categories: Limits

Units: Nm


Base: 

  571.00

Difference: 

 -221.00

Modified: 

  350.00

Notes: 

  What does this do? The tunerpro XDF translates this as maximum indicated torque but clearly 350Nm is not the max indicated torque in MPPSK. This suggests that for practical purposes, tunes can leave the value as stock or scale it sensibly.

Max. torque at trans MT[edit]

Ref: Max. torque at trans MT

Brief Description: KL_MDG_MAX_GANG_HS

Dimension: 1D, vector

Categories: Limits, Torque limiting maps

Unit info: - --> Nm

Breakpoints: Max. torque at trans MT X (autogen)


Base: 

    0     1     2     3     4     5     6     7     8     9
 3277  3277  3277  3277  3277  3277  3277  3277  3277  3277

Difference: 

     0      1      2      3      4      5      6      7      8      9
 -2797  -2797  -2797  -2797  -2797  -2797  -2797  -2797  -2797  -2797

Modified: 

   0    1    2    3    4    5    6    7    8    9
 480  480  480  480  480  480  480  480  480  480

Notes: 

  Not used in the stock tune though MPPSK does set this. Tunes should leave stock.

Speed-dependent full load line of the engine (Nkw_opt) for manual shift[edit]

Ref: Speed-dependent full load line of the engine (Nkw_opt) for manual shift

Brief Description: KL_MD_K_MAX_VL_HS

Dimension: 1D, vector

Categories: Limits, Torque limiting maps

Unit info: 1/min --> Nm

Breakpoints: Speed-dependent full load line of the engine (Nkw_opt) for manual shift X (autogen)


Base: 

  1000   1250   1300   2500   3500   4500   4750   5000   5500   6000   6500   7000
 500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0

Difference: 

 1000  1250  1300  2500  3500  4500  4750  5000  5500  6000  6500  7000
 -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0

Modified: 

  1000   1250   1300   2500   3500   4500   4750   5000   5500   6000   6500   7000
 498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0

Notes: 

 These values can be thought of as dynamic torque limits used in the calculation of the driver's wish. Somewhat vaguely, they assist the cars different handling of the pedal relative to the car's speed (and gear). For example, when cruising at 80mph and 30% throttle, that throttle position becomes a base for the throttle map. In any case, we can see that the stock and MPPSK set the values equal to the maximum clutch torque.

Speed-dependent full load line of the engine (Nkw_opt)[edit]

Ref: Speed-dependent full load line of the engine (Nkw_opt)

Brief Description: KL_MD_K_MAX_VL

Dimension: 1D, vector

Categories: Limits, Torque limiting maps

Unit info: 1/min --> Nm

Breakpoints: Speed-dependent full load line of the engine (Nkw_opt) X (autogen)


Base: 

  1000   1250   1300   2500   3500   4500   4750   5000   5500   6000   6500   7000
 500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0  500.0

Difference: 

 1000  1250  1300  2500  3500  4500  4750  5000  5500  6000  6500  7000
 -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0

Modified: 

  1000   1250   1300   2500   3500   4500   4750   5000   5500   6000   6500   7000
 498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0  498.0

Optional accelerator pedal changes[edit]

B58 pedal feel is set using a twofold lookup. First, the range of torque available (vs RPM) is provided by Torque request ceiling and the driver's pedal position is scaled into this range. Then a relative torque request table is selected according to the driving mode.

The tunerpro XDF's expose relative torque request tables for the sport modes (with and without manual shift selected). If you have the a2l for your platform, you might also want to add the addresses of drive mode with manual switch (KF_MDR_ABV_D_HS) or drive mode with auto (KF_MDR_ABV_D).

Relative torque request sport MT 1[edit]

Ref: Relative torque request sport MT 1

Brief description: KF_MDR_ABV_SPO_HS

Dimension: 2D, table

Categories: Throttle

Unit info: -, - --> -

Breakpoints: Relative torque request sport MT 1 X (autogen) vs Relative torque request sport MT 1 Y (autogen)

Base: 

            0.000    8.200   16.000   43.300  150.000  190.000  220.000  230.000  250.000  270.000
     0.0    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
     6.0    3.230    4.383    4.715    5.785    6.551    7.059    8.125    8.125    8.125    8.125
    14.0    9.063   12.191   13.109   16.078   18.211   18.820   25.156   25.156   25.156   25.156
    22.2   18.453   23.090   24.824   28.617   32.129   33.043   42.598   42.598   42.598   42.598
    33.3   35.816   40.871   42.637   47.199   52.109   52.820   65.070   65.070   65.070   65.070
    44.4   51.566   54.809   55.922   60.039   67.590   69.215   80.328   80.328   80.328   80.328
    55.6   63.309   65.605   66.598   70.070   77.539   79.570   88.211   88.211   88.211   88.211
    66.7   73.152   74.512   75.414   78.559   85.137   86.355   93.414   93.414   93.414   93.414
    77.8   81.480   81.902   82.730   86.176   91.258   92.172   97.305   97.305   97.305   97.305
    88.9   87.766   88.652   89.102   92.348   96.129   96.941   99.793   99.793   99.793   99.793
    94.5   93.883   94.328   94.551   96.176   98.066   98.473   99.898   99.898   99.898   99.898
   100.0  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Difference: 

            0.000    0.000    0.000    8.200   16.000   46.000   72.000  100.000  250.000  350.000
     0.0    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
     6.0    0.000   -1.152   -1.484   -1.402   -1.836   -1.273   -1.574   -1.066    0.000    0.000
    14.0    0.000   -3.129   -4.047   -3.887   -5.102   -2.742   -6.945   -6.336    0.000    0.000
    22.2    0.000   -4.637   -6.371   -5.527   -7.305   -4.426  -10.469   -9.555    0.000    0.000
    33.3    0.000   -5.055   -6.820   -6.328   -9.473   -5.621  -12.961  -12.250    0.000    0.000
    44.4    0.000   -3.242   -4.355   -5.230  -11.668   -9.176  -12.738  -11.113    0.000    0.000
    55.6    0.000   -2.297   -3.289   -4.465  -10.941   -9.500  -10.672   -8.641    0.000    0.000
    66.7    0.000   -1.359   -2.262   -4.047   -9.723   -7.797   -8.277   -7.059    0.000    0.000
    77.8    0.000   -0.422   -1.250   -4.273   -8.527   -5.996   -6.047   -5.133    0.000    0.000
    88.9    0.000   -0.887   -1.336   -3.695   -7.027   -4.594   -3.664   -2.852    0.000    0.000
   100.0    6.117    5.672    5.449    3.824    1.934    1.527    0.102    0.102    0.102    0.102
   100.0    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000

Modified: 

            0.000    0.000    0.000    8.200   16.000   46.000   72.000  100.000  250.000  350.000
     0.0    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
     6.0    3.230    3.230    3.230    4.383    4.715    5.785    6.551    7.059    8.125    8.125
    14.0    9.063    9.063    9.063   12.191   13.109   16.078   18.211   18.820   25.156   25.156
    22.2   18.453   18.453   18.453   23.090   24.824   28.617   32.129   33.043   42.598   42.598
    33.3   35.816   35.816   35.816   40.871   42.637   47.199   52.109   52.820   65.070   65.070
    44.4   51.566   51.566   51.566   54.809   55.922   60.039   67.590   69.215   80.328   80.328
    55.6   63.309   63.309   63.309   65.605   66.598   70.070   77.539   79.570   88.211   88.211
    66.7   73.152   73.152   73.152   74.512   75.414   78.559   85.137   86.355   93.414   93.414
    77.8   81.480   81.480   81.480   81.902   82.730   86.176   91.258   92.172   97.305   97.305
    88.9   87.766   87.766   87.766   88.652   89.102   92.348   96.129   96.941   99.793   99.793
   100.0  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000
   100.0  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Notes: 

  The throttle changes are optional. These tables affect pedal feel in the various driving modes. The tunerpro XDFs expose sport driving modes. There are also tables for drive (i.e. comfort mode) and ecopro, though these are not described in the XDF. The basic idea is to stop the car from getting too jumpy in traffic but give a sense of power on the open road.

 The MPPSK rescales the x breakpoints and so vectors the torque differently. The x axis is the unmodified torque request (i.e. max torque request x accelerator pedal position) and the y axis is itself the pedal position.

  TODO: according to https://f30.bimmerpost.com/forums/showthread.php?t=1734153, the x axis is vehicle speed in km/h, however, this seems odd because 350km = 217miles, which is an unrealistic speed to be thinking about pedal feel. Confirm if x axis is torque in Nm or speed in km/h?

Relative torque request sport MT 2[edit]

Ref: Relative torque request sport MT 2

Brief description: KF_MDR_ABV_SPO2_HS

Dimension: 2D, table

Categories: Throttle

Unit info: -, - --> -

Breakpoints: Relative torque request sport MT 2 X (autogen) vs Relative torque request sport MT 2 Y (autogen)

Base: 

            0.000    8.200   16.000   43.300  150.000  190.000  220.000  230.000  250.000  270.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006    3.230    5.277    5.480    6.008    6.008    6.008    6.008    6.008    6.008    6.008
  13.989    8.309   12.234   12.539   13.988   13.988   13.988   13.988   13.988   13.988   13.988
  22.217   15.453   19.180   19.688   22.746   22.746   22.746   22.746   22.746   22.746   22.746
  33.325   25.430   29.523   29.930   35.711   35.711   35.711   35.711   35.711   35.711   35.711
  44.434   36.164   40.141   40.648   48.879   48.879   48.879   48.879   48.879   48.879   48.879
  55.566   47.387   50.902   51.613   61.125   61.125   61.125   61.125   61.125   61.125   61.125
  66.675   59.152   61.988   62.598   70.984   70.984   70.984   70.984   70.984   70.984   70.984
  77.783   70.934   73.648   74.258   80.203   80.203   80.203   80.203   80.203   80.203   80.203
  88.892   84.668   86.117   86.625   90.063   90.063   90.063   90.063   90.063   90.063   90.063
  94.507   92.336   93.152   93.152   94.742   94.742   94.742   94.742   94.742   94.742   94.742
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Difference: 

