Anonymous
Not logged in
Talk
Contributions
Create account
Log in
B58 Wiki
Search
Editing
DME table reference
(section)
From B58 Wiki
Namespaces
Page
Discussion
More
More
Page actions
Read
Edit
History
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Fuel == === Max load for L-stoich Adapt. === '''Brief Description''': BMWinjafs_fac_RatAirMax_T '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': 1/min --> - '''Breakpoints''': Max load for L-stoich Adapt. X (autogen) '''Example''': 1900 2000 2500 3000 3200 3300 176.0 176.0 176.0 176.0 176.0 176.0 '''Notes''': The stage 1 map sets these values according to its max load. === Fuel scalar 1 === '''Brief description''': KF_FRKKORRF_1 '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> - '''Breakpoints''': Fuel scalar 1 X (autogen) vs Fuel scalar 1 Y (autogen) '''Example''': 0.0 100.0 200.0 300.0 400.0 500.0 600.0 700.0 800.0 900.0 1000.0 1100.0 1200.0 1300.0 1400.0 1500.0 0.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 3.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 4.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 6.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 7.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 8.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 9.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 11.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 12.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 13.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 14.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 15.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 '''Notes''': The fuel scalar table is a map of RPM and load to fuel quantity multiplier. It acts to modify the fuel quantity that the DME injects in order to meet its lambda target. For normal 95 or 98 RON tunes, this table can be left as is but for ethanol and flexfuel tunes, it must be edited so as to maintain acceptable fuel trims. Edits to this table are also used to dial back DI fuel delivery in PI tunes. In that case, it is important to scale the breakpoints correctly. === Lambda ceiling component protection - filling === '''Brief description''': KF_BSLGF '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> - '''Breakpoints''': Lambda ceiling component protection - filling X (autogen) vs Lambda ceiling component protection - filling Y (autogen) '''Example''': 0 3000 5000 7000 0.000 11.025 11.025 11.025 11.025 10.000 11.025 11.025 11.025 11.025 60.000 11.025 11.025 11.025 11.025 100.000 11.025 11.025 11.025 11.025 '''Notes''': This table provides an AFR target for when the DME enters component protection mode. The stock values above are extremely rich, so we can see it is really shoving fuel to cool things down. Somewhat more reasonable targets around 12 are common. === EGT Pre-cat Ceiling for switch to component protection === '''Brief description''': KF_TA_VKSOLL '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> °C '''Breakpoints''': EGT Pre-cat Ceiling for switch to component protection X (autogen) vs EGT Pre-cat Ceiling for switch to component protection Y (autogen) '''Example''': 2250.000 3000.000 4500.000 6500.000 40.000 900.000 900.000 900.000 900.000 80.000 900.000 900.000 900.000 900.000 150.000 900.000 900.000 900.000 900.000 180.000 900.000 900.000 900.000 900.000 '''Notes''': Stage 1 increases the calculated exhaust temp required for a switch to component protection mode. But note the fuelling change to richen the mixture below. === EGT Cat Ceiling for switch to component protection === '''Brief description''': KF_TA_IKSOLL '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> °C '''Breakpoints''': EGT Cat Ceiling for switch to component protection X (autogen) vs EGT Cat Ceiling for switch to component protection Y (autogen) '''Example''': 0.000 2000.000 4000.000 7000.000 0.000 950.000 950.000 950.000 950.000 10.000 950.000 950.000 950.000 950.000 60.000 950.000 950.000 950.000 950.000 100.000 950.000 950.000 950.000 950.000 '''Notes''': We're seeing that on the stock map, the max turbo temp allowable is around 980 degrees and the max cat temp is around 950 degrees. The stage 1 map increases each value by 100 degress respectively. === EGT Turbo Ceiling for switch to component protection === '''Brief description''': KF_TA_ATLSOLL '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> °C '''Breakpoints''': EGT Turbo Ceiling for switch to component protection X (autogen) vs EGT Turbo Ceiling for switch to component protection Y (autogen) '''Example''': 4000.000 5000.000 5500.000 5900.000 70.000 980.000 980.000 980.000 980.000 100.000 980.000 980.000 980.000 980.000 130.000 980.000 980.000 980.000 980.000 160.000 980.000 980.000 980.000 980.000 '''Notes''': Some more temperature bumps before hitting component protection. === Lambda min. component protection === '''Brief description''': K_BS_MN '''Dimension''': constant '''Categories''': Fuel '''Units''': - '''Example''': 10.73 '''Notes''': The stock setting seems too rich. The stage 1 map sets what appears to be a more sensible value. === EKP control speed in PWM === '''Brief Description''': BMWlpa_rat_EfpPwm_T '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': 1/min --> - '''Breakpoints''': EKP Ansteuerung Drehzahl in PWM