Anonymous
Not logged in
Talk
Contributions
Create account
Log in
B58 Wiki
Search
Editing
DME table reference
(section)
From B58 Wiki
Namespaces
Page
Discussion
More
More
Page actions
Read
Edit
History
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
== MHD+ Suite == === Boost Ceiling (Relative) (Gear x RPM) (Map 1) === '''Brief description''': MHD+ custom table that replaces the single cell Boost Ceiling (when enable byte is set in MHD+ Config). Units are PSI, relative. This ceiling is applied to the intake manifold boost target. TMAP boost target is derived from this by multiplying it by the factor output from KF_PSPLD_ECO / DYN tables. '''Dimension''': 2D, table '''Categories''': MHD+ Suite, Custom Base Tables, Boost '''Unit info''': RPM, Gear --> psi (relative) '''Breakpoints''': Boost Ceiling (Relative) (Gear x RPM) (Map 1) - RPM vs Boost Ceiling (Relative) (Gear x RPM) (Map 1) - Gear === Enable Custom WGDC Override === '''Brief description''': Setting to 1 will override the base WGDC % with the value from our MHD+ Custom WGDC Base table '''Dimension''': constant '''Categories''': MHD+ Suite, Custom Base Tables, WGDC '''Units''': === Enable Custom WGDC P and D Factors === '''Brief description''': Setting to 1 will apply the output of our MHD+ Custom WGDC P and D factor tables to WGDC base. '''Dimension''': constant '''Categories''': MHD+ Suite, Custom Base Tables, WGDC '''Units''': === Start and Warmup Enrichment (Ethanol Compensation) === '''Brief description''': The factor output of this table is applied (multiplied) to fuel at start, warmup enrichment, and hot restart automatically for map slots that are either FlexFuel enabled or have a static ethanol content set. '''Dimension''': 2D, table '''Categories''': MHD+ Suite, FlexFuel, Fuel '''Unit info''': Ethanol Content, Tmot °C --> - '''Breakpoints''': Start and Warmup Enrichment (Ethanol Compensation) - Ethanol Content vs Start and Warmup Enrichment (Ethanol Compensation) - Tmot === Antilag Timing (Base) === '''Brief description''': '''Dimension''': 2D, table '''Categories''': MHD+ Suite, Antilag '''Unit info''': 1/min, psi --> *crk '''Breakpoints''': Antilag Timing (Base) - RPM vs Antilag Timing (Base) - Boost Target === Antilag Timing (P-Factor) === '''Brief description''': '''Dimension''': 2D, table '''Categories''': MHD+ Suite, Antilag '''Unit info''': 1/min, boost deviation (psi) --> *crk '''Breakpoints''': Antilag Timing (P-Factor) - RPM vs Antilag Timing (P-Factor) - Boost Deviation === Antilag Boost Target === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, Antilag '''Unit info''': psi --> psi '''Breakpoints''': <labels> === Antilag Fuel Target === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, Antilag '''Unit info''': AFR --> AFR '''Breakpoints''': <labels> === Antilag Coolant Safety (Minimum) === '''Brief description''': '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': °C === Antilag Coolant Safety (Maximum) === '''Brief description''': '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': °C === Antilag EGT Safety (Maximum) === '''Brief description''': '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': °C === Enable Antilag === '''Brief Description''': enable: 1 disable : 0 '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, Antilag '''Unit info''': --> '''Breakpoints''': <labels> === Antilag Cooldown Timer === '''Brief description''': time required before using antilag again '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': s === Antilag Timeout === '''Brief description''': max time allowed for the current antilag use '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': s === Antilag Start Delay === '''Brief description''': time in seconds until antilag activates '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': s === Enable Antilag Compressor Map and P-Fac Tables (during antilag) === '''Brief description''': enable: 1 disable : 0 Note: this is overriden by our custom boost control if the "Enable Custom WGDC Override" byte it set (in Custom Base Tables > WGDC). '''Dimension''': constant '''Categories''': MHD+ Suite, Antilag '''Units''': === Antilag Compressor Map with Required Compressor / Turbine Power === '''Brief description''': BMWtchctr_pwr_Pctl_M (antilag) '''Dimension''': 2D, table '''Categories''': MHD+ Suite, Antilag '''Unit info''': -, g/s --> kW '''Breakpoints''': Antilag Compressor Map with Required Compressor / Turbine Power - Boost Setpoint Factor vs Antilag Compressor Map with Required Compressor / Turbine Power - Air Mass Flow === Antilag WGDC P-Factor (Pressure Differential) === '''Brief description''': BMWtchctr_p_DifCrtnPp_M (antilag) '''Dimension''': 2D, table '''Categories''': MHD+ Suite, Antilag '''Unit info''': hPa, g/s --> hPa '''Breakpoints''': Antilag WGDC P-Factor (Pressure Differential) - Boost Deviation vs Antilag WGDC P-Factor (Pressure Differential) - Air Mass Flow === Enable KnockCEL === '''Brief description''': '''Dimension''': constant '''Categories''': MHD+ Suite, Knock CEL '''Units''': === KnockCEL Load Threshold (Minimum) === '''Brief description''': knockCEL is only active above this load '''Dimension''': constant '''Categories''': MHD+ Suite, Knock CEL '''Units''': % === KnockCEL Pedal Threshold (Minimum) === '''Brief description''': knockCEL is only active above this pedal percentage '''Dimension''': constant '''Categories''': MHD+ Suite, Knock CEL '''Units''': % === KnockCEL Single Cyl Total === '''Brief description''': single cyl's timing corrections to trigger knockCEL '''Dimension''': constant '''Categories''': MHD+ Suite, Knock CEL '''Units''': *crk === KnockCEL Sum Total === '''Brief description''': sum of each cyl's timing corrections to trigger knockCEL '''Dimension''': constant '''Categories''': MHD+ Suite, Knock CEL '''Units''': *crk === Enable Map Switch === '''Brief description''': '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': === Active Map Slots === '''Brief description''': max number of map slots you wish to be selectable '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': === Enable Custom 3D Boost Ceiling Table === '''Brief description''': Setting to 1 uses the custom MHD+ Gear x RPM boost ceiling tables instead of the OEM single cell table. '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': '''Example''': 195 === Enable FlexFuel === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, MHD+ Config '''Unit info''': --> '''Breakpoints''': <labels> === Enable Individual FF#2 Blending === '''Brief description''': Setting to 1 will blend from map slot to FF#2 for ipol factors greater than 1.0. Any other value keeps the default functionality where ipol factors greater than 1.0 blend from FF to FF#2. Example with toggle set to 0: ipol factors 0 - 1 blend from map slot to FF1 ipol factors 1.01 - 2 blend from FF1 to FF2 Example with toggle set to 1: ipol factors 0 - 1 blend from map slot to FF1 ipol factors 1.01 - 2 blend from map slot to FF2 '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': === Static Ethanol Content (Map 1) === '''Brief description''': Setting to a value > 0 will override (or substitute) the E% value coming from your CANBUS ECA. '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': '''Example''': 195 === Inhibit Steering Wheel Cruise Controls === '''Brief description''': 0: allow steering wheel cruise buttons to control mapswitch / antilag; 1: disable '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': === Inhibit BC Button Controls === '''Brief description''': 0: allow BC button to control mapswitch; 1: disable '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': === Enable Port Injection Safety === '''Brief description''': Set to 1 to enable; Will cut each cylinder's coil when the corresponding injector is cut. '''Dimension''': constant '''Categories''': MHD+ Suite, MHD+ Config '''Units''': === Sensor Preset Selection === '''Brief description''': 00 - Disabled / Not Used 01 - MHD CANBUS ECA 02 - Motiv ReFlex 03 - Zeitronix CANBUS ECA '''Dimension''': constant '''Categories''': MHD+ Suite, CANBUS Sensor 1 (Ethanol / PI) '''Units''': === Sensor Installed on PT-CAN2 === '''Brief description''': Set to 01 only if this sensor is wired to PT-CAN2. Otherwise 0. '''Dimension''': constant '''Categories''': MHD+ Suite, CANBUS Sensor 1 (Ethanol / PI) '''Units''': === Use Alternate CAN ID for Message Reception === '''Brief description''': 00: No change to sensor preset CANBUS setup. 01: Alternate ID #1. Use this only if you have applied the alternate CAN ID patch on your Motiv ReFlex (or other appropriate CAN device). Some G-series vehicles require this. 02+: Unused, treated as 0. '''Dimension''': constant '''Categories''': MHD+ Suite, CANBUS Sensor 1 (Ethanol / PI) '''Units''': === Ethanol Content Substitute Value (Error) === '''Brief description''': this will be used as the ethanol percent value if the CANBUS signal times out or the sensor reports an error / water contamination '''Dimension''': constant '''Categories''': MHD+ Suite, CANBUS Sensor 1 (Ethanol / PI) '''Units''': Ethanol % === Codeword for MHD+ Errors (Inhibit Limp) === '''Brief description''': Ignore this, use the separate flags above. '''Dimension''': constant '''Categories''': MHD+ Suite, MHD Error Codes '''Units''': - === Load Interpolation (Map 1) === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, FlexFuel, Blend Factors '''Unit info''': E% --> - '''Breakpoints''': Load Interpolation (Map 1) - Ethanol Content === Fuel Interpolation (Map 1) === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, FlexFuel, Blend Factors '''Unit info''': E% --> - '''Breakpoints''': Fuel Interpolation (Map 1) - Ethanol Content === Fuel Scalar Interpolation (Map 1) === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, FlexFuel, Blend Factors '''Unit info''': E% --> - '''Breakpoints''': Fuel Scalar Interpolation (Map 1) - Ethanol Content === Timing Interpolation (Map 1) === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, FlexFuel, Blend Factors '''Unit info''': E% --> - '''Breakpoints''': Timing Interpolation (Map 1) - Ethanol Content === Knock Interpolation (Map 1) === '''Brief Description''': '''Dimension''': 1D, vector '''Categories''': MHD+ Suite, FlexFuel, Blend Factors '''Unit info''': E% --> - '''Breakpoints''': Knock Interpolation (Map 1) - Ethanol Content === ReFlex FlexFuel Sensor Absent === '''Brief description''': Set this to 1 if you do NOT have an ethanol sensor wired to your ReFlex. This will prevent the MHD005 error code and CEL entirely. '''Dimension''': constant '''Categories''': MHD+ Suite, ReFlex Integration, ReFlex Config '''Units''': - === ReFlex Aux Pressure Sensor Safety (Minimum) === '''Brief description''': will trigger a limp mode if the aux pressure data from ReFlex falls below this value as a safety '''Dimension''': constant '''Categories''': MHD+ Suite, ReFlex Integration, ReFlex Config '''Units''': psi
Summary:
Please note that all contributions to B58 Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see
B58 Wiki:Copyrights
for details).
Do not submit copyrighted work without permission!
Cancel
Editing help
(opens in new window)
Navigation
Navigation
Main page
Resources for getting started
MHD Logging
How the performance gauges work
Understanding the MPPSK map
Creating a stage 1 map
Timing
Boost control
Recent changes
Random page
Help about MediaWiki
Wiki tools
Wiki tools
Special pages
Page tools
Page tools
User page tools
More
What links here
Related changes
Page information
Page logs