            9.000   19.300   28.400   45.000   53.600   70.000   90.000  119.300  158.000  240.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   1.001    0.125   -2.230   -3.102   -3.645   -3.949   -3.586   -3.637   -3.547   -3.801   -5.125
  10.010    7.188    1.148   -0.289   -3.457   -3.824   -3.914   -1.570    0.375    2.457    3.020
  19.995   11.102    4.211    3.012   -2.648   -4.020   -2.430    0.172    3.469    7.383   10.066
  30.005   10.707    3.754    2.629   -6.293   -6.492   -4.484   -1.793    2.926    6.484   10.227
  39.990   11.133    3.957    2.953   -9.332   -9.633   -8.020   -4.875    0.410    4.645    8.930
  50.000   12.199    5.238    3.461   -9.723  -10.676   -9.258   -6.910   -2.281    2.332    7.637
  60.010   14.758    8.113    5.016   -7.301   -8.086   -7.414   -5.559   -1.242    4.273   10.484
  69.995   18.750   12.832    9.949   -0.035   -1.586   -1.555    0.547    3.527    6.961    9.215
  85.010   14.129   12.680   11.871    7.230    5.543    2.172   -0.039   -0.090    1.074    2.363
  98.999    7.664    6.848    6.848    5.258    5.258    3.992    1.855    0.875    0.609    0.551
 100.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000

Modified: 

            9.000   19.300   28.400   45.000   53.600   70.000   90.000  119.300  158.000  240.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   1.001    3.355    3.047    2.379    2.363    2.059    2.422    2.371    2.461    2.207    0.883
  10.010   15.496   13.383   12.250   10.531   10.164   10.074   12.418   14.363   16.445   17.008
  19.995   26.555   23.391   22.699   20.098   18.727   20.316   22.918   26.215   30.129   32.813
  30.005   36.137   33.277   32.559   29.418   29.219   31.227   33.918   38.637   42.195   45.938
  39.990   47.297   44.098   43.602   39.547   39.246   40.859   44.004   49.289   53.523   57.809
  50.000   59.586   56.141   55.074   51.402   50.449   51.867   54.215   58.844   63.457   68.762
  60.010   73.910   70.102   67.613   63.684   62.898   63.570   65.426   69.742   75.258   81.469
  69.995   89.684   86.480   84.207   80.168   78.617   78.648   80.750   83.730   87.164   89.418
  85.010   98.797   98.797   98.496   97.293   95.605   92.234   90.023   89.973   91.137   92.426
  98.999  100.000  100.000  100.000  100.000  100.000   98.734   96.598   95.617   95.352   95.293
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Relative torque request sport 2[edit]

Ref: Relative torque request sport 2

Brief description: KF_MDR_ABV_SPO2

Dimension: 2D, table

Categories: Throttle

Unit info: -, - --> -

Breakpoints: Relative torque request sport 2 X (autogen) vs Relative torque request sport 2 Y (autogen)

Base: 

            0.000    8.200   16.000   40.300   70.000   90.000  110.000  130.000  240.000  260.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006    2.137    2.566    2.672    1.824    2.926    4.145    5.008    5.879    6.984    6.984
  13.989    6.559    7.879    8.207    5.879    8.398   11.922   15.441   17.422   21.891   21.891
  22.217   11.789   14.023   14.750   10.848   14.484   20.984   26.410   30.066   37.648   37.648
  33.325   20.375   23.516   23.996   20.590   26.711   33.613   41.426   47.133   57.527   57.527
  44.434   31.043   34.027   34.371   31.250   41.523   49.836   56.973   64.148   74.441   74.441
  55.566   43.305   45.555   46.016   41.988   55.223   65.488   72.574   80.000   89.000   89.000
  66.870   55.781   57.777   57.777   53.602   69.859   79.984   85.613   90.000   96.922   96.922
  77.783   69.293   70.012   70.012   64.887   81.324   88.984   95.734   96.000   99.000   99.000
  88.892   86.348   88.113   88.113   81.867   91.793   94.527   99.000   99.000   99.500   99.500
  94.507   93.176   94.059   94.059   90.934   95.898   97.266   99.500   99.500   99.750   99.750
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Difference: 

            0.000   18.000   27.000   43.000   52.000   67.000   86.000  102.000  130.000  240.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006    4.496    3.570    2.270    2.504    1.309   -0.016    0.074   -0.672   -2.406    2.531
  15.991    6.617    4.805    3.340    2.797    0.293   -2.727   -5.551   -7.285   -9.836    5.707
  22.998   14.754   10.492    9.855    8.605    4.262   -0.445   -2.961   -5.484   -7.793   21.711
  34.009   19.188   12.773   12.523    9.176    3.117   -1.754   -5.082   -8.219  -11.902   28.363
  44.995   23.504   17.023   15.914   11.621    1.422   -3.832   -4.664   -8.082  -11.438   25.559
  50.000   17.484   11.750    9.961    6.105   -7.395  -14.918  -15.262  -17.332  -19.148   11.000
  69.995   28.512   23.500   19.324   18.332    1.793   -8.512   -5.496   -5.125   -1.094    3.078
  80.005   28.523   25.066   19.801   19.762    3.781   -4.199   -3.273    2.457    1.000    1.000
  89.990   13.652   11.887   11.887   18.133    8.207    5.473    1.000    1.000    0.500    0.500
 100.000    6.824    5.941    5.941    9.066    4.102    2.734    0.500    0.500    0.250    0.250
 100.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000

Modified: 

            0.000   18.000   27.000   43.000   52.000   67.000   86.000  102.000  130.000  240.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006    6.633    6.137    4.941    4.328    4.234    4.129    5.082    5.207    4.578    9.516
  15.991   13.176   12.684   11.547    8.676    8.691    9.195    9.891   10.137   12.055   27.598
  22.998   26.543   24.516   24.605   19.453   18.746   20.539   23.449   24.582   29.855   59.359
  34.009   39.563   36.289   36.520   29.766   29.828   31.859   36.344   38.914   45.625   85.891
  44.995   54.547   51.051   50.285   42.871   42.945   46.004   52.309   56.066   63.004  100.000
  50.000   60.789   57.305   55.977   48.094   47.828   50.570   57.313   62.668   69.852  100.000
  69.995   84.293   81.277   77.102   71.934   71.652   71.473   80.117   84.875   95.828  100.000
  80.005   97.816   95.078   89.813   84.648   85.105   84.785   92.461   98.457  100.000  100.000
  89.990  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Relative torque request sport[edit]

Ref: Relative torque request sport

Brief description: KF_MDR_ABV_SPO

Dimension: 2D, table

Categories: Throttle

Unit info: -, - --> -

Breakpoints: Relative torque request sport X (autogen) vs Relative torque request sport Y (autogen)

Base: 

            0.000    8.200   16.000   39.200   70.000   90.000  110.000  130.000  240.000  260.000
   0.000    1.000    0.320    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006    4.152    3.914    3.723    3.270    3.793    5.016    6.191    6.906    8.570    8.586
  13.989    8.059    8.328    8.266    7.531    9.391   12.426   15.535   17.508   22.051   22.230
  22.217   12.680   13.395   13.652   13.191   16.535   21.641   26.570   29.898   37.406   37.691
  33.325   18.973   20.316   21.215   21.965   28.098   34.523   41.254   46.215   56.305   56.770
  44.434   26.750   28.492   29.988   32.117   41.668   49.465   56.625   62.559   73.125   73.621
  55.566   35.223   37.410   39.523   42.895   55.262   64.328   71.457   77.371   86.777   87.262
  66.870   44.438   47.008   49.613   54.215   68.637   77.734   83.926   88.113   95.047   95.414
  77.783   54.945   58.090   61.109   65.996   79.996   87.379   92.816   94.766   98.277   98.473
  88.892   69.520   73.031   76.090   80.602   89.918   93.930   97.309   98.332   99.355   99.426
  94.507   82.926   85.965   87.918   90.695   95.258   97.227   98.914   99.371   99.723   99.742
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Difference: 

            0.000    8.200   16.000   43.300   70.000   90.000  110.000  130.000  240.000  260.000
   0.000   -1.000   -0.320    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006   -2.250   -1.629   -1.344   -1.516   -0.867   -0.871   -1.184   -1.027   -1.586   -1.602
  13.989   -2.230   -1.328   -0.973   -1.879   -0.992   -0.504   -0.094   -0.086   -0.160   -0.340
  22.217   -2.199   -0.930   -0.539   -2.762   -2.051   -0.656   -0.160    0.168    0.242   -0.043
  33.325   -0.504    1.000    0.535   -2.168   -1.387   -0.910    0.172    0.918    1.223    0.758
  44.434    1.117    2.051    0.863   -2.945   -0.145    0.371    0.348    1.590    1.316    0.820
  55.566    3.648    3.480    1.781   -3.695   -0.039    1.160    1.117    2.629    2.223    1.738
  66.675    5.633    4.855    2.250   -4.176    1.223    2.250    1.688    1.887    1.875    1.508
  77.783    7.254    4.754    1.734   -5.422    1.328    1.605    2.918    1.234    0.723    0.527
  88.892    7.988    6.063    3.004   -4.176    1.875    0.598    1.691    0.668    0.145    0.074
 100.000   17.074   14.035   12.082    9.305    4.742    2.773    1.086    0.629    0.277    0.258
 100.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000

Modified: 

            0.000    8.200   16.000   43.300   70.000   90.000  110.000  130.000  240.000  260.000
   0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
   6.006    1.902    2.285    2.379    1.754    2.926    4.145    5.008    5.879    6.984    6.984
  13.989    5.828    7.000    7.293    5.652    8.398   11.922   15.441   17.422   21.891   21.891
  22.217   10.480   12.465   13.113   10.430   14.484   20.984   26.410   30.066   37.648   37.648
  33.325   18.469   21.316   21.750   19.797   26.711   33.613   41.426   47.133   57.527   57.527
  44.434   27.867   30.543   30.852   29.172   41.523   49.836   56.973   64.148   74.441   74.441
  55.566   38.871   40.891   41.305   39.199   55.223   65.488   72.574   80.000   89.000   89.000
  66.675   50.070   51.863   51.863   50.039   69.859   79.984   85.613   90.000   96.922   96.922
  77.783   62.199   62.844   62.844   60.574   81.324   88.984   95.734   96.000   99.000   99.000
  88.892   77.508   79.094   79.094   76.426   91.793   94.527   99.000   99.000   99.500   99.500
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000
 100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000  100.000

Exhaust flap and burbles settings[edit]

Vanos settings[edit]

Ref: Vanos settings

The VANOS tables are lookups of load and RPM to VANOS setpoint (a value which modifies the valve opening time relative to the combustion cycle).

To understand the VANOS changes, it helps to look first at the differences to stock. Stock values for the intake side are reduced by 1-5 degrees and there are no changes to the exhaust side.

Reducing the intake values opens and closes the intake valve earlier. The effect of this reduction is to increase valve overlap.

There are no changes to the valve lift so the intake duration remains unchanged. In the graph below, the effect of valve lift would be to move the bell curve up or down. This does not change in MPPSK, which simplifies matters.