X (autogen) === Max rail diff === '''Brief Description''': BMWlpsd_p_RailDifMax_T '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': MPa --> MPa '''Breakpoints''': Max rail diff X (autogen) '''Example''': 10 20 30 35 3.5 3.5 3.5 3.5 '''Notes''': Max rail diff in MPa (1 MPa = 10 bar). Given that the fuel system operates at 200 bar, the 90 bar set in the stage 1 map is basically removing this limit, except in failure scenarios. === Lambda Limit (Rich) === '''Brief description''': KF_LAMIN_H '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> - '''Breakpoints''': Lambda Limit (Rich) X (autogen) vs Lambda Limit (Rich) Y (autogen) === Rail Pressure HOMOGEN COLD - with activated VVT (GD), 1/1 === '''Brief description''': KF_PRAIL_H_K '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': , --> '''Breakpoints''': Rail Pressure HOMOGEN COLD - with activated VVT (GD), 1/1 X (autogen) vs Rail Pressure HOMOGEN COLD - with activated VVT (GD), 1/1 Y (autogen) === Rail Pressure HOMOGEN COLD - with deactivated VVT (GD) === '''Brief description''': KF_PRAIL_HGD_K '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': , --> '''Breakpoints''': Rail Pressure HOMOGEN COLD - with deactivated VVT (GD) X (autogen) vs Rail Pressure HOMOGEN COLD - with deactivated VVT (GD) Y (autogen) === Rail Pressure HOMOGEN - with deactivated VVT (GD) === '''Brief description''': KF_PRAIL_HGD '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': , --> '''Breakpoints''': Rail Pressure HOMOGEN - with deactivated VVT (GD) X (autogen) vs Rail Pressure HOMOGEN - with deactivated VVT (GD) Y (autogen) === Rail pressure homogen === '''Brief description''': KF_PRAIL_H '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> MPa '''Breakpoints''': Rail pressure homogen X (autogen) vs Rail pressure homogen Y (autogen) === Lambda setpoint for single Injection === '''Brief description''': BMWchas_lam_InjSng_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, Nm --> - '''Breakpoints''': Lambda setpoint for single Injection X (autogen) vs Lambda setpoint for single Injection Y (autogen) '''Example''': 704 992 1504 2016 4000 4500 5000 5500 6000 6500 75 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 100 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 125 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 150 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 175 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 200 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 225 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 250 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 300 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 350 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 '''Notes''': The curious thing about this table is that the rows, which are in units of Nm, are only scaled to 350 Nm. The setpoint in this single injection table is equal to the multiple injection table. === Lambda setpoint for single injection at throttled operation mode === '''Brief description''': BMWchas_lam_InjSngThr_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, Nm --> - '''Breakpoints''': Lambda setpoint for single injection at throttled operation mode X (autogen) vs Lambda setpoint for single injection at throttled operation mode Y (autogen) '''Example''': 704 992 1504 2016 4000 6016 6017 6018 6019 6020 75 14.700 14.700 14.700 14.700 14.700 14.495 14.495 14.495 14.495 14.495 100 14.700 14.700 14.700 14.700 14.700 14.348 14.348 14.348 14.348 14.348 150 14.700 14.700 14.700 14.700 14.610 14.201 14.201 14.201 14.201 14.201 200 14.700 14.700 14.700 14.700 14.524 14.097 14.097 14.097 14.097 14.097 250 14.700 14.700 14.700 14.700 14.434 13.993 13.993 13.993 13.993 13.993 350 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 351 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 352 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 353 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 354 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 '''Notes''': More richening in the stage 1 map. === Lambda setpoint for multiple Injection === '''Brief description''': BMWchas_lam_InjMpl_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, Nm --> - '''Breakpoints''': Lambda setpoint for multiple Injection X (autogen) vs Lambda setpoint for multiple Injection Y (autogen) '''Example''': 704 992 1504 2016 4000 4500 5000 5500 6000 6500 75 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 100 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 125 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 150 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 175 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 200 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 225 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 250 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 300 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 350 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 14.628 === Lambda setpoint for multiple Injection at throttled operation mode === '''Brief description''': BMWchas_lam_InjMplThr_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, Nm --> - '''Breakpoints''': Lambda setpoint for multiple Injection at throttled operation mode X (autogen) vs Lambda