Vanos overlap vs setpoint

Vanos maps have a characteristic fisherman's chair shape. There are saddles in both the load and RPM axes with the minimums at about 70% load and 3500 RPM. As the car accelerates, load and RPM increase, so the setpoint will track diagonally across the map (and there is a saddle in that direction too).

MPPSK intake setpoint

Some properties of this are:

  1. Typically the B58 idles at <20% load and 650 RPM. Here, the vanos setpoint is high. This ensures low valve overlap and thus a good idle. The MPPSK has a touch more overlap than stock, perhaps to make the idle sound more lumpy?
  2. As soon as any load is put on the engine, setpoints drop, which increases overlap to improve the engine's efficiency and introduce the EGR required to reduce lethal NOx emissions to targets.
  3. As RPM (and load) increase, the timing of the intake valve is retarded (i.e. the setpoints increase). The values are choosen (presuably correctly) to optimize cylinder charging and thus maximise power.

Vanos IN (warm) 1[edit]

Ref: Vanos IN (warm) 1

Brief description: GKF_ESPR_NORM_WARM_PF1

Dimension: 2D, table

Categories: Vanos

Unit info: 1/min, % --> °

Breakpoints: Vanos IN (warm) 1 X (autogen) vs Vanos IN (warm) 1 Y (autogen)

Base: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0   98.5   96.9   95.2   94.4   94.2   93.2   92.6   92.5   91.8   92.9   92.6   92.2   97.0  100.8  101.7  110.9
  18.0   90.5   86.5   81.2   80.6   79.8   78.1   77.1   79.7   83.0   84.0   84.0   85.5   91.6   96.2   97.2  106.6
  22.0   82.1   77.4   70.3   69.7   68.6   67.5   66.7   70.2   75.4   76.3   76.0   78.2   85.5   90.9   91.8  101.4
  27.0   74.2   69.5   62.7   62.0   60.9   60.5   59.7   62.9   68.6   69.0   68.3   70.5   79.0   84.7   85.4   95.2
  35.0   69.2   65.3   59.6   57.4   56.5   55.9   55.1   57.9   63.0   63.5   62.9   65.0   75.0   80.2   81.6   90.5
  45.0   67.4   65.1   61.5   59.8   59.0   58.1   58.0   58.4   60.9   61.5   60.8   62.1   73.0   77.6   80.5   88.9
  55.0   70.5   69.5   67.8   65.0   64.2   63.7   63.7   62.6   64.9   63.7   62.9   64.7   73.6   77.9   82.3   91.3
  70.0   79.5   78.8   77.8   75.9   76.3   74.4   76.3   74.7   74.6   71.9   70.4   72.6   77.8   82.5   88.5   98.9
  90.0   94.1   93.1   92.4   90.3   87.3   85.1   85.1   83.4   80.7   79.7   80.0   82.1   85.6   89.5   94.4  101.9
 110.0   98.7   98.3   97.7   94.7   91.9   90.4   90.1   87.9   85.8   85.4   86.2   88.0   90.4   93.5   97.1  102.2
 140.0  102.6  102.4  102.0   97.8   96.4   96.0   95.8   93.2   92.2   92.2   93.6   94.8   96.0   97.9   99.8  101.9
 160.0  103.2  103.0  102.7   98.6   97.9   97.8   97.6   95.0   94.3   94.4   95.9   96.8   97.8   99.1  100.4  101.7

Difference: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0   -2.0   -1.9   -1.9   -1.9   -1.9   -1.9   -1.9   -1.9   -1.8   -1.9   -1.9   -1.8   -1.9   -2.0   -2.0   -2.2
  18.0   -1.8   -1.7   -1.6   -1.6   -1.6   -1.6   -1.5   -1.6   -1.7   -1.7   -1.7   -1.7   -1.8   -1.9   -1.9   -2.1
  22.0   -1.6   -1.5   -1.4   -1.4   -1.4   -1.3   -1.3   -1.4   -1.5   -1.5   -1.5   -1.6   -1.7   -1.8   -1.8   -2.0
  27.0   -1.5   -1.4   -1.3   -1.2   -1.2   -1.2   -1.2   -1.3   -1.4   -1.4   -1.4   -1.4   -1.6   -1.7   -1.7   -1.9
  35.0   -1.4   -1.3   -1.2   -1.1   -1.1   -1.1   -1.1   -1.2   -1.3   -1.3   -1.3   -1.3   -1.5   -1.6   -1.6   -1.8
  45.0   -1.3   -1.3   -1.2   -1.2   -1.2   -1.2   -1.2   -1.2   -1.2   -1.2   -1.2   -1.2   -1.5   -1.6   -1.6   -1.8
  55.0   -1.4   -1.4   -1.4   -1.3   -1.3   -1.3   -1.3   -1.3   -1.3   -1.3   -1.3   -1.3   -1.5   -1.6   -1.6   -1.8
  70.0   -1.6   -1.6   -1.6   -1.5   -1.5   -1.5   -1.5   -1.5   -1.5   -1.4   -1.4   -1.5   -1.6   -1.6   -1.8   -2.0
  90.0   -1.9   -1.9   -1.8   -1.8   -1.7   -1.7   -1.7   -1.7   -1.6   -1.6   -1.6   -1.6   -1.7   -1.8   -1.9   -2.0
 110.0   -2.0   -2.0   -2.0   -1.9   -1.8   -1.8   -1.8   -1.8   -1.7   -1.7   -1.7   -1.8   -1.8   -1.9   -1.9   -2.0
 140.0   -2.1   -2.0   -2.0   -2.0   -1.9   -1.9   -1.9   -1.9   -1.8   -1.8   -1.9   -1.9   -1.9   -2.0   -2.0   -2.0
 160.0   -2.1   -2.1   -2.1   -2.0   -2.0   -2.0   -2.0   -1.9   -1.9   -1.9   -1.9   -1.9   -2.0   -2.0   -2.0   -2.0

Modified: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0   96.5   95.0   93.3   92.5   92.3   91.3   90.7   90.6   90.0   91.0   90.7   90.4   95.1   98.8   99.7  108.7
  18.0   88.7   84.8   79.6   79.0   78.2   76.5   75.6   78.1   81.3   82.3   82.3   83.8   89.8   94.3   95.3  104.5
  22.0   80.5   75.9   68.9   68.3   67.2   66.2   65.4   68.8   73.9   74.8   74.5   76.6   83.8   89.1   90.0   99.4
  27.0   72.7   68.1   61.4   60.8   59.7   59.3   58.5   61.6   67.2   67.6   66.9   69.1   77.4   83.0   83.7   93.3
  35.0   67.8   64.0   58.4   56.3   55.4   54.8   54.0   56.7   61.7   62.2   61.6   63.7   73.5   78.6   80.0   88.7
  45.0   66.1   63.8   60.3   58.6   57.8   56.9   56.8   57.2   59.7   60.3   59.6   60.9   71.5   76.0   78.9   87.1
  55.0   69.1   68.1   66.4   63.7   62.9   62.4   62.4   61.3   63.6   62.4   61.6   63.4   72.1   76.3   80.7   89.5
  70.0   77.9   77.2   76.2   74.4   74.8   72.9   74.8   73.2   73.1   70.5   69.0   71.1   76.2   80.9   86.7   96.9
  90.0   92.2   91.2   90.6   88.5   85.6   83.4   83.4   81.7   79.1   78.1   78.4   80.5   83.9   87.7   92.5   99.9
 110.0   96.7   96.3   95.7   92.8   90.1   88.6   88.3   86.1   84.1   83.7   84.5   86.2   88.6   91.6   95.2  100.2
 140.0  100.5  100.4  100.0   95.8   94.5   94.1   93.9   91.3   90.4   90.4   91.7   92.9   94.1   95.9   97.8   99.9
 160.0  101.1  100.9  100.6   96.6   95.9   95.8   95.6   93.1   92.4   92.5   94.0   94.9   95.8   97.1   98.4   99.7

Vanos IN (warm) 2[edit]

Ref: Vanos IN (warm) 2

Brief description: GKF_ESPR_NORM_WARM_PF2

Dimension: 2D, table

Categories: Vanos

Unit info: 1/min, % --> °

Breakpoints: Vanos IN (warm) 2 X (autogen) vs Vanos IN (warm) 2 Y (autogen)

Base: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
  18.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
  22.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.4  114.8  113.6  113.4  114.2  115.4  117.2  117.5  117.5
  27.0  117.5  117.5  117.5  117.5  117.5  116.8  112.3  106.2  103.2  102.2  102.5  103.7  105.9  108.7  111.8  117.5
  35.0  117.5  117.5  117.5  114.8  107.6  102.4   99.0   94.8   92.7   92.2   92.7   94.1   96.0   99.0  102.1  109.0
  45.0  117.5  117.5  111.7  101.5   95.1   91.5   88.8   86.4   84.6   84.4   84.6   85.5   87.2   89.9   93.6  101.8
  55.0  116.6  111.2  103.2   95.2   89.5   85.4   82.5   80.0   79.0   78.7   79.1   80.6   83.0   85.9   89.4   99.1
  70.0   98.9   95.0   92.0   88.7   85.6   83.4   81.6   79.2   78.2   78.0   78.4   79.7   81.9   84.9   88.4   98.5
  90.0   94.0   93.6   92.9   90.9   87.6   85.4   85.3   83.6   80.7   79.8   80.2   82.3   85.7   89.6   94.5  102.0
 110.0   99.4   99.0   98.4   95.3   92.3   90.9   90.4   88.2   86.0   85.7   86.6   88.4   90.7   93.8   97.4  102.4
 140.0  102.8  102.6  102.2   97.9   96.6   96.2   96.0   93.4   92.4   92.4   93.9   95.0   96.2   98.0   99.9  101.9
 160.0  103.3  103.1  102.8   98.7   98.1   98.0   97.8   95.2   94.6   94.6   96.1   97.0   98.0   99.2  100.5  101.7

Difference: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6
  18.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6
  22.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.5   -4.5   -4.5   -4.5   -4.6   -4.6   -4.6   -4.6
  27.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.4   -4.2   -4.1   -4.0   -4.0   -4.1   -4.2   -4.3   -4.4   -4.6
  35.0   -4.6   -4.6   -4.6   -4.5   -4.3   -4.0   -3.9   -3.8   -3.7   -3.6   -3.7   -3.7   -3.8   -3.9   -4.0   -4.3
  45.0   -4.6   -4.6   -4.4   -4.0   -3.8   -3.6   -3.5   -3.4   -3.4   -3.4   -3.4   -3.4   -3.4   -3.6   -3.7   -4.0
  55.0   -4.6   -4.4   -4.1   -3.8   -3.6   -3.4   -3.2   -3.2   -3.1   -3.1   -3.1   -3.2   -3.3   -3.4   -3.6   -3.9
  70.0   -3.9   -3.8   -3.6   -3.5   -3.4   -3.3   -3.2   -3.2   -3.1   -3.1   -3.1   -3.2   -3.2   -3.4   -3.5   -3.9
  90.0   -3.7   -3.7   -3.7   -3.6   -3.5   -3.4   -3.4   -3.3   -3.2   -3.2   -3.2   -3.2   -3.4   -3.6   -3.8   -4.0
 110.0   -3.9   -3.9   -3.9   -3.8   -3.6   -3.6   -3.6   -3.5   -3.4   -3.4   -3.4   -3.5   -3.6   -3.7   -3.8   -4.0
 140.0   -4.1   -4.1   -4.0   -3.9   -3.8   -3.8   -3.8   -3.7   -3.6   -3.6   -3.7   -3.8   -3.8   -3.9   -4.0   -4.0
 160.0   -4.1   -4.1   -4.1   -3.9   -3.9   -3.9   -3.9   -3.8   -3.8   -3.8   -3.8   -3.8   -3.9   -3.9   -4.0   -4.0

Modified: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
  18.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
  22.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.8  110.3  109.1  108.9  109.7  110.8  112.6  112.9  112.9
  27.0  112.9  112.9  112.9  112.9  112.9  112.2  107.9  102.0   99.1   98.2   98.5   99.6  101.7  104.4  107.4  112.9
  35.0  112.9  112.9  112.9  110.3  103.3   98.4   95.1   91.0   89.0   88.6   89.0   90.4   92.2   95.1   98.1  104.7
  45.0  112.9  112.9  107.3   97.5   91.3   87.9   85.3   83.0   81.2   81.0   81.2   82.1   83.8   86.3   89.9   97.8
  55.0  112.0  106.8   99.1   91.4   85.9   82.0   79.3   76.8   75.9   75.6   76.0   77.4   79.7   82.5   85.8   95.2
  70.0   95.0   91.2   88.4   85.2   82.2   80.1   78.4   76.0   75.1   74.9   75.3   76.5   78.7   81.5   84.9   94.6
  90.0   90.3   89.9   89.2   87.3   84.1   82.0   81.9   80.3   77.5   76.6   77.0   79.1   82.3   86.0   90.7   98.0
 110.0   95.5   95.1   94.5   91.5   88.7   87.3   86.8   84.7   82.6   82.3   83.2   84.9   87.1   90.1   93.6   98.4
 140.0   98.7   98.5   98.2   94.0   92.8   92.4   92.2   89.7   88.8   88.8   90.2   91.2   92.4   94.1   95.9   97.9
 160.0   99.2   99.0   98.7   94.8   94.2   94.1   93.9   91.4   90.8   90.8   92.3   93.2   94.1   95.3   96.5   97.7


Vanos IN (cold) 1[edit]

Ref: Vanos IN (cold) 1

Brief description: GKF_ESPR_NORM_KALT_PF1

Dimension: 2D, table

Categories: Vanos

Unit info: 1/min, % --> °

Breakpoints: Vanos IN (warm) 1 X (autogen) vs Vanos IN (warm) 1 Y (autogen)

Base: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  110.4  111.8  114.7  117.3  115.4  113.4  113.2  113.3  115.4  115.3  116.9  117.3  118.5  119.5  119.6  122.2
  18.0  110.2  110.4  110.9  108.8  104.1   98.8   97.4   97.9   98.3   99.1  101.5  104.4  107.5  109.6  109.6  119.0
  22.0  108.6  107.3  104.9   99.7   92.8   85.8   84.2   83.8   83.9   85.6   88.7   93.1   97.0   99.3   99.2  109.4
  27.0  105.6  102.6   97.3   90.4   82.7   74.9   73.4   72.6   72.6   75.4   78.6   83.3   87.9   90.3   90.3  100.2
  35.0  100.8   96.9   89.2   82.3   74.6   66.7   65.9   65.1   65.1   68.0   71.1   75.7   80.6   83.7   84.6   94.0
  45.0   94.4   90.4   82.6   76.3   69.8   62.4   62.0   60.9   61.0   63.2   65.7   69.7   75.6   78.9   81.4   90.1
  55.0   88.3   85.6   80.3   75.0   69.7   64.6   63.0   61.0   61.6   62.8   64.9   68.7   73.6   77.5   82.1   91.0
  70.0   82.2   81.7   80.6   78.0   75.3   72.7   71.3   70.2   69.5   69.6   70.1   73.7   78.5   83.3   88.7   99.5
  90.0   94.1   93.2   92.5   90.4   87.2   85.0   84.8   83.1   80.4   79.6   80.0   82.2   85.6   89.5   94.4  101.9
 110.0   98.7   98.3   97.7   94.7   91.9   90.4   90.1   87.9   85.8   85.4   86.2   88.0   90.4   93.5   97.1  102.2
 140.0  102.6  102.4  102.0   97.8   96.4   96.0   95.8   93.2   92.2   92.2   93.6   94.8   96.0   97.9   99.8  101.9
 160.0  103.2  103.0  102.7   98.6   97.9   97.8   97.6   95.0   94.3   94.4   95.9   96.8   97.8   99.1  100.4  101.7

Difference: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0   -4.4   -4.4   -4.5   -4.6   -4.6   -4.5   -4.5   -4.5   -4.6   -4.6   -4.6   -4.6   -4.7   -4.7   -4.7   -4.8
  18.0   -4.4   -4.4   -4.4   -4.3   -4.1   -3.9   -3.8   -3.9   -3.9   -3.9   -4.0   -4.1   -4.2   -4.3   -4.3   -4.7
  22.0   -4.3   -4.2   -4.2   -4.0   -3.7   -3.4   -3.3   -3.3   -3.3   -3.4   -3.5   -3.7   -3.8   -3.9   -3.9   -4.3
  27.0   -4.2   -4.1   -3.8   -3.6   -3.3   -3.0   -2.9   -2.9   -2.9   -3.0   -3.1   -3.3   -3.5   -3.6   -3.6   -4.0
  35.0   -4.0   -3.8   -3.5   -3.2   -3.0   -2.6   -2.6   -2.6   -2.6   -2.7   -2.8   -3.0   -3.2   -3.3   -3.4   -3.7
  45.0   -3.8   -3.6   -3.3   -3.0   -2.8   -2.4   -2.4   -2.4   -2.4   -2.5   -2.6   -2.8   -3.0   -3.1   -3.2   -3.6
  55.0   -3.5   -3.4   -3.2   -3.0   -2.8   -2.6   -2.5   -2.4   -2.4   -2.5   -2.6   -2.7   -2.9   -3.0   -3.2   -3.6
  70.0   -3.2   -3.2   -3.2   -3.1   -3.0   -2.9   -2.8   -2.8   -2.8   -2.8   -2.8   -2.9   -3.1   -3.3   -3.5   -3.9
  90.0   -3.7   -3.7   -3.7   -3.6   -3.4   -3.4   -3.4   -3.3   -3.2   -3.2   -3.2   -3.2   -3.4   -3.6   -3.8   -4.0
 110.0   -3.9   -3.9   -3.9   -3.8   -3.6   -3.6   -3.6   -3.5   -3.4   -3.4   -3.4   -3.5   -3.6   -3.7   -3.8   -4.0
 140.0   -4.1   -4.0   -4.0   -3.9   -3.8   -3.8   -3.8   -3.7   -3.6   -3.6   -3.7   -3.8   -3.8   -3.9   -4.0   -4.0
 160.0   -4.1   -4.1   -4.1   -3.9   -3.9   -3.9   -3.9   -3.8   -3.7   -3.8   -3.8   -3.8   -3.9   -3.9   -4.0   -4.0

Modified: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  106.0  107.4  110.2  112.7  110.8  108.9  108.7  108.8  110.8  110.7  112.3  112.7  113.8  114.8  114.9  117.4
  18.0  105.8  106.0  106.5  104.5  100.0   94.9   93.6   94.0   94.4   95.2   97.5  100.3  103.3  105.3  105.3  114.3
  22.0  104.3  103.1  100.7   95.7   89.1   82.4   80.9   80.5   80.6   82.2   85.2   89.4   93.2   95.4   95.3  105.1
  27.0  101.4   98.5   93.5   86.8   79.4   71.9   70.5   69.7   69.7   72.4   75.5   80.0   84.4   86.7   86.7   96.2
  35.0   96.8   93.1   85.7   79.1   71.6   64.1   63.3   62.5   62.5   65.3   68.3   72.7   77.4   80.4   81.2   90.3
  45.0   90.6   86.8   79.3   73.3   67.0   60.0   59.6   58.5   58.6   60.7   63.1   66.9   72.6   75.8   78.2   86.5
  55.0   84.8   82.2   77.1   72.0   66.9   62.0   60.5   58.6   59.2   60.3   62.3   66.0   70.7   74.5   78.9   87.4
  70.0   79.0   78.5   77.4   74.9   72.3   69.8   68.5   67.4   66.7   66.8   67.3   70.8   75.4   80.0   85.2   95.6
  90.0   90.4   89.5   88.8   86.8   83.8   81.6   81.4   79.8   77.2   76.4   76.8   79.0   82.2   85.9   90.6   97.9
 110.0   94.8   94.4   93.8   90.9   88.3   86.8   86.5   84.4   82.4   82.0   82.8   84.5   86.8   89.8   93.3   98.2
 140.0   98.5   98.4   98.0   93.9   92.6   92.2   92.0   89.5   88.6   88.6   89.9   91.0   92.2   94.0   95.8   97.9
 160.0   99.1   98.9   98.6   94.7   94.0   93.9   93.7   91.2   90.6   90.6   92.1   93.0   93.9   95.2   96.4   97.7


Vanos IN (cold) 2[edit]

Ref: Vanos IN (cold) 2

Brief description: GKF_ESPR_NORM_KALT_PF2

Dimension: 2D, table

Categories: Vanos

Unit info: 1/min, % --> °

Breakpoints: Vanos IN (warm) 2 X (autogen) vs Vanos IN (warm) 2 Y (autogen)