setpoint for multiple Injection at throttled operation mode Y (autogen) '''Example''': 704.000 992.000 1504.000 2016.000 4000.000 6016.000 6017.000 6018.000 6019.000 6020.000 75.000 14.700 14.700 14.700 14.700 14.700 14.495 14.495 14.495 14.495 14.495 100.000 14.700 14.700 14.700 14.700 14.700 14.348 14.348 14.348 14.348 14.348 150.000 14.700 14.700 14.700 14.700 14.610 14.201 14.201 14.201 14.201 14.201 200.000 14.700 14.700 14.700 14.700 14.524 14.097 14.097 14.097 14.097 14.097 250.000 14.700 14.700 14.700 14.700 14.434 13.993 13.993 13.993 13.993 13.993 350.000 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 351.000 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 352.000 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 353.000 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 354.000 14.700 14.700 14.700 14.700 14.216 13.788 13.788 13.788 13.788 13.788 '''Notes''': More richening. === Rail pressure setpoint for single injection === '''Brief description''': BMWchas_p_RailInjSng_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': , --> MPa '''Breakpoints''': Rail pressure setpoint for single injection X (autogen) vs Rail pressure setpoint for single injection Y (autogen) === Rail pressure setpoint for multiple injection === '''Brief description''': BMWchas_p_RailInjMpl_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': , --> MPa '''Breakpoints''': Rail pressure setpoint for multiple injection X (autogen) vs Rail pressure setpoint for multiple injection Y (autogen) === Rail min. undershoot (monitor) === '''Brief description''': K_MSVANST_DIFFPRAIL '''Dimension''': constant '''Categories''': Fuel '''Units''': === Injection map Factor Efficiency High-pressure pump === '''Brief description''': BMWinjmon_fac_HppEff_M '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, MPa --> - '''Breakpoints''': Injection map Factor Efficiency High-pressure pump X (autogen) vs Injection map Factor Efficiency High-pressure pump Y (autogen) === Min load for load limiting from fueling === '''Brief Description''': KL_RFMIN_KRSTSYS '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': 1/min --> % '''Breakpoints''': Min load for load limiting from fueling X (autogen) '''Example''': 500 1000 2500 3000 4000 5000 6000 7000 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 '''Notes''': The stage 1 map effectively removes this limit, given that this is beyond that max load. === Max Rail Pressure for Engine Start === '''Brief description''': Maximaler Raildruck-Sollwert fuer Motorstart, 1/1 '''Dimension''': constant '''Categories''': Fuel '''Units''': === Kennfeld Basis-Rk Menge VVT Betrieb === '''Brief description''': KF_ST_RKBAS_VVT '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, °C --> % '''Breakpoints''': Kennfeld Basis-Rk Menge VVT Betrieb X (autogen) vs Kennfeld Basis-Rk Menge VVT Betrieb Y (autogen) === Kennfeld Basis-Rk Menge gedrosselter Betrieb === '''Brief description''': KF_ST_RKBAS_GD '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, °C --> % '''Breakpoints''': Kennfeld Basis-Rk Menge gedrosselter Betrieb X (autogen) vs Kennfeld Basis-Rk Menge gedrosselter Betrieb Y (autogen) === Lambda threshold from which a richening request from fuel maps (KF_LABAS_XXX) is suppressed === '''Brief description''': K_LA_FETTDELAY '''Dimension''': constant '''Categories''': Fuel '''Units''': - '''Example''': 1.000 '''Notes''': EcuTek's guide states 'Set this to the leanest value you want to run out of "lambda 1", typically Lambda 0.9, do not set this to a rich value.' Notetheless, the MHD stage-1 map does set this very rich. === Fuel (Bank 2) === '''Brief description''': KF_LABAS_2 '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> - '''Breakpoints''': Fuel (Bank 2) X (autogen) vs Fuel (Bank 2) Y (autogen) '''Example''': 500 750 1000 1250 1500 2000 2250 2500 3000 3500 4000 4500 5000 5500 5750 6000 6500 6950 20 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 30 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.406 40 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.406 50 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.259 14.259 60 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.449 14.111 70 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.729 14.700 14.700 80 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.743 14.628 14.707 14.409 90 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.757 14.700 14.553 14.047 14.115 100 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.399 14.259 14.011 13.526 13.530 110 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.481 13.997 13.745 13.480 13.308 13.379 120 13.964 13.964 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.230 13.702 13.376 13.153 12.863 12.866 130 13.817 13.817 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.743 14.140 13.745 13.347 13.128 12.855 12.644 12.644 140 13.523 13.670 13.964 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.140 13.817 13.379 12.938 12.583 12.414 12.202 12.202 150 13.229 13.229 13.523 14.700 14.700 14.700 14.700 14.700 14.700 14.259 13.745 13.394 13.006 12.554 12.202 11.972 11.908 11.908 160 12.934 12.934 12.934 13.964 13.964 13.964 13.964 13.964 13.964 13.523 13.225 12.791 12.496 12.112 11.761 11.678 11.614 11.614 170 12.934 