Base: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
  18.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.5
  22.0  117.5  117.5  117.5  117.5  117.5  117.5  117.5  117.4  114.8  113.6  113.4  114.2  115.4  117.2  117.5  117.5
  27.0  117.5  117.5  117.5  117.5  117.5  116.8  112.3  106.2  103.2  102.2  102.5  103.7  105.9  108.7  111.8  117.5
  35.0  117.5  117.5  117.5  114.8  107.6  102.4   99.0   94.8   92.7   92.2   92.7   94.1   96.0   99.0  102.1  109.0
  45.0  117.5  117.5  111.7  101.5   95.1   91.5   88.8   86.4   84.6   84.4   84.6   85.5   87.2   89.9   93.6  101.8
  55.0  116.6  111.2  103.2   95.2   89.5   85.4   82.5   80.0   79.0   78.7   79.1   80.6   83.0   85.9   89.4   99.1
  70.0   98.9   95.0   92.0   88.7   85.6   83.4   81.6   79.2   78.2   78.0   78.4   79.7   81.9   84.9   88.4   98.5
  90.0   94.0   93.6   92.9   90.9   87.6   85.4   85.3   83.6   80.7   79.8   80.2   82.3   85.7   89.6   94.5  102.0
 110.0   99.4   99.0   98.4   95.3   92.3   90.9   90.4   88.2   86.0   85.7   86.6   88.4   90.7   93.8   97.4  102.4
 140.0  102.8  102.6  102.2   97.9   96.6   96.2   96.0   93.4   92.4   92.4   93.9   95.0   96.2   98.0   99.9  101.9
 160.0  103.3  103.1  102.8   98.7   98.1   98.0   97.8   95.2   94.6   94.6   96.1   97.0   98.0   99.2  100.5  101.7

Difference: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6
  18.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6
  22.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.5   -4.5   -4.5   -4.5   -4.6   -4.6   -4.6   -4.6
  27.0   -4.6   -4.6   -4.6   -4.6   -4.6   -4.6   -4.4   -4.2   -4.1   -4.0   -4.0   -4.1   -4.2   -4.3   -4.4   -4.6
  35.0   -4.6   -4.6   -4.6   -4.5   -4.3   -4.0   -3.9   -3.8   -3.7   -3.6   -3.7   -3.7   -3.8   -3.9   -4.0   -4.3
  45.0   -4.6   -4.6   -4.4   -4.0   -3.8   -3.6   -3.5   -3.4   -3.4   -3.4   -3.4   -3.4   -3.4   -3.6   -3.7   -4.0
  55.0   -4.6   -4.4   -4.1   -3.8   -3.6   -3.4   -3.2   -3.2   -3.1   -3.1   -3.1   -3.2   -3.3   -3.4   -3.6   -3.9
  70.0   -3.9   -3.8   -3.6   -3.5   -3.4   -3.3   -3.2   -3.2   -3.1   -3.1   -3.1   -3.2   -3.2   -3.4   -3.5   -3.9
  90.0   -3.7   -3.7   -3.7   -3.6   -3.5   -3.4   -3.4   -3.3   -3.2   -3.2   -3.2   -3.2   -3.4   -3.6   -3.8   -4.0
 110.0   -3.9   -3.9   -3.9   -3.8   -3.6   -3.6   -3.6   -3.5   -3.4   -3.4   -3.4   -3.5   -3.6   -3.7   -3.8   -4.0
 140.0   -4.1   -4.1   -4.0   -3.9   -3.8   -3.8   -3.8   -3.7   -3.6   -3.6   -3.7   -3.8   -3.8   -3.9   -4.0   -4.0
 160.0   -4.1   -4.1   -4.1   -3.9   -3.9   -3.9   -3.9   -3.8   -3.8   -3.8   -3.8   -3.8   -3.9   -3.9   -4.0   -4.0

Modified: 

        600.0  800.0 1000.0 1250.0 1500.0 1750.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0 7000.0
  14.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
  18.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.9
  22.0  112.9  112.9  112.9  112.9  112.9  112.9  112.9  112.8  110.3  109.1  108.9  109.7  110.8  112.6  112.9  112.9
  27.0  112.9  112.9  112.9  112.9  112.9  112.2  107.9  102.0   99.1   98.2   98.5   99.6  101.7  104.4  107.4  112.9
  35.0  112.9  112.9  112.9  110.3  103.3   98.4   95.1   91.0   89.0   88.6   89.0   90.4   92.2   95.1   98.1  104.7
  45.0  112.9  112.9  107.3   97.5   91.3   87.9   85.3   83.0   81.2   81.0   81.2   82.1   83.8   86.3   89.9   97.8
  55.0  112.0  106.8   99.1   91.4   85.9   82.0   79.3   76.8   75.9   75.6   76.0   77.4   79.7   82.5   85.8   95.2
  70.0   95.0   91.2   88.4   85.2   82.2   80.1   78.4   76.0   75.1   74.9   75.3   76.5   78.7   81.5   84.9   94.6
  90.0   90.3   89.9   89.2   87.3   84.1   82.0   81.9   80.3   77.5   76.6   77.0   79.1   82.3   86.0   90.7   98.0
 110.0   95.5   95.1   94.5   91.5   88.7   87.3   86.8   84.7   82.6   82.3   83.2   84.9   87.1   90.1   93.6   98.4
 140.0   98.7   98.5   98.2   94.0   92.8   92.4   92.2   89.7   88.8   88.8   90.2   91.2   92.4   94.1   95.9   97.9
 160.0   99.2   99.0   98.7   94.8   94.2   94.1   93.9   91.4   90.8   90.8   92.3   93.2   94.1   95.3   96.5   97.7


Min. speed for burble (SOT)[edit]

Ref: Min. speed for burble (SOT)

Brief description: K_V_SOT_MN

Dimension: constant

Categories: Exhaust

Units: -


Base: 

   2.000

Difference: 

 653.300

Modified: 

 655.300

Notes: 

  Although described as a minimum driving speed, this appears to be a flag. 655.3 is the maximum allowable value. The stock value of 2 seems to work fine in tunes also so custom tunes can probably ignore this.

Burble duration (base)[edit]

Ref: Burble duration (base)

Brief Description: KL_TD_SOUND_MX

Dimension: 1D, vector

Categories: Exhaust

Unit info: km/h --> s

Breakpoints: Burble duration (base) X (autogen)


Base: 

   5.000    7.000   90.000  110.000
   4.000    1.000    1.000    0.500

Difference: 

   5.000    7.000   90.000  110.000
   0.000    0.000   -0.500   -0.500

Modified: 

   5.000    7.000   90.000  110.000
   4.000    1.000    0.500    0.000

Burble duration sport[edit]

Ref: Burble duration sport

Brief Description: KL_TD_SOUND_MX_SPORT

Dimension: 1D, vector

Categories: Exhaust

Unit info: km/h --> s

Breakpoints: Burble duration sport X (autogen)


Base: 

   5.000    7.000   90.000  110.000
   0.800    0.800    0.800    0.800

Difference: 

   5.000    7.000   90.000  110.000
   3.200    1.200    1.200    1.200

Modified: 

   5.000    7.000   90.000  110.000
   4.000    2.000    2.000    2.000

Notes: 

  The 2 second values here are pretty aggressive. 1.5 seconds are considered by many as tasteful burbles. The German for burbles is Schub-blub-bern -- a word which everybody should use when talking this.


Faktor fuer Schubblubbern im Stand[edit]

Ref: Faktor fuer Schubblubbern im Stand

Brief description: K_F_SOT_RUECKBLICK_STAND

Dimension: constant

Categories: Exhaust

Units: -


Base: 

   0.000

Difference: 

   0.996

Modified: 

   0.996

Notes: 

  This is the burble factor when the car is stationary.

Basic catalyst heating mode wish[edit]

Ref: Basic catalyst heating mode wish

Brief description: BMWchas_st_OpmBasc_M

Dimension: 2D, table

Categories: Exhaust

Unit info: s, °C --> -

Breakpoints: Basic catalyst heating mode wish X (autogen) vs Basic catalyst heating mode wish Y (autogen)

Base: 

           10.000   20.000   25.000   30.000   38.000   40.000   60.000   62.000
 -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
   9.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  18.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  35.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  45.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  45.600    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000
  80.000    2.000    2.000    2.000    2.000    1.000    0.000    0.000    0.000

Difference: 

           10.000   20.000   25.000   35.000   50.000   55.000   75.000   80.000
 -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000
   9.000    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000
  18.000    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000
  35.000    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000
  45.000    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000
  45.600    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000
  80.000    0.000    0.000    0.000   -1.000    0.000    1.000    1.000    0.000

Modified: 

           10.000   20.000   25.000   35.000   50.000   55.000   75.000   80.000
 -10.500    0.000    0.000    0.000    0.000    0.000    0.000    0.000    0.000
  -9.800    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
   9.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  18.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  35.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  45.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  45.600    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000
  80.000    2.000    2.000    2.000    1.000    1.000    1.000    1.000    0.000

Notes: 

  Small and probably ignorable changes here.

Codeword sound[edit]

Ref: Codeword sound

Brief description: CW_SOUND

Dimension: constant

Categories: Exhaust

Units: -

Base: 

   9.000

Difference: 

  32.000

Modified: 

  41.000

Notes: 

  A flag controlling the behaviour of the ECU's burble support. The FRM needed to decode the possible values.

Tming min. burble (main)[edit]

Ref: Tming min. burble (main)

Brief description: KF_ZWMIN_WSOT

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, % --> °

Breakpoints: Tming min. burble (main) X (autogen) vs Tming min. burble (main) Y (autogen)

Base: 

          320    640   1216   1600   2400   4000   5600   6528
  11.8  -20.5  -23.5  -23.0  -17.0  -11.5   -8.5   -9.0   -7.5
  19.4  -23.0  -26.5  -28.5  -22.0  -16.0  -12.5  -14.0  -12.5
  33.7  -29.5  -34.5  -36.5  -28.5  -21.0  -18.0  -19.0  -18.0
  65.7  -34.0  -38.5  -40.0  -33.0  -27.0  -23.5  -24.5  -23.5
  96.9  -35.5  -39.0  -40.0  -35.0  -29.0  -26.5  -26.5  -26.0
 151.7  -29.0  -31.0  -32.5  -31.5  -27.0  -24.0  -25.0  -23.5
 160.0  -27.5  -30.0  -31.5  -30.5  -26.5  -24.0  -24.5  -23.5
 170.0  -26.5  -28.0  -30.0  -30.0  -26.5  -23.5  -24.0  -23.0

Difference: 

          320    640   1216   1600   2400   4000   5600   6528
  11.8    7.5   11.0   11.0    9.5    2.5   -1.5   -0.5    4.0
  19.4    4.5    8.5   10.5    8.5    2.0   -2.5   -1.5    5.0
  33.7    4.5   10.0   11.0   10.0    3.0    0.0    0.5    7.5
  65.7    9.0   14.0   14.5   14.5    9.0    5.5    6.0   13.0
  96.9    9.5   13.5   18.5   18.0   17.0   19.0   25.0   28.0
 151.7    5.0    7.5   15.0   19.5   16.5   16.5   22.0   25.5
 160.0    6.5    9.5   15.0   17.5   15.0   13.5   19.5   20.5
 170.0    3.5    5.5    8.5   13.0   10.0    9.5   14.5   15.5

Modified: 

          320    640   1216   1600   2400   4000   5600   6528
  11.8  -13.0  -12.5  -12.0   -7.5   -9.0  -10.0   -9.5   -3.5
  19.4  -18.5  -18.0  -18.0  -13.5  -14.0  -15.0  -15.5   -7.5
  33.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  65.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  96.9  -26.0  -25.5  -21.5  -17.0  -12.0   -7.5   -1.5    2.0
 151.7  -24.0  -23.5  -17.5  -12.0  -10.5   -7.5   -3.0    2.0
 160.0  -21.0  -20.5  -16.5  -13.0  -11.5  -10.5   -5.0   -3.0
 170.0  -23.0  -22.5  -21.5  -17.0  -16.5  -14.0   -9.5   -7.5

Notes: 

  Tentative understanding to date: the traditional method of burble tuning involves a two step process
  1. editing timing tables so as to retard timing at low load and high RPM. This ensures the spark occurs so late that not all fuel will ignite before the exhaust is open.
  2. editing the fuel table for the same load/rpm range to inject more fuel than is normally required on overrun (i.e. more than zero). The effect is thus to shove unburnt fuel down the exhaust which then ignites in the exhuast.

The B58 has built in burble support and does things differently. Instead, you specify the min timing values for which the ECU should enable burbles. The effect in either case is to choose a range of load and RPM over which you want burbles. In line with step 1 above, there are then timing offset tables which tell the ECU how much to modify the timing during burbles. 

  Questions to answer:
  1. The stock main burble table has timings well into the -20s which are never obtained in practice. This suggests some other table is also being used.

Tming min. burble (cold)[edit]

Ref: Tming min. burble (cold)

Brief description: KF_ZWMIN_KSOT

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, % --> °

Breakpoints: Tming min. burble (cold) X (autogen) vs Tming min. burble (cold) Y (autogen)

Base: 

          320    640   1216   1600   2400   4000   5600   6528
  11.8  -20.5  -23.5  -23.0  -17.0  -11.5   -8.5   -9.0   -7.5
  19.4  -23.0  -26.5  -28.5  -22.0  -16.0  -12.5  -14.0  -12.5
  33.7  -29.5  -34.5  -36.5  -28.5  -21.0  -18.0  -19.0  -18.0
  65.7  -34.0  -38.5  -40.0  -33.0  -27.0  -23.5  -24.5  -23.5
  96.9  -35.5  -39.0  -40.0  -35.0  -29.0  -26.5  -26.5  -26.0
 151.7  -29.0  -31.0  -32.5  -31.5  -27.0  -24.0  -25.0  -23.5
 160.0  -27.5  -30.0  -31.5  -30.5  -26.5  -24.0  -24.5  -23.5
 170.0  -26.5  -28.0  -30.0  -30.0  -26.5  -23.5  -24.0  -23.0

Difference: 

          320    640   1216   1600   2400   4000   5600   6528
  11.8    7.5   11.0   11.0    9.5    2.5   -1.5   -0.5    4.0
  19.4    4.5    8.5   10.5    8.5    2.0   -2.5   -1.5    5.0
  33.7    4.5   10.0   11.0   10.0    3.0    0.0    0.5    7.5
  65.7    9.0   14.0   14.5   14.5    9.0    5.5    6.0   13.0
  96.9    9.5   13.5   18.5   18.0   17.0   19.0   25.0   28.0
 151.7    5.0    7.5   15.0   19.5   16.5   16.5   22.0   25.5
 160.0    6.5    9.5   15.0   17.5   15.0   13.5   19.5   20.5
 170.0    3.5    5.5    8.5   13.0   10.0    9.5   14.5   15.5

Modified: 

          320    640   1216   1600   2400   4000   5600   6528
  11.8  -13.0  -12.5  -12.0   -7.5   -9.0  -10.0   -9.5   -3.5
  19.4  -18.5  -18.0  -18.0  -13.5  -14.0  -15.0  -15.5   -7.5
  33.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  65.7  -25.0  -24.5  -25.5  -18.5  -18.0  -18.0  -18.5  -10.5
  96.9  -26.0  -25.5  -21.5  -17.0  -12.0   -7.5   -1.5    2.0
 151.7  -24.0  -23.5  -17.5  -12.0  -10.5   -7.5   -3.0    2.0
 160.0  -21.0  -20.5  -16.5  -13.0  -11.5  -10.5   -5.0   -3.0
 170.0  -23.0  -22.5  -21.5  -17.0  -16.5  -14.0   -9.5   -7.5

Timing offset burble (base)[edit]

Ref: Timing offset burble (base)

Brief description: KF_DZWMIN_NORMAL_SOT

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, km/h --> °

Breakpoints: Timing offset burble (base) X (autogen) vs Timing offset burble (base) Y (autogen)

Base: 

       1500  2200  2900  3600  4300  5000
    0  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
   10  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
   90  -4.5  -4.5  -4.5  -4.5  -5.5  -4.5
  110  -6.0  -6.0  -6.0  -6.0  -7.5  -6.0

Difference: 

       1500  2200  2900  3600  4300  5000
    0   3.5   3.5   3.5   3.5   4.0   3.5
   10   3.5   3.5   3.5   3.5   4.0   3.5
   90   4.5   4.5   4.5   4.5   5.5   4.5
  110   6.0   6.0   6.0   6.0   7.5   6.0

Modified: 

       1500  2200  2900  3600  4300  5000
    0   0.0   0.0   0.0   0.0   0.0   0.0
   10   0.0   0.0   0.0   0.0   0.0   0.0
   90   0.0   0.0   0.0   0.0   0.0   0.0
  110   0.0   0.0   0.0   0.0   0.0   0.0


Timing offset burble (sport)[edit]

Ref: Timing offset burble (sport)

Brief description: KF_DZWMIN_SPORT_SOT

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, km/h --> °

Breakpoints: Timing offset burble (sport) X (autogen) vs Timing offset burble (sport) Y (autogen)

Base: 

       1500  2200  2900  3600  5000  6000
    0  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
   10  -3.5  -3.5  -3.5  -3.5  -4.0  -3.5
   50  -4.5  -4.5  -4.5  -4.5  -5.5  -4.5
  110  -6.0  -6.0  -6.0  -6.0  -7.5  -6.0

Difference: 

       1500  2200  2900  3600  5000  6000
    0   3.5   3.5   3.5   3.5   4.0   3.5
   10   1.5   1.5   1.5   1.5   2.0   1.5
   50  -0.5  -0.5  -0.5  -0.5   1.5   0.5
  110   1.0   1.0   1.0   1.0   2.5   1.0

Modified: 

       1500  2200  2900  3600  5000  6000
    0   0.0   0.0   0.0   0.0   0.0   0.0
   10  -2.0  -2.0  -2.0  -2.0  -2.0  -2.0
   50  -5.0  -5.0  -5.0  -5.0  -4.0  -4.0
  110  -5.0  -5.0  -5.0  -5.0  -5.0  -5.0


Hysterese für das schließen der Abgasklappe0[edit]

Ref: Hysterese für das schließen der Abgasklappe0

Brief description: BMWgpfheat_tq_ResExhFlpClsdHys_C

Dimension: constant

Categories: Exhaust

Units: Nm


Base: 

   5.000

Difference: 

  -5.000

Modified: 

   0.000

Notes: 

  This is a hysteresis setting for the exhaust flap to prevent it opening and closing too readily. The MPPSK removes it.

Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0[edit]

Ref: Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0

Brief Description: BMWgpfheat_tq_ResExhFlpClsd_T

Dimension: 1D, vector

Categories: Exhaust

Unit info: 1/min --> Nm

Breakpoints: Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.0 X (autogen)


Base: 

    0   500  1000  3500  3501  5000  6000  7000
   30    30    30    30  1000  1000  1000  1000

Difference: 

  600  1300  2900  3000  4000  5000  6000  7000
  -30   -30   -30   970     0     0     0     0

Modified: 

  600  1300  2900  3000  4000  5000  6000  7000
    0     0     0  1000  1000  1000  1000  1000


maximale Geschwindigkeit bis zu der die Abgasklappe geschlossen bleiben soll.[edit]

Ref: maximale Geschwindigkeit bis zu der die Abgasklappe geschlossen bleiben soll.

Brief description: BMWchas_v_MaxExhFlpClsd_C

Dimension: constant

Categories: Exhaust

Units: km/h


Base: 

      20

Difference: 

     -20

Modified: 

       0

Hysterese für das schließen der Abgasklappe[edit]

Ref: Hysterese für das schließen der Abgasklappe

Brief description: BMWchas_tq_ResExhFlpClsdHys_C

Dimension: constant

Categories: Exhaust

Units: Nm


Base: 

       5

Difference: 

      -5

Modified: 

       0

Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.[edit]

Ref: Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll.

Brief Description: BMWchas_tq_ResExhFlpClsd_T

Dimension: 1D, vector

Categories: Exhaust

Unit info: 1/min --> Nm

Breakpoints: Momentenreserve, ab er die Abgasklappe aus akustischen Gründen geschlossen werden soll. X (autogen)


Base: 

    0   500  1000  3500  3501  5000  6000  7000
   30    30    30    30  1000  1000  1000  1000

Difference: 

  600  1300  2900  3000  4000  5000  6000  7000
  -30   -30   -30   970     0     0     0     0

Modified: 

  600  1300  2900  3000  4000  5000  6000  7000
    0     0     0  1000  1000  1000  1000  1000


Exhaust flap open at warm startup - duration[edit]

Ref: Exhaust flap open at warm startup - duration

Brief description: TVSTAKR

Dimension: constant

Categories: Exhaust

Units: s


Base: 

  0.0100

Difference: 

 -0.0100

Modified: 

  0.0000

Notes: 

  This is the delay time for activation of the exhaust flap after start. Setting to zero enables the flap immediately after cold start. See DME_table_reference#AKRGRCC for details of the DME's exhaust flap control strategy.