12.934 12.934 13.229 13.229 13.964 13.964 13.670 13.964 12.934 13.078 12.342 12.077 11.965 11.761 11.531 11.466 11.466 180 12.934 12.934 12.934 12.934 13.229 13.964 13.964 13.523 13.523 12.644 12.934 12.417 11.976 11.818 11.614 11.384 11.319 11.319 '''Notes''': The stage 1 map equalizes the bank 1 and bank 2 settings and richens the mixture at higher loads. The row breakpoints are unchanged and still map upto 180% load. === Fuel (Bank 1) === '''Brief description''': KF_LABAS_1 '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': 1/min, % --> - '''Breakpoints''': Fuel (Bank 2) X (autogen) vs Fuel (Bank 2) Y (autogen) '''Example''': 500 750 1000 1250 1500 2000 2250 2500 3000 3500 4000 4500 5000 5500 5750 6000 6500 6950 20 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 30 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 40 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 50 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 60 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 70 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 80 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 90 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 100 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.564 110 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.255 120 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.481 14.111 13.534 130 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.259 13.745 13.437 13.020 140 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 13.964 13.555 13.182 12.884 12.715 150 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.040 13.290 13.017 12.791 12.593 12.353 160 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.111 13.376 12.848 12.694 12.579 12.425 12.159 170 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.582 13.907 13.089 12.622 12.439 12.385 12.145 12.023 180 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.700 14.424 13.713 12.798 12.396 12.260 12.202 11.998 11.904 === Rail Pressure Target Switch (CILCN) === '''Brief description''': S_PRAIL_GL_LA1 '''Dimension''': constant '''Categories''': Fuel '''Units''': === Switch to run fuel maps and not 1.0 - set to FF === '''Brief description''': S_AUSWAHL_FETTDELAY '''Dimension''': constant '''Categories''': Fuel '''Units''': - '''Example''': 0 '''Notes''': Stage 1 does not set this to FF. === Time before a new enrichment interdiction is forbidden - set 255 === '''Brief description''': K_T_FETTDELAY_SPERR '''Dimension''': constant '''Categories''': Fuel '''Units''': s === Enrichment interdiction delay === '''Brief description''': KF_TD_FETTDELAY_TABG '''Dimension''': 2D, table '''Categories''': Fuel '''Unit info''': °C, 1/min --> s '''Breakpoints''': Enrichment interdiction delay X (autogen) vs Enrichment interdiction delay Y (autogen) === HPFP HDR Weighting Factor I-Component === '''Brief Description''': Wichtungsfaktor PI-Regler-Parameter HDR; I-Anteil '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': RPM --> '''Breakpoints''': HPFP HDR Weighting Factor I-Component X (autogen) === HPFP HDR Weighting Factor P-Component === '''Brief Description''': Wichtungsfaktor PI-Regler-Parameter HDR; P-Anteil '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': RPM --> '''Breakpoints''': HPFP HDR Weighting Factor P-Component X (autogen) === HPFP HDR I-component === '''Brief Description''': KLIHDR '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': MPa --> '''Breakpoints''': HPFP HDR I-component X (autogen) === HPFP HDR P-component === '''Brief Description''': KLPHDR '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': MPa --> '''Breakpoints''': HPFP HDR I-component X (autogen) === HPFP HDR Temperature Factor P-Component === '''Brief Description''': KLPHDRTF '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': Grad C --> - '''Breakpoints''': HPFP HDR Temperature Factor P-Component X (autogen) === HPFP RPM Limit for HDR-Error === '''Brief description''': Drehzahlgrenze bei HDR-Fehler HDR=Rail Pressure Regulation '''Dimension''': constant '''Categories''': Fuel '''Units''': === MSV Pre-control fuel temperature offset === '''Brief Description''': KLFVSTOTF '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': Grad C --> - '''Breakpoints''': MSV Pre-control fuel temperature offset X (autogen) === HPFP Gain Feed Forward === '''Brief Description''': KLVSTMSVG '''Dimension''': 1D, vector '''Categories''': Fuel '''Unit info''': RPM --> '''Breakpoints''': Offset Vorsteuerung MSV Y (autogen) === Conversion factor fuel mass to injection time (Injector Slope) === '''Brief description''': MK2TE '''Dimension''': constant '''Categories''': Fuel '''Units''': ms * Hub/mg
Summary:
Please note that all contributions to B58 Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see
B58 Wiki:Copyrights
for details).
Do not submit copyrighted work without permission!
Cancel
Editing help
(opens in new window)
Navigation
Navigation
Main page
Resources for getting started
MHD Logging
How the performance gauges work
Understanding the MPPSK map
Creating a stage 1 map
Timing
Boost control
Recent changes
Random page
Help about MediaWiki
Wiki tools
Wiki tools
Special pages
Page tools
Page tools
User page tools
More
What links here
Related changes
Page information
Page logs