Exhaust flap min speed to control flap with pedal[edit]

Ref: Exhaust flap min speed to control flap with pedal

Brief Description: VMINAKR

Dimension: 1D, vector

Categories: Exhaust

Unit info: km/h

Breakpoints: <labels>


Base: 

  0   0   0   0   0
 20   0   0  20   0

Difference: 

   0    0    0    0    0
 -20    0    0  -20    0

Modified: 

 0  0  0  0  0
 0  0  0  0  0

Notes: 

  Each slot in this 5-element array serves a different purpose:
1. Threshold speed for flap activation
2. as above but at cold start
3. as above but for var1
4. as above but for var2
5. as above but for var3


AKRGRCC[edit]

Ref: AKRGRCC

Brief description: AKRGRCC

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCC X (autogen) vs AKRGRCC Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760   3000   3520   4000   4520
     0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     1    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
     2  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     3  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     4  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     5  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     6  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     7  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     8  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
     9  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2


Modified: 

            0   1520   2000   2240   2520   3480   3520   3960   4000   4520   5000   5520
     0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
     1  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     2  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     3  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     4  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     5  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     6  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     7  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     8  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
     9  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0

Notes: 

  See DME_table_reference#AKRGRCC for an explanation of the table names. The effect of the changes in this, and the other exhaust flap tables, is to introduce a more Jekyl and Hide character to the car. The pedal threshold in comfort is actually more conservative than stock but in the M modes it is more aggressive. Specifically, the changes are threefold
* to remove the pedal threshold for burbles above 4000RPM (which is a bit more aggressive than stock)
* to disable burbles at lower RPM in comfort (less aggressive than stock)
* to remove the pedal threshold in M modes (see below).

AKRGRCCAT[edit]

Ref: AKRGRCCAT

Brief description: AKRGRCCAT

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCAT X (autogen) vs AKRGRCCAT Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Modified: 

            0   1520   2000   2240   2520   3480   3520   3960   4000   4520   5000   5520
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  2.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  3.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  4.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  5.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  6.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  7.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  8.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  9.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0

AKRGRCCATM[edit]

Ref: AKRGRCCATM

Brief description: AKRGRCCATM

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCATM X (autogen) vs AKRGRCCATM Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   8.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   9.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 8.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 9.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCATM_VAR1[edit]

Ref: AKRGRCCATM_VAR1

Brief description: AKRGRCCATM_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCATM_VAR1 X (autogen) vs AKRGRCCATM_VAR1 Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCATM_VAR2[edit]

Ref: AKRGRCCATM_VAR2

Brief description: AKRGRCCATM_VAR2

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCATM_VAR2 X (autogen) vs AKRGRCCATM_VAR2 Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCATM_VAR3[edit]

Ref: AKRGRCCATM_VAR3

Brief description: AKRGRCCATM_VAR3

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCATM_VAR3 X (autogen) vs AKRGRCCATM_VAR3 Y (autogen)

Base: 

       1520  1760  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

Difference: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCAT_VAR1[edit]

Ref: AKRGRCCAT_VAR1

Brief description: AKRGRCCAT_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCAT_VAR1 X (autogen) vs AKRGRCCAT_VAR1 Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2
  6.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2
  7.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   60.0   60.0  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2
  6.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2
  7.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  6.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  7.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCCAT_VAR2[edit]

Ref: AKRGRCCAT_VAR2

Brief description: AKRGRCCAT_VAR2

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCAT_VAR2 X (autogen) vs AKRGRCCAT_VAR2 Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2
  6.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2
  7.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   60.0   60.0  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2
  6.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2
  7.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  6.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  7.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCCAT_VAR3[edit]

Ref: AKRGRCCAT_VAR3

Brief description: AKRGRCCAT_VAR3

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCAT_VAR3 X (autogen) vs AKRGRCCAT_VAR3 Y (autogen)

Base: 

       1520  1760  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  6.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  7.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  6.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  7.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCCM[edit]

Ref: AKRGRCCM

Brief description: AKRGRCCM

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCM X (autogen) vs AKRGRCCM Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   8.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   9.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 8.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 9.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCM_VAR1[edit]

Ref: AKRGRCCM_VAR1

Brief description: AKRGRCCM_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCM_VAR1 X (autogen) vs AKRGRCCM_VAR1 Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCM_VAR2[edit]

Ref: AKRGRCCM_VAR2

Brief description: AKRGRCCM_VAR2

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCM_VAR2 X (autogen) vs AKRGRCCM_VAR2 Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCCM_VAR3[edit]

Ref: AKRGRCCM_VAR3

Brief description: AKRGRCCM_VAR3

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCCM_VAR3 X (autogen) vs AKRGRCCM_VAR3 Y (autogen)

Base: 

       1520  1760  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

Difference: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCC_VAR1[edit]

Ref: AKRGRCC_VAR1

Brief description: AKRGRCC_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCC_VAR1 X (autogen) vs AKRGRCC_VAR1 Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   60.0   60.0  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCC_VAR2[edit]

Ref: AKRGRCC_VAR2

Brief description: AKRGRCC_VAR2

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCC_VAR2 X (autogen) vs AKRGRCC_VAR2 Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   60.0   60.0  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCC_VAR3[edit]

Ref: AKRGRCC_VAR3

Brief description: AKRGRCC_VAR3

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCC_VAR3 X (autogen) vs AKRGRCC_VAR3 Y (autogen)

Base: 

       1520  1760  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCO[edit]

Ref: AKRGRCO

Brief description: AKRGRCO

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCO X (autogen) vs AKRGRCO Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   2520   3480   3520   3960   4000   4520   5000   5520
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  2.00    0.0   29.8   49.8   69.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  6.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  7.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  8.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  9.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2

Modified: 

            0   1520   2000   2240   2520   3480   3520   3960   4000   4520   5000   5520
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  2.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  3.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  4.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  5.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  6.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  7.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  8.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  9.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0

AKRGRCOAT[edit]

Ref: AKRGRCOAT

Brief description: AKRGRCOAT

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCOAT X (autogen) vs AKRGRCOAT Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   2520   3480   3520   3960   4000   4520   5000   5520
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  2.00    0.0   29.8   49.8   69.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  6.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  7.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  8.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2
  9.00    0.0    0.0    0.0   29.8   89.8   89.8   60.0   60.0  -10.2  -10.2  -10.2  -10.2

Modified: 

            0   1520   2000   2240   2520   3480   3520   3960   4000   4520   5000   5520
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  2.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  3.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  4.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  5.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  6.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  7.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  8.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0
  9.00  100.0  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0    0.0    0.0    0.0

AKRGRCOATM[edit]

Ref: AKRGRCOATM

Brief description: AKRGRCOATM

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCOATM X (autogen) vs AKRGRCOATM Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   8.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   9.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 8.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 9.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCOATM_VAR1[edit]

Ref: AKRGRCOATM_VAR1

Brief description: AKRGRCOATM_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCOATM_VAR1 X (autogen) vs AKRGRCOATM_VAR1 Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCOAT_VAR1[edit]

Ref: AKRGRCOAT_VAR1

Brief description: AKRGRCOAT_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCOAT_VAR1 X (autogen) vs AKRGRCOAT_VAR1 Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2
  6.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2
  7.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  2.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   60.0   60.0  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2
  6.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2
  7.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  6.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  7.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

AKRGRCOM[edit]

Ref: AKRGRCOM

Brief description: AKRGRCOM

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCOM X (autogen) vs AKRGRCOM Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760   3000   3520   4000   4520
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  6.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  7.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  8.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2
  9.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520    4000    4520    5000    5520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   6.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   7.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   8.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   9.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520  4000  4520  5000  5520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 6.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 7.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 8.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 9.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCOM_VAR1[edit]

Ref: AKRGRCOM_VAR1

Brief description: AKRGRCOM_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCOM_VAR1 X (autogen) vs AKRGRCOM_VAR1 Y (autogen)

Base: 

         1200   1320   1520   1760   2000   2240   2520   2760
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  2.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  3.00   50.2   35.3   10.2   10.2   10.2   10.2   10.2   10.2
  4.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2
  5.00  100.0   70.2   40.0   10.2   10.2   10.2   10.2   10.2

Difference: 

              0    1520    2000    2240    2520    2760    3000    3520
   0.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   1.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   2.00     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
   3.00   -50.2   -35.3   -10.2   -10.2   -10.2   -10.2   -10.2   -10.2
   4.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2
   5.00  -100.0   -70.2   -40.0   -10.2   -10.2   -10.2   -10.2   -10.2

Modified: 

          0  1520  2000  2240  2520  2760  3000  3520
 0.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 1.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 2.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 3.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 4.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0
 5.00   0.0   0.0   0.0   0.0   0.0   0.0   0.0   0.0

AKRGRCO_VAR1[edit]

Ref: AKRGRCO_VAR1

Brief description: AKRGRCO_VAR1

Dimension: 2D, table

Categories: Exhaust

Unit info: 1/min, --> %

Breakpoints: AKRGRCO_VAR1 X (autogen) vs AKRGRCO_VAR1 Y (autogen)

Base: 

         1240   1520   1760   1880   2000   2240   2520   2760
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  2.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  3.00  100.0   70.2   50.2   30.2   10.2   10.2   10.2   10.2
  4.00  100.0  100.0   50.2   30.2   10.2   10.2   10.2   10.2
  5.00  100.0  100.0  100.0   70.2   10.2   10.2   10.2   10.2

Difference: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00    0.0    0.0    0.0    0.0    0.0    0.0    0.0    0.0
  1.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  2.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  3.00    0.0   29.8   49.8   69.8   89.8   60.0   60.0  -10.2
  4.00    0.0    0.0   49.8   69.8   89.8   60.0   60.0  -10.2
  5.00    0.0    0.0    0.0   29.8   89.8   60.0   60.0  -10.2

Modified: 

            0   1520   2000   2240   3480   3520   3960   4000
  0.00  100.0  100.0  100.0  100.0  100.0  100.0  100.0  100.0
  1.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  2.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  3.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  4.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0
  5.00  100.0  100.0  100.0  100.0  100.0   70.2   70.2    0.0

Unresolved[edit]

Mass flow ratio (floor) for diag sensor pressure in CP[edit]

Ref: Mass flow ratio (floor) for diag sensor pressure in CP

Brief description: KF_FMS_HFMPL_MN

Dimension: 2D, table

Categories: MAF

Unit info: 1/min, % --> -

Breakpoints: Mass flow ratio (floor) for diag sensor pressure in CP X (autogen) vs Mass flow ratio (floor) for diag sensor pressure in CP Y (autogen)

Base: 

         10.0   15.0   20.0   30.0   40.0   50.0
  2500  0.250  0.250  0.250  0.250  0.250  0.250
  5000  0.500  0.500  0.500  0.500  0.500  0.500
  7500  0.500  0.500  0.500  0.500  0.500  0.500
 10000  0.500  0.500  0.500  0.500  0.500  0.500
 12500  0.600  0.600  0.600  0.600  0.450  0.450
 15000  0.600  0.600  0.600  0.600  0.450  0.450

Difference: 

         10.0   15.0   20.0   30.0   40.0   50.0
  2500  0.150  0.150  0.150  0.150  0.150  0.150
  5000  0.000  0.000  0.000  0.000  0.000  0.000
  7500  0.100  0.100  0.100  0.100  0.100  0.100
 10000  0.100  0.100  0.100  0.100  0.100  0.100
 12500  0.000  0.000  0.000  0.000  0.150  0.150
 15000  0.000  0.000  0.000  0.000  0.150  0.150

Modified: 

         10.0   15.0   20.0   30.0   40.0   50.0
  2500  0.400  0.400  0.400  0.400  0.400  0.400
  5000  0.500  0.500  0.500  0.500  0.500  0.500
  7500  0.600  0.600  0.600  0.600  0.600  0.600
 10000  0.600  0.600  0.600  0.600  0.600  0.600
 12500  0.600  0.600  0.600  0.600  0.600  0.600
 15000  0.600  0.600  0.600  0.600  0.600  0.600

Notes: 

  Opinions seem divided on what this table is. It appears to be definining a range for a plausibility check for mass flow. Outside which it considers the MAF sensor implausible and switches to the the charge pipe sensor? The values, though, are not MAF in g/s and it's not clear what the axis represent either. A few questions to answer here, perhaps with the help of the FRM.

Unmodified tables[edit]

Intake Waterpump flow ( IAT minus ambient temp, ambient temp) (Boost)

Boost Ceiling (Boost)

Lower speed threshold for leak detection (Untere Drehzahlschwelle f. Leckageerkennung) (Boost)

Maximum target boost pressure due to diagnosis of the boost pressure sensor (Maximaler Sollladedruck wegen Diagnose Ladedrucksensor) (Boost)

Boost set limit (Boost)

Boost Limit multiplier (Boost)

Compressor characteristic with required compressor / turbine power (Boost)

Min. boost setpoint to cancel PIDs by decreasing target pressure (Boost)

Perf display scaling - power (Boost)

Perf display scaling - torque (Boost)

PID correction ceiling (Boost, WGDC)

PID correction floor (Boost, WGDC)

WGDC P factor (Boost, WGDC)

WGDC D-Factor (Boost, WGDC)

WGDC D correction (Boost, WGDC)

WGDC D correction (spool) (Boost, WGDC)

WGDC P correction (Boost, WGDC)

WGDC P correction (spool) (Boost, WGDC)

Wastegate Position - für Vorsteuerung (Boost, WGDC)

Max factor for the increase of WGDC due to P and D (Boost, WGDC)

Max load for L-stoich Adapt. (Fuel)

Fuel scalar 1 (Fuel)

Lambda ceiling component protection - filling (Fuel)

EGT Pre-cat Ceiling for switch to component protection (Fuel)

EGT Cat Ceiling for switch to component protection (Fuel)

EGT Turbo Ceiling for switch to component protection (Fuel)

Lambda min. component protection (Fuel)

EKP control speed in PWM (Fuel)

Max rail diff (Fuel)

Lambda Limit (Rich) (Fuel)

Lambda setpoint for single Injection (Fuel)

Lambda setpoint for single injection at throttled operation mode (Fuel)

Lambda setpoint for multiple Injection (Fuel)

Lambda setpoint for multiple Injection at throttled operation mode (Fuel)

Injection map Factor Efficiency High-pressure pump (Fuel)

Min load for load limiting from fueling (Fuel)

Kennfeld Basis-Rk Menge VVT Betrieb (Fuel)

Kennfeld Basis-Rk Menge gedrosselter Betrieb (Fuel)

Fuel (Bank 2) (Fuel)

Fuel (Bank 1) (Fuel)

Switch to run fuel maps and not 1.0 - set to FF (Fuel)

Time before a new enrichment interdiction is forbidden - set 255 (Fuel)

Enrichment interdiction delay (Fuel)

HPFP HDR Weighting Factor I-Component (Fuel)

HPFP HDR Weighting Factor P-Component (Fuel)

HPFP HDR I-component (Fuel)

HPFP HDR P-component (Fuel)

HPFP HDR Temperature Factor P-Component (Fuel)

HPFP RPM Limit for HDR-Error (Fuel)

MSV Pre-control fuel temperature offset (Fuel)

HPFP Gain Feed Forward (Fuel)

Start and Warmup Enrichment (Ethanol Compensation) (MHD+ Suite, FlexFuel, Fuel)

Conversion factor fuel mass to injection time (Injector Slope) (Fuel)

Temp. based correction factor 2 (Ignition)

Temp. based correction factor 1 (Ignition)

Timing (spool) 2 (Ignition)

Timing (spool) (Ignition)

Timing (cold) 2 (Ignition)

Timing (cold) (Ignition)

Timing (main) 2 (Ignition)

Timing (main) (Ignition)

Dyn. correction (Ignition)

Factor for dyn. corrections based on speed and gear (AT) (Ignition)

Factor for dyn. corrections based on IAT and Retard (AT) (Ignition)

Factor for dyn. corrections based on speed and gear (MT) (Ignition)

Factor for dyn. corrections based on IAT and Retard (MT) (Ignition) 

 	Temp. based correction 2 (spool) (Ignition)

Temp. based correction 1 (spool) (Ignition)

Temp. based correction 2 (main) (Ignition)

Temp. based correction 1 (main) (Ignition)

Knock Factor (Cyl 1) (Ignition)

Knock Factor (Cyl 2) (Ignition)

Knock Factor (Cyl 3) (Ignition)

Knock Factor (Cyl 4) (Ignition)

Knock Factor (Cyl 5) (Ignition)

Knock Factor (Cyl 6) (Ignition)

Torque Reduction Factor (RPM) (Limits)

Normierung für Mdk_ist_sot_mem_mx (Limits)

Max calculated power (Limits)

Load limit factor by rich for component protection (Limits)

Max naturally aspirated volumetric efficiency (Limits)

Switch recognition stalling (Limits)

Max Torque at clutch (monitoring) (Limits)

Maximal actual torque (Limits)

Max allowed actual torque, injection active. (Limits)

Maximum for CltPrt_MdDec (Limits, Torque limiting maps)

Maximum for CltPrt_MdDec_P (Limits, Torque limiting maps)

Minimum for CltPrt_MdDec_P (Limits, Torque limiting maps)

Maximum torque for integral component PI controller (Limits, Torque limiting maps)

Max. torque at trans AT (Limits, Torque limiting maps)

Speed-dependent boost characteristic curve (Nkw_opt) for manual shift (Limits, Torque limiting maps)

Speed-dependent boost characteristic curve (Nkw_opt) (Limits, Torque limiting maps)

Performance gauge scaling (Load)

Max load (spool) (Load)

Max load (main) (Load)

Max load (octane) (Load)

Max load (octane - sport) (Load)

Max load (timing correction) (Load)

Max load (timing correction - sport) (Load)

Load to torque (Load)

Load limit due to EKP maximum value (Load)

Switch load limit component protection at rich lambda (Load)

Throttle aggression in overload (Throttle)

Rev match active depending on DSC Mode (Throttle)

Rev match (Throttle)

Vanos EX Spool (warm) 1 (Vanos)

Vanos EX (warm) 2 (Vanos)

Vanos EX (warm) 1 (Vanos)

Vanos EX (cold) 2 (Vanos)

Vanos EX (cold) 1 (Vanos)

Vanos IN Spool (warm) 1 (Vanos)

Max valve lift (10ms) (Vanos)

Maximum intake valve lift (Kennfeld maximaler Einlassventilhub) (Vanos)

Valvetronic at start (tmot) (Vanos)

Valve lift (main) (Vanos)

213A37 (Toggles)

MHD - codes list to deactivate (Toggles)

Max. speed for burble (Exhaust)

Min. speed for burble (Exhaust)

Max. temp pre turbo for burble (Exhaust)

Max. temp post cat for burble (Exhaust)

Min. engine temp for burble (Exhaust)

Max. cat temp for burble after X uses (Exhaust)

Max. rpm for burble per gear (Exhaust)

Min. rpm for burble per gear (Exhaust)

Burble duration sport (custom) (Exhaust)

Moment reserve after start (Exhaust)

Burble AFR (Exhaust)

Offset fuer Faktor fuer Schubblubbern bei Rueckschaltung (Exhaust)

Activation burble based on DSC and Mode (Exhaust)

Deactivate burble by clutch use (Exhaust)

Status Sportmodus (Exhaust)

Codewort für Abgasklappensteuerung (Exhaust)

Codewort für Abgasklappensteuerung über stegsprog (Exhaust)

Exhaust flap open at warm startup - min engine temp (Exhaust)

OPF particle filter activation (Exhaust)

OPF Switch pressure sensor (Exhaust)

Fan PWM based on coolant act to target delta (Cooling)

Coolant target (normal) (Cooling)

Coolant target (high) (Cooling)

Coolant target (warmup-vWM) (Cooling)

Coolant target (misc) (Cooling)

Coolant Target (Max) (Cooling)

Anpassung des Moments für die Performanceanzeige0 (Dev)

Deltazündwinkel Hysterese für Zwmin-Motorschutz (Dev)

Zwmin für Brenngrenze warm bei Pfad2 (Dev)

Zwmin für Brenngrenze warm bei Pfad1 (Dev)

Zwmin für Brenngrenze kalt bei Pfad2 (Dev)

Zwmin für Brenngrenze kalt bei Pfad1 (Dev)

Zwmin für Motorschutz warm (Dev)

Zwmin für Motorschutz kalt (Dev)

Kennlinie für das (Absolut-Sollmoment ahängige) Offsets-Moment (Dev)

Anzugszeit für stromreduzierte Ansteuerung (Dev)

indiziertes Soll-Moment für VMAX-Begrenzung (Dev)

Kennlinie für P-Glied bei Vmax-Regelung (Dev)

Kennlinie für Vmax-Regler-Abschaltschwelle (Dev)

Kennlinie für Vmax-Hystereseschwelle (Dev)

Kennlinie für Vmax-Vorhaltschwelle (Dev)

Kennlinie für I-Steigung der Vmax-Regelung (Dev)

Geschwindigkeit-Prädiktionshorizont für VMAX-Regelung (Dev)

Minimale Fahrgeschwindigkeit (Dev)

Offset Vorsteuerung MSV (Dev)

Mass flow ratio (ceiling) for diag sensor pressure in CP (MAF)

Mass flow ratio (ceiling) for diag MAF (MAF)

Mass flow ratio (floor) for diag MAF (MAF)

Retrieved from ‘https://b58.wiki:443/w/index.php?title=Apprentice:_understanding_the_MPPSK_map&oldid=418’